HUSKY LINERS X-ACT CONTOUR 53491 Manual

53491
X-ACT CONTOUR
FLOOR LINERS
CARE AND USE INSTRUCTIONS
Thank you for selecting a X-act Contour™ Floor Liner from Winfield Consumer Products.
Your new second seat liner is custom molded to fit your Ford F150 Super Crew truck. The liner
is made to take the place of your factory floor mats.
For correct fit, it is necessary to remove
the factory floor mats before installing your new floor liners . However, do not remove the
factory-installed carpeting.
Your liner is made from an engineering resin that is lightweight and extremely tough and
durable. The easiest way to clean your liner is with a damp cloth or sponge. If using a cleaner,
409®or Glass Plus®work well. Use of Armor All®, Son-of-a-Gun®or similar items is discouraged
as these products make the liner slick.
INSTALLATION INSTRUCTIONS FOR YOUR FORD F150 SUPER CREW TRUCK SECOND SEAT
FLOOR LINER
TO EASE INSTALLATION OF YOUR NEW SUPERCREW LINER, MOVE BOTH FRONT SEATS TO
THEIR MOST REARWARD POSITION. ONCE LINER IS INSTALLED, REPOSITION THE SEATS AS
DESIRED.

53491
IF YOUR TRUCK IS EQUIPPED WITH A 40/20/40 SPLIT BENCH FRONT SEAT, YOU WILL NEED
TO TRIM YOUR LINER TO ACHIEVE THE PROPER FIT. SEE IMAGE ON BACK FOR TRIMMING
DETAILS.
TRIM LINER LEAVING AN APPROXIMATE ¼” LIP AROUND THE CUPHOLDER PROFILE AS
SHOWN IN THE IMAGES BELOW. A UTILITY KNIFE OR HEAVY SHEARS WORK WELL FOR
TRIMMING.