HULALA HOME SCCL0360 User manual

SCCL0360

Ax1
Ex1 Fx1 Hx3Gx1
A1x1
A5x1
A2x1 A3x1 A4x1
Bx1 Cx1 Dx3
170LBS

A5
A1
A4
A3
A2
B
D
D
H
H
H
D
C
E
F
G
A
OVERVIEW

x 30 x 30 x 12 x 1 x 4
x 1 x 1
1 2 3 4 5
67x 1
8
x 1 x 1 x 1 x 1
x 1
1 2 3 5
6
B
C
1 3
STEP 1:Preparing the panel B and C.
1.Align the hole in the panel B and C , insert wooden dowel #3 into
the pre-drilled holes.
2.Align the hole in the panel B and C, screw in and tighten the cam
bolt #1 by screwdriver #7.

2
2
2
2
2
B
B
DD
D
D
D
D
E
E
2
2
2
2
2
2
2
2
2
2
2
5
5
5
C
5
STEP 2:Connect the panel B with panel D and E. Align the hole in
the panel D and E, insert cam bolt #1 and wooden dowel #3 in
panel B into panel D and E, insert and tighten the nut #2 by
screwdriver #7.
Step 3:Repeat Step 2 way to connect panel C with D and E. then
stick the hardware #5 on the bottom of panel C and B as the picture
show.
2
7
2
7

A
A
G
B
C
D
D
D
E
1
1
1
1
2
2
2
2F
B
A
D
D
D
E
C
F
1
2
2
1
11
STEP 4: Attach the panel A and G to the finished parts in step 3.
Insert the panel G into the groove in panel B, C and E.
Align the hole in panel A, screw in and tighten cam bolt #1 by
screwdriver #7, then insert the cam bolt #1 into the hole in panel B
and C. tighten the nut #2 by screwdriver #7.
STEP 5: Attach the panel F to the cabinet as the picture show.
Align the hole in the panel F, screw in cam bolt 1# by screwdriver #7.
Then insert the cam bolt #1 into the hole in panel E, tighten the nut #2
by screwdriver #7.
2
7
2
7

1
1
1
A3
A1
2
A2
A1
A3
A5
1
6
4
2
1
1
STEP 6:Preparing for panel A1,A3. screw in and tighten the cam
bolt#1 into the hole in panel A1 and A3 by screwdriver#7.
Step 7:Preparing the drawer frame.
1.Assemble the panel A1,A2 and A3. Align the hole in the panel A2,
insert the cam bolt #1 on pane A1 , A3 into the holes in panel A2.
insert the nut #2 and tighten by screwdriver#7.
2.Attach the puller #4 to the panel A5. align the hole in the panel A5
to the hole in puller, screw the screw #6 and tighten by screwdriver#7.
3.Insert and tighten the cam bolt #1 into the pre-drilled hole in panel
A5 by screwdriver#7.
2
7

A4
2
A4 A5
2
Step 8:slide in the panel A4 into the groove of A1,A2,and A3., then
attach the panel A5 to the panel A1, A3. last, put the drawer into the
cabinet as the picture show.
H
H
x3
STEP 9:Unfold the basket and put on fabric cover.
A1 A1
A3 A3
A2 A2

H
STEP 10:Put the part H into cabinet as the picture show.
Your cabinet is ready to use.
Install the anti-collapse set.
8