HUSKY LINERS 2358 Manual

2358.doc
11/04/03
THANK YOU FOR SELECTING A HUSKY FLOOR LINER
FROM WINFIELD CONSUMER PRODUCTS
CARE AND USE INSTRUCTIONS
Your new liner is custom molded to fit your vehicle. Upon removal from the box your liner will not
completely unroll and lay flat. This is normal and only temporary. Just place the liner on the floor or in the back
of your vehicle with a weight in each corner (a book works well). After about 15 minutes, your liner will remain
flat. In colder climates this “relaxing” may take longer; moving the liner inside will speed up the process.
Your liner is manufactured using an engineering resin that is lightweight and extremely tough and durable.
The easiest way to clean your liner is with a damp cloth or sponge. If using a cleaner, 409®or Glass Plus®work
well. Use of Armor All®, Son-of-a-Gun®or similar items is discouraged as these products make the liner slick.
CARGO LINER INSTALLATION INSTRUCTIONS FOR YOUR FORD
EXPEDITION & LINCOLN NAVIGATOR WITHOUT REAR AIR
THIS PART IS DESIGNED TO FIT TO THE BACK OF THE SECOND SEAT (WITH THIRD SEATS FOLDED
DOWN) OF 2004 AND NEWER FORD EXPEDITIONS AND LINCOLN NAVIGATORS WITHOUT REAR AIR. IF
YOU ARE INTERESTED IN A CARGO LINER THAT FITS TO THE BACK OF THE THIRD SEAT WHEN IT IS
FOLDED UP, YOU NEED HUSKY CARGO LINER #2355. SEE BACK OF SHEET FOR MORE INFORMATION.
IF THIS LINER IS TO WIDE, YOU LIKELY HAVE
REAR AIR AND NEED HUSKY LINER PART
#2356 WHICH ACCOMMODATES REAR AIR.

2358.doc
11/04/03
NOTE PANEL ON VEHICLES
EQUIPPED WITH REAR AIR. THIS
PANEL IS NOT FOUND ON THOSE
VEHICLES WITHOUT REAR AIR.