HUSKY LINERS 2992 Manual

2992 Front_Back.doc
04/27/2004
THANK YOU FOR SELECTING A HUSKY FLOOR LINER
FROM WINFIELD CONSUMER PRODUCTS
CARE AND USE INSTRUCTIONS
Your new liner is custom molded to fit your vehicle. Upon removal from the box your liner will not
completely unroll and lay flat. This is normal and only temporary. Just place the liner on the floor or in the back
of your vehicle with a weight in each corner (a book works well). After about 15 minutes, your liner will remain
flat. In colder climates this “relaxing” may take longer; moving the liner inside will accelerate the process.
Your liner is manufactured using an engineering resin that is lightweight and extremely tough and durable.
The easiest way to clean your liner is with a damp cloth or sponge. If using a cleaner, 409®or Glass Plus®work
well. Use of Armor All®, Son-of-a-Gun®or similar items is discouraged as these products make the liner slick.
INSTALLATION INSTRUCTIONS FOR YOUR
CHEVROLET/GMC 1500 CREW CAB SECOND SEAT CARGO
LINER
NOTE: BEFORE INSTALLING LINER IN YOUR 1500 CREW CAB TRUCK,
YOU MUST FIRST FOLD BOTH SEAT BOTTOMS FORWARD, THEN FOLD
BOTH SEAT BACKS FORWARD. YOUR CARGO LINER IS DESIGNED TO
FIT ON TOP OF THE LOADING PLATFORM FORMED BY THE FOLDED
SEAT BACKS. YOUR CARGO LINER IS ORIENTED TO FIT WITH
NARROW END TOWARDS BACK OF CAB WALL (SEE PHOTO ON BACK
OF PAGE).
REAR OF VEHICLE

2992 Front_Back.doc
04/27/2004