Hyundai 14BRJ-7 User manual

CONTENTS
SECTION 1 GENERAL
Group 1 Safety hints ---------------------------------------------------------------------------------------------------- 1-1
Group 2 Specifications ------------------------------------------------------------------------------------------------ 1-5
Group 3 Periodic replacement ------------------------------------------------------------------------------------- 1-16
SECTION 2 REMOVAL & INSTALLATION
Group 1 Structure -------------------------------------------------------------------------------------------------------- 2-1
Group 2 Removal and Installation of Unit ------------------------------------------------------------------- 2-2
SECTION 3 POWER TRAIN SYSTEM
Group 1 Structure and operation
--------------------------------------------------------------------------------- 3-1
Group 2 Troubleshooting --------------------------------------------------------------------------------------------- 3-4
Group 3 Disassembly and assembly -------------------------------------------------------------------------- 3-6
SECTION 4 BRAKE SYSTEM
Group 1 Structure and function ----------------------------------------------------------------------------------- 4-1
SECTION 5 STEERING SYSTEM
Group 1 Structure and function
----------------------------------------------------------------------------------- 5-1
SECTION 6 HYDRAULIC SYSTEM
Group 1 Structure and function ----------------------------------------------------------------------------------- 6-1
Group 2 Operational checks and troubleshooting ------------------------------------------------------- 6-20
Group 3 Disassembly and assembly --------------------------------------------------------------------------- 6-24
SECTION 7 ELECTRICAL SYSTEM
Group 1 Component location -------------------------------------------------------------------------------------- 7-1
Group 2 Electrical circuit ---------------------------------------------------------------------------------------------- 7-2
Group 3 Electric components -------------------------------------------------------------------------------------- 7-3
SECTION 8 MAST
Group 1 Structure -------------------------------------------------------------------------------------------------------- 8-1
Group 2 Operational checks and troubleshooting ------------------------------------------------------- 8-3
Group 3 Adjustment ----------------------------------------------------------------------------------------------------- 8-6
Group 4 Removal and installation -------------------------------------------------------------------------------- 8-9

0-1
FOREWORD
1. STRUCTURE
This service manual has been prepared as an aid to improve the quality of repairs by giving the
serviceman an accurate understanding of the product and by showing him the correct way to perform
repairs and make judgements. Make sure you understand the contents of this manual and use it to
full effect at every opportunity.
This service manual mainly contains the necessary technical information for operations performed in
a service workshop.
For ease of understanding, the manual is divided into the following sections.
SECTION 1 GENERAL
This section gives the general information of the machine and explains the safety hints for
maintenance.
SECTION 2 REMOVAL & INSTALLATION OF UNIT
This section explains the procedures and techniques of removal and installation of each component.
SECTION 3 POWER TRAIN SYSTEM
This section explains the structure of the transmission as well as control valve and drive axle.
SECTION 4 BRAKE SYSTEM
This section explains the brake piping, each component and operation.
SECTION 5 STEERING SYSTEM
This section explains the structure of the steering unit, priority valve, trail axle as well as steering
circuit and operation.
SECTION 6 HYDRAULIC SYSTEM
This section explains the structure of the gear pump, main control valve as well as work equipment
circuit, each component and operation.
SECTION 7 ELECTRICAL SYSTEM
This section explains the electrical circuit and each component.
It serves not only to give an understanding electrical system, but also serves as reference material for
troubleshooting.
SECTION 8 MAST
This section explains the structure of mast, carriage, backrest and forks.
The specifications contained in this service manual are subject to change at any time and without any
advance notice. Contact your HYUNDAI distributor for the latest information.

0-2
Revised edition mark(
①②③… )
When a manual is revised, an edition mark is
recorded on the bottom outside corner of the
pages.
R
Revisions
Revised pages are shown at the list of revised
pages on the between the contents page and
section 1 page.
Symbols
So that the shop manual can be of ample
practical use, important places for safety and
quality are marked with the following symbols.
2. HOW TO READ THE SERVICE MANUAL
Distribution and updating
Any additions, amendments or other changes will
be sent to HYUNDAI distributors.
Get the most up-to-date information before you
start any work.
Filing method
See the page number on the bottom of the
page.
File the pages in correct order.
Following examples shows how to read the
page number.
Example 1
2 - 3
Item number(2. Structure and
Function)
Consecutive page number for
each item.
Additional pages : Additional pages are
indicated by a hyphen(-) and number after the
page number. File as in the example.
1.
2.
3.
Symbol Item Remarks
Special safety precautions are
necessary when performing the
work.
Extra special safety precautions
are necessary when performing
the work because it is under
internal pressure.
Special technical precautions or
other precautions for preserving
standards are necessary when
performing the work.
Safety
Caution
※
10 - 4
10 - 4 - 1
10 - 4 - 2
10 - 5
Added pages

0-3
3. CONVERSION TABLE
Method of using the Conversion Table
The Conversion Table in this section is provided to enable simple conversion of figures. For details of
the method of using the Conversion Table, see the example given below.
Example
Method of using the Conversion Table to convert from millimeters to inches
Convert 55
mm
into inches.
Locate the number 50
in the vertical column at the left side, take this as ⓐ , then draw a
horizontal line from
ⓐ .
Locate the number 5
in the row across the top, take this as ⓑ , then draw a perpendicular line
down from
ⓑ .
Take the point where the two lines cross as
ⓒ . This point ⓒ gives the value when converting
from millimeters to inches. Therefore, 55
mm = 2.165 inches.
Convert 550
mm into inches.
The number 550 does not appear in the table, so divide by 10(Move the decimal point one place
to the left) to convert it to 55
mm .
Carry out the same procedure as above to convert 55mm to 2.165 inches.
The original value(550
mm ) was divided by 10, so multiply 2.165 inches by 10(Move the decimal
point one place to the right) to return to the original value.
This gives 550
mm = 21.65 inches.
1.
2.
(1)
(2)
(3)
(1)
(2)
(3)
Millimeters to inches 1
mm = 0.03937 in
ⓑ
ⓐ
01 2 345 678 9
0 0.039 0.079 0.118 0.157 0.197 0.236 0.276 0.315 0.354
10 0.394 0.433 0.472 0.512 0.551 0.591 0.630 0.669 0.709 0.748
20 0.787 0.827 0.866 0.906 0.945 0.984 1.024 1.063 1.102 1.142
30 1.181 1.220 1.260 1.299 1.339 1.378 1.417 1.457 1.496 1.536
40 1.575 1.614 1.654 1.693 1.732 1.772 1.811 1.850 1.890 1.929
50 1.969 2.008 2.047 2.087 2.126 2.165 2.205 2.244 2.283 2.323
60 2.362 2.402 2.441 2.480 2.520 2.559 2.598 2.638 2.677 2.717
70 2.756 2.795 2.835 2.874 2.913 2.953 2.992 3.032 3.071 3.110
80 3.150 3.189 3.228 3.268 3.307 3.346 3.386 3.425 3.465 3.504
90 3.543 3.583 3.622 3.661 3.701 3.740 3.780 3.819 3.858 3.898
ⓒ

0-4
Millimeters to inches 1
mm = 0.03937 in
01 2 345 678 9
0 0.039 0.079 0.118 0.157 0.197 0.236 0.276 0.315 0.354
10 0.394 0.433 0.472 0.512 0.551 0.591 0.630 0.669 0.709 0.748
20 0.787 0.827 0.866 0.906 0.945 0.984 1.024 1.063 1.102 1.142
30 1.181 1.220 1.260 1.299 1.339 1.378 1.417 1.457 1.496 1.536
40 1.575 1.614 1.654 1.693 1.732 1.772 1.811 1.850 1.890 1.929
50 1.969 2.008 2.047 2.087 2.126 2.165 2.205 2.244 2.283 2.323
60 2.362 2.402 2.441 2.480 2.520 2.559 2.598 2.638 2.677 2.717
70 2.756 2.795 2.835 2.874 2.913 2.953 2.992 3.032 3.071 3.110
80 3.150 3.189 3.228 3.268 3.307 3.346 3.386 3.425 3.465 3.504
90 3.543 3.583 3.622 3.661 3.701 3.740 3.780 3.819 3.858 3.898
Kilogram to Pound 1
kg = 2.2046 lb
01 2 345 678 9
0 2.20 4.41 6.61 8.82 11.02 13.23 15.43 17.64 19.84
10 22.05 24.25 26.46 28.66 30.86 33.07 35.27 37.48 39.68 41.89
20 44.09 46.30 48.50 50.71 51.91 55.12 57.32 59.5. 61.73 63.93
30 66.14 68.34 70.55 72.75 74.96 77.16 79.37 81.57 83.78 85.98
40 88.18 90.39 92.59 94.80 97.00 99.21 101.41 103.62 105.82 108.03
50 110.23 112.44 114.64 116.85 119.05 121.25 123.46 125.66 127.87 130.07
60 132.28 134.48 136.69 138.89 141.10 143.30 145.51 147.71 149.91 152.12
70 154.32 156.53 158.73 160.94 163.14 165.35 167.55 169.76 171.96 174.17
80 176.37 178.57 180.78 182.98 185.19 187.39 189.60 191.80 194.01 196.21
90 198.42 200.62 202.83 205.03 207.24 209.44 211.64 213.85 216.05 218.26

0-5
Liter to U.S. Gallon 1ℓ= 0.2642 U.S.Gal
01 2 345 678 9
0 0.264 0.528 0.793 1.057 1.321 1.585 1.849 2.113 2.378
10 2.642 2.906 3.170 3.434 3.698 3.963 4.227 4.491 4.755 5.019
20 5.283 5.548 5.812 6.6076 6.340 6.604 6.869 7.133 7.397 7.661
30 7.925 8.189 8.454 8.718 8.982 9.246 9.510 9.774 10.039 10.303
40 10.567 10.831 11.095 11.359 11.624 11.888 12.152 12.416 12.680 12.944
50 13.209 13.473 13.737 14.001 14.265 14.529 14.795 15.058 15.322 15.586
60 15.850 16.115 16.379 16.643 16.907 17.171 17.435 17.700 17.964 18.228
70 18.492 18.756 19.020 19.285 19.549 19.813 20.077 20.341 20.605 20.870
80 21.134 21.398 21.662 21.926 22.190 22.455 22.719 22.983 23.247 23.511
90 23.775 24.040 24.304 24.568 24.832 25.096 25.631 25.625 25.889 26.153
Liter to U.K. Gallon 1ℓ= 0.21997 U.K.Gal
01 2 345 678 9
0 0.220 0.440 0.660 0.880 1.100 1.320 1.540 1.760 1.980
10 2.200 2.420 2.640 2.860 3.080 3.300 3.520 3.740 3.950 4.179
20 4.399 4.619 4.839 5.059 5.279 5.499 5.719 5.939 6.159 6.379
30 6.599 6.819 7.039 7.259 7.479 7.969 7.919 8.139 8.359 8.579
40 8.799 9.019 9.239 9.459 9.679 9.899 10.119 10.339 10.559 10.778
50 10.998 11.281 11.438 11.658 11.878 12.098 12.318 12.528 12.758 12.978
60 13.198 13.418 13.638 13.858 14.078 14.298 14.518 14.738 14.958 15.178
70 15.398 15.618 15.838 16.058 16.278 16.498 16.718 16.938 17.158 17.378
80 17.598 17.818 18.037 18.257 18.477 18.697 18.917 19.137 19.357 19.577
90 19.797 20.017 20.237 20.457 20.677 20.897 21.117 21.337 21.557 21.777

0-6
kgf·m to lbf·ft
1
kgf·m = 7.233 lbf·ft
01 2 345 678 9
7.2 14.5 21.7 28.9 36.2 43.4 50.6 57.9 65.1
10 72.3 79.6 86.8 94.0 101.3 108.5 115.7 123.0 130.2 137.4
20 144.7 151.9 159.1 166.4 173.6 180.8 188.1 195.3 202.5 209.8
30 217.0 224.2 231.5 238.7 245.9 253.2 260.4 267.6 274.9 282.1
40 289.3 396.6 303.8 311.0 318.3 325.5 332.7 340.0 347.2 354.4
50 361.7 368.9 376.1 383.4 390.6 397.8 405.1 412.3 419.5 426.8
60 434.0 441.2 448.5 455.7 462.9 470.2 477.4 484.6 491.8 499.1
70 506.3 513.5 520.8 528.0 535.2 542.5 549.7 556.9 564.2 571.4
80 578.6 585.9 593.1 600.3 607.6 614.8 622.0 629.3 636.5 643.7
90 651.0 658.2 665.4 672.7 679.9 687.1 694.4 701.6 708.8 716.1
100 723.3 730.5 737.8 745.0 752.2 759.5 766.7 773.9 781.2 788.4
110 795.6 802.9 810.1 817.3 824.6 831.8 839.0 846.3 853.5 860.7
120 868.0 875.2 882.4 889.7 896.9 904.1 911.4 918.6 925.8 933.1
130 940.3 947.5 954.8 962.0 969.2 976.5 983.7 990.9 998.2 10005.4
140 1012.6 1019.9 1027.1 1034.3 1041.5 1048.8 1056.0 1063.2 1070.5 1077.7
150 1084.9 1092.2 1099.4 1106.6 1113.9 1121.1 1128.3 1135.6 1142.8 1150.0
160 1157.3 1164.5 1171.7 1179.0 1186.2 1193.4 1200.7 1207.9 1215.1 1222.4
170 1129.6 1236.8 1244.1 1251.3 1258.5 1265.8 1273.0 1280.1 1287.5 1294.7
180 1301.9 1309.2 1316.4 1323.6 1330.9 1338.1 1345.3 1352.6 1359.8 1367.0
190 1374.3 1381.5 1388.7 1396.0 1403.2 1410.4 1417.7 1424.9 1432.1 1439.4

0-7
kgf/cm2 to lbf/in2
1 kgf / cm2 = 14.2233 lbf / in
2
01 2 345 678 9
14.2 28.4 42.7 56.9 71.1 85.3 99.6 113.8 128.0
10 142.2 156.5 170.7 184.9 199.1 213.4 227.6 241.8 256.0 270.2
20 284.5 298.7 312.9 327.1 341.4 355.6 369.8 384.0 398.3 412.5
30 426.7 440.9 455.1 469.4 483.6 497.8 512.0 526.3 540.5 554.7
40 568.9 583.2 597.4 611.6 625.8 640.1 654.3 668.5 682.7 696.9
50 711.2 725.4 739.6 753.8 768.1 782.3 796.5 810.7 825.0 839.2
60 853.4 867.6 881.8 896.1 910.3 924.5 938.7 953.0 967.2 981.4
70 995.6 1010 1024 1038 1053 1067 1081 1095 1109 1124
80 1138 1152 1166 1181 1195 1209 1223 1237 1252 1266
90 1280 1294 1309 1323 1337 1351 1365 1380 1394 1408
100 1422 1437 1451 1465 1479 1493 1508 1522 1536 1550
110 1565 1579 1593 1607 1621 1636 1650 1664 1678 1693
120 1707 1721 1735 1749 1764 1778 1792 1806 1821 1835
130 1849 2863 1877 1892 1906 1920 1934 1949 1963 1977
140 1991 2005 2020 2034 2048 2062 2077 2091 2105 2119
150 2134 2148 2162 2176 2190 2205 2219 2233 2247 2262
160 2276 2290 2304 2318 2333 2347 2361 2375 2389 2404
170 2418 2432 2446 2460 2475 2489 2503 2518 2532 2546
180 2560 2574 2589 5603 2617 2631 2646 2660 2674 2688
200 2845 2859 2873 2887 2901 2916 2930 2944 2958 2973
210 2987 3001 3015 3030 3044 3058 3072 3086 3101 3115
220 3129 3143 3158 3172 3186 3200 3214 3229 3243 3257
230 3271 3286 3300 3314 3328 3343 3357 3371 3385 3399
240 3414 3428 3442 3456 3470 3485 3499 3513 3527 3542

TEMPERATURE
Fahrenheit-Centigrade Conversion.
A simple way to convert a fahrenheit temperature reading into a centigrade temperature reading or vice verse
is to enter the accompanying table in the center or boldface column of figures.
These figures refer to the temperature in either Fahrenheit or Centigrade degrees.
If it is desired to convert from Fahrenheit to Centigrade degrees, consider the center column as a table of
Fahrenheit temperatures and read the corresponding Centigrade temperature in the column at the left.
If it is desired to convert from Centigrade to Fahrenheit degrees, consider the center column as a table of
Centigrade values, and read the corresponding Fahrenheit temperature on the right.
0-8
。C。F。C。F。C。F。C。F
-40.4 -40 -40.0 -11.7 11 51.8 7.8 46 114.8 27.2 81 117.8
-37.2 -35 -31.0 -11.1 12 53.6 8.3 47 116.6 27.8 82 179.6
-34.4 -30 -22.0 -10.6 13 55.4 8.9 48 118.4 28.3 83 181.4
-31.7 -25 -13.0 -10.0 14 57.2 9.4 49 120.2 28.9 84 183.2
-28.9 -20 -4.0 -9.4 15 59.0 10.0 50 122.0 29.4 85 185.0
-28.3 -19 -2.2 -8.9 16 60.8 10.6 51 123.8 30.0 86 186.8
-27.8 -18 -0.4 -8.3 17 62.6 11.1 52 125.6 30.6 87 188.6
-27.2 -17 1.4 -7.8 18 64.4 11.7 53 127.4 31.1 88 190.4
-26.7 -16 3.2 -6.7 20 68.0 12.8 55 131.0 32.2 90 194.0
-26.1 -15 5.0 -6.7 20 68.0 12.8 55 131.0 32.2 90 194.0
-25.6 -14 6.8 -6.1 21 69.8 13.3 56 132.8 32.8 91 195.8
-25.0 -13 8.6 -5.6 22 71.6 13.9 57 134.6 33.3 92 197.6
-24.4 -12 10.4 -5.0 23 73.4 14.4 58 136.4 33.9 93 199.4
-23.9 -11 12.2 -4.4 24 75.2 15.0 59 138.2 34.4 94 201.2
-23.3 -10 14.0 -3.9 25 77.0 15.6 60 140.0 35.0 95 203.0
-22.8 -9 15.8 -3.3 26 78.8 16.1 61 141.8 35.6 96 204.8
-22.2 -8 17.6 -2.8 27 80.6 16.7 62 143.6 36.1 97 206.6
-21.7 -7 19.4 -2.2 28 82.4 17.2 63 145.4 36.7 98 208.4
-21.1 -6 21.2 -1.7 29 84.2 17.8 64 147.2 37.2 99 210.2
-20.6 -5 23.0 -1.1 35 95.0 21.1 70 158.0 51.7 125 257.0
-20.0 -4 24.8 -0.6 31 87.8 18.9 66 150.8 40.6 105 221.0
-19.4 -3 26.6 0 32 89.6 19.4 67 152.6 43.3 110 230.0
-18.9 -2 28.4 0.6 33 91.4 20.0 68 154.4 46.1 115 239.0
-18.3 -1 30.2 1.1 34 93.2 20.6 69 156.2 48.9 120 248.0
-17.8 0 32.0 1.7 35 95.0 21.1 70 158.0 51.7 125 257.0
-17.2 1 33.8 2.2 36 96.8 21.7 71 159.8 54.4 130 266.0
-16.7 2 35.6 2.8 37 98.6 22.2 72 161.6 57.2 135 275.0
-16.1 3 37.4 3.3 38 100.4 22.8 73 163.4 60.0 140 284.0
-15.6 4 39.2 3.9 39 102.2 23.3 74 165.2 62.7 145 293.0
-15.0 5 41.0 4.4 40 104.0 23.9 75 167.0 65.6 150 302.0
-14.4 6 42.8 5.0 41 105.8 24.4 76 168.8 68.3 155 311.0
-13.9 7 44.6 5.6 42 107.6 25.0 77 170.6 71.1 160 320.0
-13.3 8 46.4 6.1 43 109.4 25.6 78 172.4 73.9 165 329.0
-12.8 9 48.2 6.7 44 111.2 26.1 79 174.2 76.7 170 338.0
-12.2 10 50.0 7.2 45 113.0 26.7 80 176.0 79.4 172 347.0

SECTION 1 GENERAL
Group 1 Safety hints ----------------------------------------------------------------------------------------------------- 1-1
Group 2 Specifications ------------------------------------------------------------------------------------------------- 1-5
Group 3 Periodic replacement ------------------------------------------------------------------------------------- 1-16

1-1
Careless performing of the easy work may
cause injuries.
Take care to always perform work safely, at least
observing the following.
Oil is a dangerous substance. Never handle
oil, grease or oily clothes in places where
there is any fire of flame.
As preparation in case of fire, always know the
location and directions for use of fire extinguishers
and other fire fighting equipment.
··
Wear well-fitting helmet, safety shoes and
working clothes. When drilling, grinding or
hammering, always wear protective goggles.
Always do up safety clothes properly so that
they do not catch on protruding parts of
machines. Do not wear oily clothes.
When checking, always release battery plug.
··
Flames should never be used instead of
lamps. Never use a naked flame to check
leaks or the level of oil or electrolyte.
·
D50ASF01
D50ASF02
D50ASF03
GROUP 1 SAFETY HINTS
When working on top of the machine, be
careful not to lose your balance and fall.
·
D50ASF06

1-2
Hand a caution sign in the operator's compartment
(For example Do not start or Maintenance in
progress).
This will prevent anyone from starting or
moving the machine by mistake.
·
When inspecting running parts or near such
parts, always stop the machine first.
Before checking or servicing accumulator or
piping, depress brake pedal repeatedly to
release pressure.
Park the machine on firm, flat ground.
Lower the fork to the ground and stop the
engine.
Return each lever to NEUTRAL and apply
the brake lock.
·
D50ASF07
D50ASF08
Immediately remove any oil or grease on the
floor of the operator's compartment, or on the
handrail. It is very dangerous if someone
slips while on the machine.
·
OIL
When working with others, choose a group
leader and work according to his instructions.
Do not perform any maintenance beyond the
agreed work.
·
D50ASF09
D50ASF10

1-3
Unless you have special instructions to the
contrary, maintenance should always be
carried out with the machine stopped. If
maintenance is carried out with the machine
running, there must be two men present : one
sitting in the operator's seat and the other one
performing the maintenance. In such a case,
never touch any moving part.
·
Always remember that the hydraulic oil circuit
is under pressure. When feeding or draining
the oil or carrying out inspection and
maintenance, release the pressure first.
·
D50ASF11

1-4
Thoroughly clean the machine. In particular, be careful to clean the filler caps, grease fittings and the
area around the dipsticks. Be
careful not to let any dirt or dust into the system.
Always use HYUNDAI Forklift genuine parts for replacement.
Always use the grades of grease and oil recommended by HYUNDAI Forklift.
Choose the viscosity specified for the ambient temperature.
Always use pure oil or grease, and be sure to use clean containers.
When checking or changing the oil, do it in a place free of dust, and prevent any dirt from getting into
the oil.
Before draining the oil, warm it up to a temperature of 30 to 40。C.
After replacing oil, filter element or strainer, bleed the air from circuit.
When the strainer is located in the oil filler, the strainer must not be removed while adding oil.
When changing the oil filter, check the drained oil and filter for any signs of excessive metal particles
or other foreign materials.
When removing parts containing O-ring, gaskets or seals, clean the mounting surface and replace
with new sealing parts.
After injecting grease, always wipe off the oil grease that was forced out.
Do not handle electrical equipment while wearing wet places, as this can cause electric shock.
During maintenance do not allow any unauthorized person to stand near the machine.
Be sure you fully understand the contents of the operation. It is important to prepare necessary tools
and parts and to keep the operating area clean.
When checking an open gear case there is a risk of dropping things in. Before removing the covers to
inspect such cases, empty everything from your pockets. Be particularly careful to remove wrenches
and nuts.
Way to use dipstick
Push the dipstick fully into the guide, and then pull out.
Carrying out other difficult maintenance work carelessly can cause unexpected accidents. If you
consider the maintenance is too difficult, always request the HYUNDAI Forklift distributor to carry out
it.
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·

1-5
GROUP 2 SPECIFICATIONS
1. GENERAL LOCATIONS
1 Mast
2 Lift cylinder
3 Carriage and backrest
4Forks
5 Drive unit
6 Dash board
7 Frame
8 EPS motor
9 Drive motor
10 Drive wheel
11 Load wheel & brake
12 Accelerator pedal
13 Brake pedal
14 Overhead guard
15 Pump motor
16 Steering wheel
17 Start key
18 Battery trolley
19 Seat
20 Hood
21 Pedal switch
22 Free lift cylinder
1
2
3
4
14
11
15
18
6
17
16
7
12
13
21
19
20
8
9
5
10
MP
22
BRJ7RE01

1-6
2. SPECIFICATIONS
14/16BRJ-7 1)
A
B
L,W,T
C/C’
D
E
F
kg
mm
kg
mm
mm
mm/sec
mm/sec
mm
degree
mm
mm
km/h
degree
mm
Overall length
Overall width
Overhead guard height
Ground clearance(Mast)
Wheel base
Wheel tread rear(Load)
mm
mm
mm
mm
mm
mm
2192
1270
2120
105
1410
1149
ą
ą
ą
ą
1460
ą
Capacity
Load center
Weight
Model Unit 14BRJ-7 16BRJ-7
Lifting height
Free lift(Without backrest)
Lifting speed(Unload/load)
Lowering speed(Unload/load)
LÝWÝT
Tilt angle forward/backward
Max height
Min height
Travel speed(Unload)
Gradeability(Load)
Min turning radius(Outside)
1400
600
2946
5306
1724
580/370
450/500
1200
Ý 100 Ý 40
2/5
5812
2362
14
13
1625
1600
ą
3048
ą
ą
ą
ą
1200 Ý 100 Ý 40
ą
ą
ą
ą
13
1675
Fork
Mast
Performance
H
F
M
A
D
B
O
R
CC'
K
L
G
J
I
E
W
G
H
I
J
K
M
ETC
Max hydraulic pressure
Hydraulic oil tank(@ TF 530)
190
25
ą
ą
kgf/cm2
˶
14BRJ7SP01
R

1-7
20/25BRJ-7 2)
A
B
L,W,T
C/C’
D
E
F
kg
mm
kg
mm
mm
mm/sec
mm/sec
mm
degree
mm
mm
km/h
degree
mm
Overall length
Overall width
Overhead guard height
Ground clearance(Mast)
Wheel base
Wheel tread rear(Load)
mm
mm
mm
mm
mm
mm
2445
1270
2120
123
1520
1155
ą
ą
ą
ą
1670
1184
Capacity
Load center
Weight
Model Unit 20BRJ-7 25BRJ-7
Lifting height
Free lift(Without backrest)
Lifting speed(Unload/load)
Lowering speed(Unload/load)
LÝWÝT
Tilt angle forward/backward
Max height
Min height
Travel speed(Unload)
Gradeability(Load)
Min turning radius(Outside)
2000
600
3515
5305
1709
580/370
450/500
1200
Ý 100 Ý 45
2/5
5996
2400
14
12
1735
2500
ą
3711
ą
ą
ą
ą
1200 Ý 125 Ý 45
ą
ą
ą
ą
11
1885
Fork
Mast
Performance
H
F
M
A
D
B
O
R
CC'
K
L
G
J
I
E
W
G
H
I
J
K
M
ETC
Max hydraulic pressure
Hydraulic oil tank(@ TF 530)
190
25
ą
ą
kgf/cm2
˶
14BRJ7SP01
R

1-8
3. SPECIFICATION FOR MAJOR COMPONENTS
14/16BRJ-7
CONTROLLER
1)
(1)
BATTERY (3)
Item
Rated voltage
Dimension(W × L × H)(OPT)
Min. Battery weight(OPT)
Max. Battery weight(OPT)
Connector(CE spec)
V
mm
kg
kg
-
←
Unit
CCHARGER (4)
48
1223
× 283(353) × 787
710(890)
790(990)
SBE 320
Item
Type
Battery capacity for charge
-
V-AH
←
Unit 16BRJ-7
48V / 280~335AH
14BRJ-7
Triple phase 410
Single phase 220
Triple phase 220/380
Triple phase 440
Constant current, constant voltage
←
←
(SBE 320)
62 ± 1
8±2
(SBE 320)
AC input V
DC output
Charge time
Connector(CE spec)
V
hr
-
Item
Model
Type
Dimension
Current limit
Communication
-
-
mm
A
-
Unit EPS motor controller
Drive&Pump motor controller
AC-2 EPS-AC0
MOSFET
←
200 × 250 × 147.5 180 × 144 × 64.8
450A
CAN
45A
←
MMOTOR (2)
16BRJ-714BRJ-7
←
←
←
Fingertip controller
Mhyrio CB
←
197 × 82 × 73
-
←
Item
Model
Type
Rated voltage
Output
Insulation
-
-
Vac
kW
-
Unit Pump
Traction
TSA 200-160-104 TSA 170-210-009
AC AC
30 30
6.8
Class F
15.8
Class F
EPS
G104087A
AC
23
0.4
Class H

1-9
GEAR PUMP (5)
Item
Type
Displacement
Maximum operating pressure
Rated speed(max/min)
-
cc/rev
bar
rpm
Fixed displacement gear pump
19.6
210
3000/500
Unit Specification
MMAIN CONTROL VALVE (6)
Item
Type
Operating method
Main relief valve pressure
-
-
bar
3 spool, 4 spool
Proportional
190
Unit Specification
DDRIVE UNIT
(7)
WHEELS
(8)
Item
Type(Load/drive)
Quantity(Load/drive)
Load wheel
Drive wheel
Polyurethane
2 / 1
Ø 285 × 100
Ø 305 × 140
Specification
BBRAKES
(9)
Item
Brakes(Service & Parking) Service : Load wheels, electromagnetic brake
Parking : Drive wheel, electromagnetic brake
Specification
Item
-
ℓ
14.5
2.2
Unit Specification
Gear ratio
Oil Quantity
Total

1-10
20/25BRJ-7
CONTROLLER
2)
(1)
BATTERY (3)
Item
Rated voltage
Dimension(W × L × H)(OPT)
Min. Battery weight(OPT)
Max. Battery weight(OPT)
Connector(CE spec)
V
mm
kg
kg
-
←
Unit
CCHARGER (4)
48
1223
× 353(425) × 787
890(1065)
990(1180)
SBE 320
Item
Type
Battery capacity for charge
-
V-AH
←
Unit 25BRJ-7
48V / 450~520AH
20BRJ-7
Triple phase 410
Single phase 220
Triple phase 220/380
Triple phase 440
Constant current, constant voltage
←
←
(SBE 320)
62 ± 1
8±2
(SBE 320)
AC input V
DC output
Charge time
Connector(CE spec)
V
hr
-
MMOTOR (2)
25BRJ-720BRJ-7
←
←
←
Item
Model
Type
Dimension
Current limit
Communication
-
-
mm
A
-
Unit EPS motor controller
Drive&Pump motor controller
AC-2 EPS-AC0
MOSFET
←
200 × 250 × 147.5 180 × 144 × 64.8
450A
CAN
45A
←
Fingertip controller
Mhyrio CB
←
197 × 82 × 73
-
←
Item
Model
Type
Rated voltage
Output
Insulation
-
-
Vac
kW
-
Unit Pump
Traction
TSA 200-160-104 TSA 170-210-009
AC AC
30 30
6.8
Class F
15.8
Class F
EPS
G104087A
AC
23
0.4
Class H