HUSKY LINERS 6145FR Manual

6145FR~1.DOC
Rev: 0
11/22/00
THANK YOU FOR SELECTING A HUSKY FLOOR LINER
FROM WINFIELD CONSUMER PRODUCTS
CARE AND USE INSTRUCTIONS
Your new floor liners are custom molded to fit your particular vehicle. The liners are made to take the place
of your factory floor mats. For correct fit, it is necessary to remove the factory floor mats before installing your
new floor liners. However, do not remove the factory-installed carpeting.
Your liners are made from an engineering resin that is lightweight and extremely tough and durable. The
easiest way to clean your liners is with a damp cloth or sponge. If using a cleaner, 409®or Glass Plus®work
well. Use of Armor All®, Son-of-a-Gun®or similar items is discouraged as these products make the liners slick.
INSTALLATION INSTRUCTIONS FOR YOUR SECOND SEAT
CHEVROLET TAHOE/GMC YUKON/DENALI FLOOR LINERS
YUKON DENALI OWNERS WILL NEED TO TRIM THEIR LINER TO ACCOMMODATE THE FACTORY
EQUIPPED CONSOLE. TRIM AWAY THE MATERIAL ON THE LINER THAT IS LOWERED AS
DEMONSTRATED ABOVE AND AS SHOWN ON THE PHOTOS ON THE REVERSE SIDE.
FRONT OF VEHICLE
LEFT OR
DRIVER’S
SIDE
RIGHT OR
PASSENGER’S
SIDE
NOTICE: RIGHT LINER
OVERLAPS LEFT LINER

6145FR~1.DOC
Rev: 0
11/22/00
PHOTOS OF HUSKY SECOND SEAT FLOOR LINER #6145 TRIMMED
TO FIT YUKON DENALI