HUSKY LINERS 8141 Manual

8141 Installation Ins#C2940.doc
07/27/2006
THANK YOU FOR SELECTING A HUSKY FLOOR LINER
FROM WINFIELD CONSUMER PRODUCTS
CARE AND USE INSTRUCTIONS
Your new floor liner is custom molded to fit your particular vehicle. The liner is made to take the place of your
factory floor mats. For correct fit, it is necessary to remove the factory floor mat before installing your new floor
liner. However, do not remove the factory-installed carpeting.
Your liner is made from an engineering resin that is lightweight and extremely tough and durable. The easiest
way to clean your liner is with a damp cloth or sponge. If using a cleaner, 409®or Glass Plus®work well. Use of
Armor All®, Son-of-a-Gun®or similar items is discouraged as these products make the liner slick.
INSTALLATION INSTRUCTIONS FOR YOUR TAHOE
YUKON/DENALI/ESCALADE THIRD SEAT ACCESS LINER
PART #8141 IS DESIGNED FOR USE WITH ESCALADE/YUKON/DENALI AND TAHOE’S EQUIPPED WITH 2ND
ROW BUCKET SEATING. THIS LINER PROTECTS THE THIRD SEAT ACCESS AREA (WALKWAY BETWEEN
2ND ROW BUCKETS) THAT IS NOT COVERED BY THE SECOND SEAT HUSKY LINER (PART #6141). IF YOUR
VEHICLE IS EQUIPPED WITH A REAR BENCH SEAT, YOU DO NOT NEED THIS PART.
TO INSTALL LINER, FIRST FLIP BOTH 2ND ROW SEATS FORWARD. ONCE LINER IS INSTALLED, FLIP 2ND
ROW SEATS DOWN, MAKING SURE THEY ARE SECURELY LOCKED INTO POSITION. A PHOTO OF THE
INSTALLED PART IS ON THE BACK OF THIS PAGE.
REAR OF VEHICLE (CARGO AREA)

8141 Installation Ins#C2940.doc
07/27/2006