I-care ic200 User manual

INSTRUCTION MANUAL
ENGLISH

ENGLISHIcare ic200 tonometer manual
www.icaretonometer.com
2
TONOMETER
Icare® ic200
INSTRUCTION MANUAL TA031-046 EN 2.7
The information in this document is subject to change without prior notice. Should a conflict situation arise concerning a translated document, the English-
language version shall prevail.
Icare Finland Oy/Tiolat Oy
Äyritie 22, FI-01510 Vantaa, Finland
Tel. [phone], Fax [phone]
www.icaretonometer.com, [e-mail]
TABLE OF CONTENTS
SAFETY INSTRUCTIONS ..............................................................................................................................................................................................................3
INTENDED USE............................................................................................................................................................................................................................5
INTRODUCTION ..........................................................................................................................................................................................................................5
PACKAGE CONTENTS.................................................................................................................................................................................................................. 5
FEATURES AND PARTS OF THE TONOMETER ...........................................................................................................................................................................5
TAKING THE DEVICE INTO USE ..................................................................................................................................................................................................6
INSTALLING THE WRIST STRAP ......................................................................................................................................................................................6
INSTALLING THE BATTERIES FOR THE FIRST TIME........................................................................................................................................................6
TURNING THE TONOMETER ON.....................................................................................................................................................................................7
LOADING THE PROBE ................................................................................................................................................................................................................7
PROBE BASE INDICATOR LIGHT ................................................................................................................................................................................................7
MEASUREMENT.......................................................................................................................................................................................................................... 8
USER INTERFACE FUNCTIONS .................................................................................................................................................................................................11
BLUETOOTH ..............................................................................................................................................................................................................................12
PRINTER .........................................................................................................................................................................................................................12
EXPORT...........................................................................................................................................................................................................................13
ERROR AND INFO MESSAGES .................................................................................................................................................................................................14
MEASUREMENT FLOW CHART ................................................................................................................................................................................................15
ACCESSORIES ............................................................................................................................................................................................................................16
TECHNICAL INFORMATION...................................................................................................................................................................................................... 16
IT-NETWORK SPECIFICATIONS .....................................................................................................................................................................................16
PERFORMANCE DATA ............................................................................................................................................................................................................... 17
MAINTENANCE .........................................................................................................................................................................................................................17
REPLACING THE PROBE BASE..................................................................................................................................................................................................17
CLEANING THE TONOMETER...................................................................................................................................................................................................17
RETURNING THE ICARE TONOMETER FOR SERVICING OR REPAIR ......................................................................................................................................18
PERIODIC SAFETY CHECKS ....................................................................................................................................................................................................... 18
SYMBOLS ...................................................................................................................................................................................................................................18
INFORMATION TO THE USER REGARDING THE RADIO COMMUNICATION PART OF THE DEVICE ....................................................................................19
ELECTROMAGNETIC DECLARATION........................................................................................................................................................................................20
This device complies with:
Medical Device Directive 93/42/EEC
Canadian Medical Device Regulations
RoHS Directive 2011/65/EU
Radio equipment directive 2014/53/EU.
Copyright © 2018 Icare Finland Oy. All rights reserved. Icare is a registered trademark of Icare Finland Oy, all other trademarks are the property of their
respective owners. Made in Finland.
0598

ENGLISH
Icare ic200 tonometer manual
www.icaretonometer.com
3
SAFETY INSTRUCTIONS
WARNING
The tonometer device must not come into contact with the patient’s eyes. When adjusting the forehead resting support for the tonometer, do not accidentally
push the tonometer or probe into the eye. The tonometer’s forehead spacing support needs to be adjusted to maintain the tip of the probe about 5 mm, or
about 3/16 inch, from the eye. During measurement, only the probe makes contact with eye, for a fraction of a second.
WARNING
The tonometer should only be opened by qualified service personnel. It contains no user-serviceable parts, apart from the batteries and a probe base. The Icare
tonometer requires no routine servicing or calibration other than changing the batteries at least every 12 months and changing the probe base. If there is reason
to believe servicing of the device is necessary, contact qualified service personnel or your local Icare representative.
WARNING
Changes or modifications not expressly approved by Icare Finland Oy could void the user’s authority to operate the equipment.
WARNING
Never immerse the Icare tonometer in liquid. Do not spray, pour or spill liquid onto the Icare tonometer, its accessories, connectors, switches or openings in the
chassis. Remove any liquid appearing on the surface of the tonometer immediately.
WARNING
Use of this equipment adjacent to, or stacked with, other equipment may result in improper operation and should be avoided. If such use is necessary, this
equipment, and the other equipment, should be observed to verify that they are operating normally.
WARNING
Use of accessories other than those specified or provided by the manufacturer of this equipment could result in increased electromagnetic emissions or
decreased electromagnetic immunity of this equipment and result in improper operation.
WARNING
Use only the original, certified probes supplied by the manufacturer. The probes are for single-use (one per measurement session) only. Each testing session is
defined by one successful measurement in both eyes, but in case either eye is inflamed or infected the healthy eye should be measured first. Use probes taken
only from the intact, original packaging. Re-use of a probe could result in incorrect measurement values, damage to the probe, cross-contamination by bacteria
or viruses or infection of the eye. Re-use of probes voids all responsibilities and liabilities of the manufacturer concerning the safety and effectiveness of the
tonometer.
WARNING
Federal law (U.S.) restricts this device to sale by or on the order of a physician.
WARNING
To prevent contamination, keep unused probes in their box, do not touch the bare probe, do not use a probe if it touches a non-sterile surface like a table or a
floor. Do not use the touched or dropped probe, dispose of it properly (e.g. in containers for disposable needles).
WARNING
Connection of the ic200 tonometer to IT networks including other equipment could result in previously unidentified risks to patients, operators, or third parties.
WARNING
The responsible organization should identify, analyze, evaluate, and control any additional risks resulting from the ic200 tonometer connected to IT networks
including other equipment.
PRECAUTION
Read this manual carefully, since it contains important information on using and servicing the tonometer.
Do not use any anesthetic to numb the eye, an anesthetic can affect the measurement results. No anesthetic is required when performing measurements with
this device.
If the tonometer is not used for 3 minutes, it will automatically switch itself off (the probe may then fall out).
After removing the device from its packaging, visually inspect the tonometer for any external damage, particularly for possible damage to the device casing.
If you suspect damage to the tonometer, contact the manufacturer or distributor.
Use the tonometer only for measuring intraocular pressure, any other use is improper. The manufacturer cannot be held liable for any damage arising from
improper use of the tonometer, or any consequences thereof.
Never open the casing of the tonometer, except for battery replacement or changing the probe base. This manual contains instructions for replacing batteries
and changing the probe base.

ENGLISHIcare ic200 tonometer manual
www.icaretonometer.com
4
Keep the tonometer out of reach of children. The probe base, battery compartment cover, screws, collar and probes are small objects and may be accidentally
swallowed.
Do not use the device if it appears to be damaged or malfunctioning. The device must be delivered to service for repair.
Do not use the device near inflammable substances, including inflammable anesthetic agents.
Prior to each new patient to be measured, check that a new disposable probe from an intact package is being used. After inserting the probe in the probe base,
visually inspect the probe to ensure that the small plastic round tip is visible at the front. Do not use a probe without the plastic tip.
The tonometer conforms to EMC requirements (IEC 60101-1-2), performance of the tonometer may be affected if it is used near to (<1 m) another electrical
device, such as a cellular phone, emitting high-intensity electromagnetic radiation. The tonometer’s own electromagnetic emissions are well below the maximum
levels permitted by the relevant standards. Nevertheless, the tonometer may cause interference in the operation of highly sensitive devices in the immediate
vicinity.
If the device is not intended to be used for a long period of time, it is recommended to remove the batteries from the battery compartment. Removing the
batteries will not affect the subsequent functioning of the tonometer.
Used probes cannot be recycled. Dispose of used probes properly (e.g. in containers for disposable needles or in a bin for metal waste).
Batteries, packaging materials and probe bases must be disposed of according to local regulations.
To avoid dropping of the device and to ensure the safe handling of the device, always use the wrist strap to keep the device attached
to the wrist when in use.
Use only the types of battery specified in the Technical Information section of this instruction manual.
The measurement method of the Icare ic200 tonometer is based on magnetic induction and therefore an external magnetic field in line with the probe may
prevent the measurement. In such case the tonometer will continuously ask to repeat the measurement. Situation can be solved either by removing the source
of interference from the vicinity of the device or by performing the measurement in different location with no such interference.
Changes to the IT network could introduce new risks requiring additional analysis by the responsible organization. The changes include:
• changes in the IT-network configuration
• connection of additional items to the IT-network
• disconnecting items from the IT-network
• update or upgrade of equipment connected to the IT-network

ENGLISH
Icare ic200 tonometer manual
www.icaretonometer.com
5
INTENDED USE
The Icare ic200 tonometer is intended to be used for the measurement of intraocular pressure of the human eye.
The Icare ic200 tonometer is intended to be used by healthcare professionals in a professional healthcare environment. No special skills or
training are needed to use the device.
INTRODUCTION
The Icare ic200 tonometer is based on a patented, induction-based rebound method, which allows intraocular pressure (IOP) to be measured accurately, rapidly
and without an anesthetic.
The Icare ic200 tonometer allows for a patient’s IOP to be measured for patients in the supine position as well as in upright (sitting or standing) positions.
With the Icare rebound measurement method, a miniature, light-weight probe is launched in a direction perpendicular to the surface of the center of the cornea
of the eye. The probe is composed of a medical grade plastic tip and a metal shaft. The metal shaft is magnetized prior to measurement. During a measurement,
the probe can be considered to act like a moving magnet that induces an electric signal in the surrounding coil allowing for highly accurate measurement of the
probe’s motion. After launching, the probe briefly makes contact with the cornea and bounces back. The tonometer records multiple parameters covering the
motion of the probe, including deceleration and rebound time. Using a proprietary algorithm, the device is able to calculate the eye’s IOP.
A displayed IOP reading is derived from the results from a sequence of six individual IOP measurements and calculations, made each of the six times the probe
hits the cornea and rebounds. The displayed IOP measurement is also stored in the tonometer’s memory for later retrieval.
The Icare ic200 tonometer incorporates a Bluetooth® module which allows wireless connectivity to Bluetooth-supported printers or for data transfer.
No part of the tonometer or probes contain natural rubber latex.
PACKAGE CONTENTS
PRECAUTION
When removing the device from its packaging, visually inspect the tonometer for any external damage, particularly for possible damage to the device casing.
If you suspect damage to the tonometer, contact the manufacturer or distributor of the device.
The Icare ic200 package contains:
• Icare ic200 tonometer
• 4 x AA 1.5 V batteries
• Box of 100 probes
• wrist strap
• silicone grip
• IOP pad for writing down results
• aluminum case
• screwdriver
• probe base cover
• spare probe base
• printed quick guide
• USB drive including instruction manuals
• printed instruction manuals (EU only)
• warranty card
FEATURES AND PARTS OF THE TONOMETER
1. Forehead support
2. Probe base
3. Locking collar
4. Display screen
5. Adjustment wheel for forehead
support
6. User interface Navigation buttons
7. Select button
8. Measure button
1.
2.
3.
4.
6.
7.
8.
5.

ENGLISHIcare ic200 tonometer manual
www.icaretonometer.com
6
TAKING THE DEVICE INTO USE
Before using the Icare ic200 tonometer for the first time, attach the wrist strap and insert the batteries.
INSTALLING THE WRIST STRAP
Thread the string loop at the end of the wrist strap through the two holes at the bottom of the device (see figure below). Take hold of the end of the wrist strap,
turn it back and bring it through the loop. Finally, pull the wrist strap to tighten the loop.
PRECAUTION
To avoid dropping the device and to ensure the safe handling of the device, always keep the tonometer attached to the wrist using the wrist strap when
operating the device.
INSTALLING THE BATTERIES FOR THE FIRST TIME
Unscrew the battery compartment locking screw with the screwdriver supplied. Remove the battery compartment cover. Insert a new set of four AA 1.5 V
batteries (LR6). Insert the batteries according to the figure below. Take care to observe correct polarity.
Replace the battery compartment cover. Secure the cover in place by tightening the locking screw. Take care not to use excessive force (torque) when tightening
the screw.
For a maximum grip in hand and traction on a slippery surface you may now install the silicone grip. Put it first over the end of the device and then slide it with a
firm grip all the way (rolling and finally unrolling the end of the silicone grip may help). Uninstall the silicone grip in reverse order.
PRECAUTION
Use only the battery type which is specified in technical specification section of this instruction manual.
1.
2.
3.
4.

ENGLISH
Icare ic200 tonometer manual
www.icaretonometer.com
7
TURNING THE TONOMETER ON
The tonometer can be activated in one of two ways. Either press the Select or the Measure button once. The following figure sequences illustrate the two
alternative ways of starting the tonometer:
After pressing the Select button
After pressing the Measure button
The device displays the time and date during the start-up sequence. If either the time and/or date are incorrect, set the correct time and/or date as instructed in
the User Interface Functions section of this instruction manual.
PATIENT ID
You may choose to assign an ID number to any measurement. The ID may help to verify afterwards which measurement belongs to which patient in the device’s
measurement History. Press the Select button to get to the Measure view from the Load view unless you were already in the Measure view. Press the right
Navigation button two times to get to the Patient ID view, press the Select button again and select a number by the Navigation buttons. Press the Select button
to get back, press the left Navigation button two times to get to the Measure view and finally press the Select button to get to the Load view.
LOADING THE PROBE
Remove the yellow protective cover from the probe base by pulling (not by turning as turning may
unscrew the locking collar). Retain the probe base cover (do not discard). The probes are supplied
in protective probe tubes. Take a new probe tube and hold the tube with its cap upright. Remove
the protective cap. Insert the probe into the tonometer’s probe base by carefully turning the probe
tube upside-down, allowing the probe to slide into the probe base (see figure). The tonometer will
magnetize the probe and hold it in the probe base.
A probe can be loaded into the Icare ic200 tonometer even if the device has not yet been turned
on. In this case, the tonometer recognizes that a probe has been inserted when entering the
measurement sequence and automatically displays the eye side selection menu.
WARNING
To prevent contamination, do not touch the bare probe, do not use a probe if it touches a non-sterile
surface like a table or a floor. Do not use the touched or dropped probe, dispose of it properly (e.g.
in containers for disposable needles).
PROBE BASE INDICATOR LIGHT
The probe base indicator can emit either red or green light when the tonometer is on. The probe
base indicator light serves two purposes: Firstly, the indicator helps guide alignment of the
tonometer and probe device by emitting a red light – if the device is too tilted to far up – or a green
light when the orientation of the device is acceptable.
Secondly, the indicator light color changing to red can communicate an error situation during the
measurement sequence, in addition to messages shown on the device’s display screen (see section:
Error and Info Messages).
LIGHTLIGHT
ME21
RECEIPT
OFF
TOO FAR
REPEAT
TOO NEAR
CHANGE
CHANGE
calibration
Sensor
CHANGE
CHANGE
14.0
14.1 14.2
14.4 14.6
14.3
14.5
14.7 14.9
14.8
14.10 14.11
REPEAT
LOAD LOAD
mmHg
mmHg
mmHg
mmHg
mmHg
mmHg
14: ERRORs & ALERTs
14.13
1.0
1.9
1.10
1.11
1.12
1.13
1.15
12.0
12.2 13.0
13.1
13.2
13.5
13.1
13.6
13.7
13.8
13.9
13.3
13.3
13.412.3
12.4
12.6
12.7
12.8
12.9
12.10
12.4
12.6
12.8
12.8
12.5
12.5
12.1
IF PRINTER
CONNECTED
1.14
1.16
2.1
2.2
2.3
2.0
0.1
0.2
0.3
Document name: GUI Flowchart TA031
Document number: TA031-GUI
Revision: 04
Date: 11.14.2017
Author: Tomi Lonka (Desigence)
1.17 1.18
SERVICE
14.12
MEASURE
1.8
1.7
PATIENT IDHISTORY INFO
ID 1mmHg
5.2
5.3
5.4
5.5
5.0
BLUETOOTH
740A
4.3
4.4
4.6
4.1
BLUETOOTH
OFF
4.2
BLUETOOTH
EXPORT
4.0
3.1
3.0
3.2
3.3
9.0
DATE
16.03.2017
TIME
17:15
10.0 11.0
10.1
10.2
10.3
8.0
8.1
8.3
8.4
LANGUAGE
ENGLISH
8.2
17.6
23.9
20.8
16.5
17.6
17.4
23.8
1.1 1.2
1.4 1.51.3
EYE EYE
OFF
PATIENT ID BLUETOOTH
BLUETOOTH
RETURN
2.4
BACK
ID 1
PATIENT ID
ID02
PATIENT ID
5.1
6.2
6.3
6.4
6.5
6.0
LIGHT
6.1
LIGHT
LIGHT
LIGHT
7.1
7.2
7.3
7.4
BRIGHTNESS
7.0
BRIGHTNESS
BRIGHTNESS
BRIGHTNESS
LANGUAGE
KIELI
SPRÅK
SPRACHE
BRIGHTNESS
EN
FI
SV
DE
9.1
9.3
9.4
9.2
FORMAT
YEAR
MONTH
DAY
DMY
2017
03
16
11.1
FORMAT
HOURS
MINUTES
24 H
SW
17
15
2.5
RETURN
17.2 17.817.4
---- ----18.2
PRINT
PRINTING...
ID 9
mmHg
ME21
RECEIPT
IF PRINTER
CONNECTED
PRINT
PRINTING...
12: PRINTER MENU
13: PC/ MOBILE MENU
13: PC/ MOBILE MENU
NEW
PAIR
FOUND 1
SEARCHING...
NOT FOUND
PRINTER
ME21
PAIR
ME21
PAIR
ME21
TEST
ME21
UNPAIR BACK
BACK
ME21
PAIRED
TEST
PRINTING...
REMOVED
CONNECTION
12: PRINTER MENU
If Printer is not found If PC/ Mobile Device
is not found
If Printer is connected If connection to PC/ Mobile device already exists
mmHg
17.4
ID 9
1/100
OD OS
OD
18/09/2017
07:37:45 AM
mmHg 12.6
OS
18/09/2017
07:37:45 AM
18/09/2017
07:37:45 AM
2/100 TO MENU
ME21
4.5
TO MENU
ENGLISH
SOUMI
SVENSKA
DEUTSCH
1733RM001
1.00 A
SN
1733RM001
hh:mm
17:mm
17:15
DD.MM.YYYY
DD.MM.2017
DD.03.2017
16.03.2017
ERROR
PRINTER
ERROR
CONNECTION
RESTORED
CONNECTION
ME21
PAIRED
TEST
PRINTING...
PAIR
NEW
PAIR
740A
TEST
740A
UNPAIR
740A
WAITING...
DEVICE
WAITING...
DEVICE
PAIRED
740A
TBD
CONNECTION
CANCELLED
PAIRING
CANCELLED
012345
740A
PAIRED
740A
BLUETOOTH
Icare EXPORT
OD OS
1.6
EYE
OD OS
OD
OD
OD
OD
OD
OD
EYE
OD OS
ID 9 ID 9
ID 9 ID 9
ID 9
ID 9
ID 9
ID 9
ID 9
ID 9
2/100
3/100
SOUND
SOUND
SOUND
SOUND
SOUNDSOUND
16:36:10
16/03/2017
EYE
OD OS
EYE
OS
OD
mmHg
16.6
OD
mmHg
mmHg 17.4
16.5
mmHg
16.5
ID 9
OD
LIGHTLIGHT
ME21
RECEIPT
OFF
TOO FAR
REPEAT
TOO NEAR
CHANGE
CHANGE
calibration
Sensor
CHANGE
CHANGE
14.0
14.1 14.2
14.4 14.6
14.3
14.5
14.7 14.9
14.8
14.10 14.11
REPEAT
LOAD
LOAD
mmHg
mmHg
mmHg
mmHg
mmHg
mmHg
14: ERRORs & ALERTs
14.13
1.0
1.9
1.10
1.11
1.12
1.13
1.15
12.0
12.2 13.0
13.1
13.2
13.5
13.1
13.6
13.7
13.8
13.9
13.3
13.3
13.412.3
12.4
12.6
12.7
12.8
12.9
12.10
12.4
12.6
12.8
12.8
12.5
12.5
12.1
IF PRINTER
CONNECTED
1.14
1.16
2.1
2.2
2.3
2.0
0.1
0.2
0.3
Document name: GUI Flowchart TA031
Document number: TA031-GUI
Revision: 04
Date: 11.14.2017
Author: Tomi Lonka (Desigence)
1.17 1.18
SERVICE
14.12
MEASURE
1.8
1.7
PATIENT IDHISTORY INFO
ID 1mmHg
5.2
5.3
5.4
5.5
5.0
BLUETOOTH
740A
4.3
4.4
4.6
4.1
BLUETOOTH
OFF
4.2
BLUETOOTH
EXPORT
4.0
3.1
3.0
3.2
3.3
9.0
DATE
16.03.2017
TIME
17:15
10.0 11.0
10.1
10.2
10.3
8.0
8.1
8.3
8.4
LANGUAGE
ENGLISH
8.2
17.6
23.9
20.8
16.5
17.6
17.4
23.8
1.1 1.2
1.4 1.51.3
EYE EYE
OFF
PATIENT ID BLUETOOTH
BLUETOOTH
RETURN
2.4
BACK
ID 1
PATIENT ID
ID02
PATIENT ID
5.1
6.2
6.3
6.4
6.5
6.0
LIGHT
6.1
LIGHT
LIGHT
LIGHT
7.1
7.2
7.3
7.4
BRIGHTNESS
7.0
BRIGHTNESS
BRIGHTNESS
BRIGHTNESS
LANGUAGE
KIELI
SPRÅK
SPRACHE
BRIGHTNESS
EN
FI
SV
DE
9.1
9.3
9.4
9.2
FORMAT
YEAR
MONTH
DAY
DMY
2017
03
16
11.1
FORMAT
HOURS
MINUTES
24 H
SW
17
15
2.5
RETURN
17.2 17.817.4
---- ----18.2
PRINT
PRINTING...
ID 9
mmHg
ME21
RECEIPT
IF PRINTER
CONNECTED
PRINT
PRINTING...
12: PRINTER MENU
13: PC/ MOBILE MENU
13: PC/ MOBILE MENU
NEW
PAIR
FOUND 1
SEARCHING...
NOT FOUND
PRINTER
ME21
PAIR
ME21
PAIR
ME21
TEST
ME21
UNPAIR BACK
BACK
ME21
PAIRED
TEST
PRINTING...
REMOVED
CONNECTION
12: PRINTER MENU
If Printer is not found If PC/ Mobile Device
is not found
If Printer is connected If connection to PC/ Mobile device already exists
mmHg
17.4
ID 9
1/100
OD OS
OD
18/09/2017
07:37:45 AM
mmHg 12.6
OS
18/09/2017
07:37:45 AM
18/09/2017
07:37:45 AM
2/100 TO MENU
ME21
4.5
TO MENU
ENGLISH
SOUMI
SVENSKA
DEUTSCH
1733RM001
1.00 A
SN
1733RM001
hh:mm
17:mm
17:15
DD.MM.YYYY
DD.MM.2017
DD.03.2017
16.03.2017
ERROR
PRINTER
ERROR
CONNECTION
RESTORED
CONNECTION
ME21
PAIRED
TEST
PRINTING...
PAIR
NEW
PAIR
740A
TEST
740A
UNPAIR
740A
WAITING...
DEVICE
WAITING...
DEVICE
PAIRED
740A
TBD
CONNECTION
CANCELLED
PAIRING
CANCELLED
012345
740A
PAIRED
740A
BLUETOOTH
Icare EXPORT
OD OS
1.6
EYE
OD OS
OD
OD
OD
OD
OD
OD
EYE
OD OS
ID 9 ID 9
ID 9 ID 9
ID 9
ID 9
ID 9
ID 9
ID 9
ID 9
2/100
3/100
SOUND
SOUND
SOUND
SOUND
SOUNDSOUND
16:36:10
16/03/2017
EYE
OD OS
EYE
OS
OD
mmHg
16.6
OD
mmHg
mmHg 17.4
16.5
mmHg
16.5
ID 9
OD
LIGHTLIGHT
ME21
RECEIPT
OFF
TOO FAR
REPEAT
TOO NEAR
CHANGE
CHANGE
calibration
Sensor
CHANGE
CHANGE
14.0
14.1 14.2
14.4 14.6
14.3
14.5
14.7 14.9
14.8
14.10 14.11
REPEAT
LOAD LOAD
mmHg
mmHg
mmHg
mmHg
mmHg
mmHg
14: ERRORs & ALERTs
14.13
1.0
1.9
1.10
1.11
1.12
1.13
1.15
12.0
12.2 13.0
13.1
13.2
13.5
13.1
13.6
13.7
13.8
13.9
13.3
13.3
13.412.3
12.4
12.6
12.7
12.8
12.9
12.10
12.4
12.6
12.8
12.8
12.5
12.5
12.1
IF PRINTER
CONNECTED
1.14
1.16
2.1
2.2
2.3
2.0
0.1
0.2
0.3
Document name: GUI Flowchart TA031
Document number: TA031-GUI
Revision: 04
Date: 11.14.2017
Author: Tomi Lonka (Desigence)
1.17 1.18
SERVICE
14.12
MEASURE
1.8
1.7
PATIENT IDHISTORY INFO
ID 1mmHg
5.2
5.3
5.4
5.5
5.0
BLUETOOTH
740A
4.3
4.4
4.6
4.1
BLUETOOTH
OFF
4.2
BLUETOOTH
EXPORT
4.0
3.1
3.0
3.2
3.3
9.0
DATE
16.03.2017
TIME
17:15
10.0 11.0
10.1
10.2
10.3
8.0
8.1
8.3
8.4
LANGUAGE
ENGLISH
8.2
17.6
23.9
20.8
16.5
17.6
17.4
23.8
1.1 1.2
1.4 1.51.3
EYE EYE
OFF
PATIENT ID BLUETOOTH
BLUETOOTH
RETURN
2.4
BACK
ID 1
PATIENT ID
ID02
PATIENT ID
5.1
6.2
6.3
6.4
6.5
6.0
LIGHT
6.1
LIGHT
LIGHT
LIGHT
7.1
7.2
7.3
7.4
BRIGHTNESS
7.0
BRIGHTNESS
BRIGHTNESS
BRIGHTNESS
LANGUAGE
KIELI
SPRÅK
SPRACHE
BRIGHTNESS
EN
FI
SV
DE
9.1
9.3
9.4
9.2
FORMAT
YEAR
MONTH
DAY
DMY
2017
03
16
11.1
FORMAT
HOURS
MINUTES
24 H
SW
17
15
2.5
RETURN
17.2 17.817.4
---- ----18.2
PRINT
PRINTING...
ID 9
mmHg
ME21
RECEIPT
IF PRINTER
CONNECTED
PRINT
PRINTING...
12: PRINTER MENU
13: PC/ MOBILE MENU
13: PC/ MOBILE MENU
NEW
PAIR
FOUND 1
SEARCHING...
NOT FOUND
PRINTER
ME21
PAIR
ME21
PAIR
ME21
TEST
ME21
UNPAIR BACK
BACK
ME21
PAIRED
TEST
PRINTING...
REMOVED
CONNECTION
12: PRINTER MENU
If Printer is not found If PC/ Mobile Device
is not found
If Printer is connected If connection to PC/ Mobile device already exists
mmHg
17.4
ID 9
1/100
OD OS
OD
18/09/2017
07:37:45 AM
mmHg 12.6
OS
18/09/2017
07:37:45 AM
18/09/2017
07:37:45 AM
2/100 TO MENU
ME21
4.5
TO MENU
ENGLISH
SOUMI
SVENSKA
DEUTSCH
1733RM001
1.00 A
SN
1733RM001
hh:mm
17:mm
17:15
DD.MM.YYYY
DD.MM.2017
DD.03.2017
16.03.2017
ERROR
PRINTER
ERROR
CONNECTION
RESTORED
CONNECTION
ME21
PAIRED
TEST
PRINTING...
PAIR
NEW
PAIR
740A
TEST
740A
UNPAIR
740A
WAITING...
DEVICE
WAITING...
DEVICE
PAIRED
740A
TBD
CONNECTION
CANCELLED
PAIRING
CANCELLED
012345
740A
PAIRED
740A
BLUETOOTH
Icare EXPORT
OD OS
1.6
EYE
OD OS
OD
OD
OD
OD
OD
OD
EYE
OD OS
ID 9 ID 9
ID 9 ID 9
ID 9
ID 9
ID 9
ID 9
ID 9
ID 9
2/100
3/100
SOUND
SOUND
SOUND
SOUND
SOUNDSOUND
16:36:10
16/03/2017
EYE
OD OS
EYE
OS
OD
mmHg
16.6
OD
mmHg
mmHg 17.4
16.5
mmHg
16.5
ID 9
OD
LIGHTLIGHT
ME21
RECEIPT
OFF
TOO FAR
REPEAT
TOO NEAR
CHANGE
CHANGE
calibration
Sensor
CHANGE
CHANGE
14.0
14.1 14.2
14.4 14.6
14.3
14.5
14.7 14.9
14.8
14.10 14.11
REPEAT
LOAD LOAD
mmHg
mmHg
mmHg
mmHg
mmHg
mmHg
14: ERRORs & ALERTs
14.13
1.0
1.9
1.10
1.11
1.12
1.13
1.15
12.0
12.2 13.0
13.1
13.2
13.5
13.1
13.6
13.7
13.8
13.9
13.3
13.3
13.412.3
12.4
12.6
12.7
12.8
12.9
12.10
12.4
12.6
12.8
12.8
12.5
12.5
12.1
IF PRINTER
CONNECTED
1.14
1.16
2.1
2.2
2.3
2.0
0.1
0.2
0.3
Document name: GUI Flowchart TA031
Document number: TA031-GUI
Revision: 04
Date: 11.14.2017
Author: Tomi Lonka (Desigence)
1.17 1.18
SERVICE
14.12
MEASURE
1.8
1.7
PATIENT IDHISTORY INFO
ID 1mmHg
5.2
5.3
5.4
5.5
5.0
BLUETOOTH
740A
4.3
4.4
4.6
4.1
BLUETOOTH
OFF
4.2
BLUETOOTH
EXPORT
4.0
3.1
3.0
3.2
3.3
9.0
DATE
16.03.2017
TIME
17:15
10.0 11.0
10.1
10.2
10.3
8.0
8.1
8.3
8.4
LANGUAGE
ENGLISH
8.2
17.6
23.9
20.8
16.5
17.6
17.4
23.8
1.1 1.2
1.4 1.51.3
EYE EYE
OFF
PATIENT ID BLUETOOTH
BLUETOOTH
RETURN
2.4
BACK
ID 1
PATIENT ID
ID02
PATIENT ID
5.1
6.2
6.3
6.4
6.5
6.0
LIGHT
6.1
LIGHT
LIGHT
LIGHT
7.1
7.2
7.3
7.4
BRIGHTNESS
7.0
BRIGHTNESS
BRIGHTNESS
BRIGHTNESS
LANGUAGE
KIELI
SPRÅK
SPRACHE
BRIGHTNESS
EN
FI
SV
DE
9.1
9.3
9.4
9.2
FORMAT
YEAR
MONTH
DAY
DMY
2017
03
16
11.1
FORMAT
HOURS
MINUTES
24 H
SW
17
15
2.5
RETURN
17.2 17.817.4
---- ----18.2
PRINT
PRINTING...
ID 9
mmHg
ME21
RECEIPT
IF PRINTER
CONNECTED
PRINT
PRINTING...
12: PRINTER MENU
13: PC/ MOBILE MENU
13: PC/ MOBILE MENU
NEW
PAIR
FOUND 1
SEARCHING...
NOT FOUND
PRINTER
ME21
PAIR
ME21
PAIR
ME21
TEST
ME21
UNPAIR BACK
BACK
ME21
PAIRED
TEST
PRINTING...
REMOVED
CONNECTION
12: PRINTER MENU
If Printer is not found If PC/ Mobile Device
is not found
If Printer is connected If connection to PC/ Mobile device already exists
mmHg
17.4
ID 9
1/100
OD OS
OD
18/09/2017
07:37:45 AM
mmHg 12.6
OS
18/09/2017
07:37:45 AM
18/09/2017
07:37:45 AM
2/100 TO MENU
ME21
4.5
TO MENU
ENGLISH
SOUMI
SVENSKA
DEUTSCH
1733RM001
1.00 A
SN
1733RM001
hh:mm
17:mm
17:15
DD.MM.YYYY
DD.MM.2017
DD.03.2017
16.03.2017
ERROR
PRINTER
ERROR
CONNECTION
RESTORED
CONNECTION
ME21
PAIRED
TEST
PRINTING...
PAIR
NEW
PAIR
740A
TEST
740A
UNPAIR
740A
WAITING...
DEVICE
WAITING...
DEVICE
PAIRED
740A
TBD
CONNECTION
CANCELLED
PAIRING
CANCELLED
012345
740A
PAIRED
740A
BLUETOOTH
Icare EXPORT
OD OS
1.6
EYE
OD OS
OD
OD
OD
OD
OD
OD
EYE
OD OS
ID 9 ID 9
ID 9 ID 9
ID 9
ID 9
ID 9
ID 9
ID 9
ID 9
2/100
3/100
SOUND
SOUND
SOUND
SOUND
SOUNDSOUND
16:36:10
16/03/2017
EYE
OD OS
EYE
OS
OD
mmHg
16.6
OD
mmHg
mmHg 17.4
16.5
mmHg
16.5
ID 9
OD
LIGHTLIGHT
ME21
RECEIPT
OFF
TOO FAR
REPEAT
TOO NEAR
CHANGE
CHANGE
calibration
Sensor
CHANGE
CHANGE
14.0
14.1 14.2
14.4 14.6
14.3
14.5
14.7 14.9
14.8
14.10 14.11
REPEAT
LOAD LOAD
mmHg
mmHg
mmHg
mmHg
mmHg
mmHg
14: ERRORs & ALERTs
14.13
1.0
1.9
1.10
1.11
1.12
1.13
1.15
12.0
12.2 13.0
13.1
13.2
13.5
13.1
13.6
13.7
13.8
13.9
13.3
13.3
13.412.3
12.4
12.6
12.7
12.8
12.9
12.10
12.4
12.6
12.8
12.8
12.5
12.5
12.1
IF PRINTER
CONNECTED
1.14
1.16
2.1
2.2
2.3
2.0
0.1
0.2
0.3
Document name: GUI Flowchart TA031
Document number: TA031-GUI
Revision: 04
Date: 11.14.2017
Author: Tomi Lonka (Desigence)
1.17 1.18
SERVICE
14.12
MEASURE
1.8
1.7
PATIENT IDHISTORY INFO
ID 1mmHg
5.2
5.3
5.4
5.5
5.0
BLUETOOTH
740A
4.3
4.4
4.6
4.1
BLUETOOTH
OFF
4.2
BLUETOOTH
EXPORT
4.0
3.1
3.0
3.2
3.3
9.0
DATE
16.03.2017
TIME
17:15
10.0 11.0
10.1
10.2
10.3
8.0
8.1
8.3
8.4
LANGUAGE
ENGLISH
8.2
17.6
23.9
20.8
16.5
17.6
17.4
23.8
1.1 1.2
1.4 1.51.3
EYE EYE
OFF
PATIENT ID BLUETOOTH
BLUETOOTH
RETURN
2.4
BACK
ID 1
PATIENT ID
ID02
PATIENT ID
5.1
6.2
6.3
6.4
6.5
6.0
LIGHT
6.1
LIGHT
LIGHT
LIGHT
7.1
7.2
7.3
7.4
BRIGHTNESS
7.0
BRIGHTNESS
BRIGHTNESS
BRIGHTNESS
LANGUAGE
KIELI
SPRÅK
SPRACHE
BRIGHTNESS
EN
FI
SV
DE
9.1
9.3
9.4
9.2
FORMAT
YEAR
MONTH
DAY
DMY
2017
03
16
11.1
FORMAT
HOURS
MINUTES
24 H
SW
17
15
2.5
RETURN
17.2 17.817.4
---- ----18.2
PRINT
PRINTING...
ID 9
mmHg
ME21
RECEIPT
IF PRINTER
CONNECTED
PRINT
PRINTING...
12: PRINTER MENU
13: PC/ MOBILE MENU
13: PC/ MOBILE MENU
NEW
PAIR
FOUND 1
SEARCHING...
NOT FOUND
PRINTER
ME21
PAIR
ME21
PAIR
ME21
TEST
ME21
UNPAIR BACK
BACK
ME21
PAIRED
TEST
PRINTING...
REMOVED
CONNECTION
12: PRINTER MENU
If Printer is not found If PC/ Mobile Device
is not found
If Printer is connected If connection to PC/ Mobile device already exists
mmHg
17.4
ID 9
1/100
OD OS
OD
18/09/2017
07:37:45 AM
mmHg 12.6
OS
18/09/2017
07:37:45 AM
18/09/2017
07:37:45 AM
2/100 TO MENU
ME21
4.5
TO MENU
ENGLISH
SOUMI
SVENSKA
DEUTSCH
1733RM001
1.00 A
SN
1733RM001
hh:mm
17:mm
17:15
DD.MM.YYYY
DD.MM.2017
DD.03.2017
16.03.2017
ERROR
PRINTER
ERROR
CONNECTION
RESTORED
CONNECTION
ME21
PAIRED
TEST
PRINTING...
PAIR
NEW
PAIR
740A
TEST
740A
UNPAIR
740A
WAITING...
DEVICE
WAITING...
DEVICE
PAIRED
740A
TBD
CONNECTION
CANCELLED
PAIRING
CANCELLED
012345
740A
PAIRED
740A
BLUETOOTH
Icare EXPORT
OD OS
1.6
EYE
OD OS
OD
OD
OD
OD
OD
OD
EYE
OD OS
ID 9 ID 9
ID 9 ID 9
ID 9
ID 9
ID 9
ID 9
ID 9
ID 9
2/100
3/100
SOUND
SOUND
SOUND
SOUND
SOUNDSOUND
16:36:10
16/03/2017
EYE
OD OS
EYE
OS
OD
mmHg
16.6
OD
mmHg
mmHg 17.4
16.5
mmHg
16.5
ID 9
OD
LIGHTLIGHT
ME21
RECEIPT
OFF
TOO FAR
REPEAT
TOO NEAR
CHANGE
CHANGE
calibration
Sensor
CHANGE
CHANGE
14.0
14.1 14.2
14.4 14.6
14.3
14.5
14.7 14.9
14.8
14.10 14.11
REPEAT
LOAD LOAD
mmHg
mmHg
mmHg
mmHg
mmHg
mmHg
14: ERRORs & ALERTs
14.13
1.0
1.9
1.10
1.11
1.12
1.13
1.15
12.0
12.2 13.0
13.1
13.2
13.5
13.1
13.6
13.7
13.8
13.9
13.3
13.3
13.412.3
12.4
12.6
12.7
12.8
12.9
12.10
12.4
12.6
12.8
12.8
12.5
12.5
12.1
IF PRINTER
CONNECTED
1.14
1.16
2.1
2.2
2.3
2.0
0.1
0.2
0.3
Document name: GUI Flowchart TA031
Document number: TA031-GUI
Revision: 04
Date: 11.14.2017
Author: Tomi Lonka (Desigence)
1.17 1.18
SERVICE
14.12
MEASURE
1.8
1.7
PATIENT IDHISTORY INFO
ID 1mmHg
5.2
5.3
5.4
5.5
5.0
BLUETOOTH
740A
4.3
4.4
4.6
4.1
BLUETOOTH
OFF
4.2
BLUETOOTH
EXPORT
4.0
3.1
3.0
3.2
3.3
9.0
DATE
16.03.2017
TIME
17:15
10.0 11.0
10.1
10.2
10.3
8.0
8.1
8.3
8.4
LANGUAGE
ENGLISH
8.2
17.6
23.9
20.8
16.5
17.6
17.4
23.8
1.1 1.2
1.4 1.51.3
EYE EYE
OFF
PATIENT ID BLUETOOTH
BLUETOOTH
RETURN
2.4
BACK
ID 1
PATIENT ID
ID02
PATIENT ID
5.1
6.2
6.3
6.4
6.5
6.0
LIGHT
6.1
LIGHT
LIGHT
LIGHT
7.1
7.2
7.3
7.4
BRIGHTNESS
7.0
BRIGHTNESS
BRIGHTNESS
BRIGHTNESS
LANGUAGE
KIELI
SPRÅK
SPRACHE
BRIGHTNESS
EN
FI
SV
DE
9.1
9.3
9.4
9.2
FORMAT
YEAR
MONTH
DAY
DMY
2017
03
16
11.1
FORMAT
HOURS
MINUTES
24 H
SW
17
15
2.5
RETURN
17.2 17.817.4
---- ----18.2
PRINT
PRINTING...
ID 9
mmHg
ME21
RECEIPT
IF PRINTER
CONNECTED
PRINT
PRINTING...
12: PRINTER MENU
13: PC/ MOBILE MENU
13: PC/ MOBILE MENU
NEW
PAIR
FOUND 1
SEARCHING...
NOT FOUND
PRINTER
ME21
PAIR
ME21
PAIR
ME21
TEST
ME21
UNPAIR BACK
BACK
ME21
PAIRED
TEST
PRINTING...
REMOVED
CONNECTION
12: PRINTER MENU
If Printer is not found If PC/ Mobile Device
is not found
If Printer is connected If connection to PC/ Mobile device already exists
mmHg
17.4
ID 9
1/100
OD OS
OD
18/09/2017
07:37:45 AM
mmHg 12.6
OS
18/09/2017
07:37:45 AM
18/09/2017
07:37:45 AM
2/100 TO MENU
ME21
4.5
TO MENU
ENGLISH
SOUMI
SVENSKA
DEUTSCH
1733RM001
1.00 A
SN
1733RM001
hh:mm
17:mm
17:15
DD.MM.YYYY
DD.MM.2017
DD.03.2017
16.03.2017
ERROR
PRINTER
ERROR
CONNECTION
RESTORED
CONNECTION
ME21
PAIRED
TEST
PRINTING...
PAIR
NEW
PAIR
740A
TEST
740A
UNPAIR
740A
WAITING...
DEVICE
WAITING...
DEVICE
PAIRED
740A
TBD
CONNECTION
CANCELLED
PAIRING
CANCELLED
012345
740A
PAIRED
740A
BLUETOOTH
Icare EXPORT
OD OS
1.6
EYE
OD OS
OD
OD
OD
OD
OD
OD
EYE
OD OS
ID 9 ID 9
ID 9 ID 9
ID 9
ID 9
ID 9
ID 9
ID 9
ID 9
2/100
3/100
SOUND
SOUND
SOUND
SOUND
SOUNDSOUND
16:36:10
16/03/2017
EYE
OD OS
EYE
OS
OD
mmHg
16.6
OD
mmHg
mmHg 17.4
16.5
mmHg
16.5
ID 9
OD

ENGLISHIcare ic200 tonometer manual
www.icaretonometer.com
8
MEASUREMENT
PRECAUTION
If the tonometer is not used for 3 minutes, it will automatically switch itself off.
PRECAUTION
Do not use any anesthetic to numb the eye, an anesthetic can affect the measurement results (Badouin C, Gastaud P. Influence of topical anesthesia on
tonometeric values of intraocular pressure. Ophthalmologica 1994; 208: 309–313). No anesthetic is required when performing measurements with this device.
WARNING
The tonometer device must not come into contact with the patient’s eyes. When adjusting the forehead resting support for the tonometer, do not
accidentally push the tonometer or probe into the eye. The tonometer’s forehead spacing support needs to be adjusted to maintain the tip of the
probe about 5 mm, or about 3/16 inch, from the eye. During measurement, only the probe makes contact with eye, for a fraction of a second.
When measuring, the tonometer and probe needs to be positioned approximately perpendicular to the surface at the center of the cornea of the eye.
STEP 1. Ask the patient to relax. Whether seated or standing, ask the patient to assume a straight and upright posture of their head and neck. Ask the patient to
look straight ahead at a specific point. Bring the tonometer in front of the patient’s eye.
Correct head and eye position. Incorrect head and eye position.
STEP 2. You may choose to annotate the measurement result with the eye’s side (right/left) information. Note that the device’s default selection is NO eye side
information. Select between the OD (right eye) and the OS (left eye) by pressing the Navigation buttons.
The tonometer is now Ready to Measure, indicated by the “Play” symbol displayed on the screen. If you have selected and confirmed the eye side or the patient ID,
this information is also displayed on the screen.
LIGHTLIGHT
ME21
RECEIPT
OFF
TOO FAR
REPEAT
TOO NEAR
CHANGE
CHANGE
calibration
Sensor
CHANGE
CHANGE
14.0
14.1 14.2
14.4 14.6
14.3
14.5
14.7 14.9
14.8
14.10 14.11
REPEAT
LOAD LOAD
mmHg
mmHg
mmHg
mmHg
mmHg
mmHg
14: ERRORs & ALERTs
14.13
1.0
1.9
1.10
1.11
1.12
1.13
1.15
12.0
12.2 13.0
13.1
13.2
13.5
13.1
13.6
13.7
13.8
13.9
13.3
13.3
13.412.3
12.4
12.6
12.7
12.8
12.9
12.10
12.4
12.6
12.8
12.8
12.5
12.5
12.1
IF PRINTER
CONNECTED
1.14
1.16
2.1
2.2
2.3
2.0
0.1
0.2
0.3
Document name: GUI Flowchart TA031
Document number: TA031-GUI
Revision: 04
Date: 11.14.2017
Author: Tomi Lonka (Desigence)
1.17 1.18
SERVICE
14.12
MEASURE
1.8
1.7
PATIENT IDHISTORY INFO
ID 1mmHg
5.2
5.3
5.4
5.5
5.0
BLUETOOTH
740A
4.3
4.4
4.6
4.1
BLUETOOTH
OFF
4.2
BLUETOOTH
EXPORT
4.0
3.1
3.0
3.2
3.3
9.0
DATE
16.03.2017
TIME
17:15
10.0 11.0
10.1
10.2
10.3
8.0
8.1
8.3
8.4
LANGUAGE
ENGLISH
8.2
17.6
23.9
20.8
16.5
17.6
17.4
23.8
1.1 1.2
1.4 1.51.3
EYE EYE
OFF
PATIENT ID BLUETOOTH
BLUETOOTH
RETURN
2.4
BACK
ID 1
PATIENT ID
ID02
PATIENT ID
5.1
6.2
6.3
6.4
6.5
6.0
LIGHT
6.1
LIGHT
LIGHT
LIGHT
7.1
7.2
7.3
7.4
BRIGHTNESS
7.0
BRIGHTNESS
BRIGHTNESS
BRIGHTNESS
LANGUAGE
KIELI
SPRÅK
SPRACHE
BRIGHTNESS
EN
FI
SV
DE
9.1
9.3
9.4
9.2
FORMAT
YEAR
MONTH
DAY
DMY
2017
03
16
11.1
FORMAT
HOURS
MINUTES
24 H
SW
17
15
2.5
RETURN
17.2 17.817.4
---- ----18.2
PRINT
PRINTING...
ID 9
mmHg
ME21
RECEIPT
IF PRINTER
CONNECTED
PRINT
PRINTING...
12: PRINTER MENU
13: PC/ MOBILE MENU
13: PC/ MOBILE MENU
NEW
PAIR
FOUND 1
SEARCHING...
NOT FOUND
PRINTER
ME21
PAIR
ME21
PAIR
ME21
TEST
ME21
UNPAIR BACK
BACK
ME21
PAIRED
TEST
PRINTING...
REMOVED
CONNECTION
12: PRINTER MENU
If Printer is not found If PC/ Mobile Device
is not found
If Printer is connected If connection to PC/ Mobile device already exists
mmHg
17.4
ID 9
1/100
OD OS
OD
18/09/2017
07:37:45 AM
mmHg 12.6
OS
18/09/2017
07:37:45 AM
18/09/2017
07:37:45 AM
2/100 TO MENU
ME21
4.5
TO MENU
ENGLISH
SOUMI
SVENSKA
DEUTSCH
1733RM001
1.00 A
SN
1733RM001
hh:mm
17:mm
17:15
DD.MM.YYYY
DD.MM.2017
DD.03.2017
16.03.2017
ERROR
PRINTER
ERROR
CONNECTION
RESTORED
CONNECTION
ME21
PAIRED
TEST
PRINTING...
PAIR
NEW
PAIR
740A
TEST
740A
UNPAIR
740A
WAITING...
DEVICE
WAITING...
DEVICE
PAIRED
740A
TBD
CONNECTION
CANCELLED
PAIRING
CANCELLED
012345
740A
PAIRED
740A
BLUETOOTH
Icare EXPORT
OD OS
1.6
EYE
OD OS
OD
OD
OD
OD
OD
OD
EYE
OD OS
ID 9
ID 9
ID 9 ID 9
ID 9
ID 9
ID 9
ID 9
ID 9
ID 9
2/100
3/100
SOUND
SOUND
SOUND
SOUND
SOUNDSOUND
16:36:10
16/03/2017
EYE
OD OS
EYE
OS
OD
mmHg
16.6
OD
mmHg
mmHg 17.4
16.5
mmHg
16.5
ID 9
OD
LIGHTLIGHT
ME21
RECEIPT
OFF
TOO FAR
REPEAT
TOO NEAR
CHANGE
CHANGE
calibration
Sensor
CHANGE
CHANGE
14.0
14.1 14.2
14.4 14.6
14.3
14.5
14.7 14.9
14.8
14.10 14.11
REPEAT
LOAD LOAD
mmHg
mmHg
mmHg
mmHg
mmHg
mmHg
14: ERRORs & ALERTs
14.13
1.0
1.9
1.10
1.11
1.12
1.13
1.15
12.0
12.2 13.0
13.1
13.2
13.5
13.1
13.6
13.7
13.8
13.9
13.3
13.3
13.412.3
12.4
12.6
12.7
12.8
12.9
12.10
12.4
12.6
12.8
12.8
12.5
12.5
12.1
IF PRINTER
CONNECTED
1.14
1.16
2.1
2.2
2.3
2.0
0.1
0.2
0.3
Document name: GUI Flowchart TA031
Document number: TA031-GUI
Revision: 04
Date: 11.14.2017
Author: Tomi Lonka (Desigence)
1.17 1.18
SERVICE
14.12
MEASURE
1.8
1.7
PATIENT IDHISTORY INFO
ID 1mmHg
5.2
5.3
5.4
5.5
5.0
BLUETOOTH
740A
4.3
4.4
4.6
4.1
BLUETOOTH
OFF
4.2
BLUETOOTH
EXPORT
4.0
3.1
3.0
3.2
3.3
9.0
DATE
16.03.2017
TIME
17:15
10.0 11.0
10.1
10.2
10.3
8.0
8.1
8.3
8.4
LANGUAGE
ENGLISH
8.2
17.6
23.9
20.8
16.5
17.6
17.4
23.8
1.1 1.2
1.4 1.51.3
EYE EYE
OFF
PATIENT ID BLUETOOTH
BLUETOOTH
RETURN
2.4
BACK
ID 1
PATIENT ID
ID02
PATIENT ID
5.1
6.2
6.3
6.4
6.5
6.0
LIGHT
6.1
LIGHT
LIGHT
LIGHT
7.1
7.2
7.3
7.4
BRIGHTNESS
7.0
BRIGHTNESS
BRIGHTNESS
BRIGHTNESS
LANGUAGE
KIELI
SPRÅK
SPRACHE
BRIGHTNESS
EN
FI
SV
DE
9.1
9.3
9.4
9.2
FORMAT
YEAR
MONTH
DAY
DMY
2017
03
16
11.1
FORMAT
HOURS
MINUTES
24 H
SW
17
15
2.5
RETURN
17.2 17.817.4
---- ----18.2
PRINT
PRINTING...
ID 9
mmHg
ME21
RECEIPT
IF PRINTER
CONNECTED
PRINT
PRINTING...
12: PRINTER MENU
13: PC/ MOBILE MENU
13: PC/ MOBILE MENU
NEW
PAIR
FOUND 1
SEARCHING...
NOT FOUND
PRINTER
ME21
PAIR
ME21
PAIR
ME21
TEST
ME21
UNPAIR BACK
BACK
ME21
PAIRED
TEST
PRINTING...
REMOVED
CONNECTION
12: PRINTER MENU
If Printer is not found If PC/ Mobile Device
is not found
If Printer is connected If connection to PC/ Mobile device already exists
mmHg
17.4
ID 9
1/100
OD OS
OD
18/09/2017
07:37:45 AM
mmHg 12.6
OS
18/09/2017
07:37:45 AM
18/09/2017
07:37:45 AM
2/100 TO MENU
ME21
4.5
TO MENU
ENGLISH
SOUMI
SVENSKA
DEUTSCH
1733RM001
1.00 A
SN
1733RM001
hh:mm
17:mm
17:15
DD.MM.YYYY
DD.MM.2017
DD.03.2017
16.03.2017
ERROR
PRINTER
ERROR
CONNECTION
RESTORED
CONNECTION
ME21
PAIRED
TEST
PRINTING...
PAIR
NEW
PAIR
740A
TEST
740A
UNPAIR
740A
WAITING...
DEVICE
WAITING...
DEVICE
PAIRED
740A
TBD
CONNECTION
CANCELLED
PAIRING
CANCELLED
012345
740A
PAIRED
740A
BLUETOOTH
Icare EXPORT
OD OS
1.6
EYE
OD OS
OD
OD
OD
OD
OD
OD
EYE
OD OS
ID 9 ID 9
ID 9 ID 9
ID 9
ID 9
ID 9
ID 9
ID 9
ID 9
2/100
3/100
SOUND
SOUND
SOUND
SOUND
SOUNDSOUND
16:36:10
16/03/2017
EYE
OD OS
EYE
OS
OD
mmHg
16.6
OD
mmHg
mmHg 17.4
16.5
mmHg
16.5
ID 9
OD
LIGHTLIGHT
ME21
RECEIPT
OFF
TOO FAR
REPEAT
TOO NEAR
CHANGE
CHANGE
calibration
Sensor
CHANGE
CHANGE
14.0
14.1 14.2
14.4 14.6
14.3
14.5
14.7 14.9
14.8
14.10 14.11
REPEAT
LOAD LOAD
mmHg
mmHg
mmHg
mmHg
mmHg
mmHg
14: ERRORs & ALERTs
14.13
1.0
1.9
1.10
1.11
1.12
1.13
1.15
12.0
12.2 13.0
13.1
13.2
13.5
13.1
13.6
13.7
13.8
13.9
13.3
13.3
13.412.3
12.4
12.6
12.7
12.8
12.9
12.10
12.4
12.6
12.8
12.8
12.5
12.5
12.1
IF PRINTER
CONNECTED
1.14
1.16
2.1
2.2
2.3
2.0
0.1
0.2
0.3
Document name: GUI Flowchart TA031
Document number: TA031-GUI
Revision: 04
Date: 11.14.2017
Author: Tomi Lonka (Desigence)
1.17 1.18
SERVICE
14.12
MEASURE
1.8
1.7
PATIENT IDHISTORY INFO
ID 1mmHg
5.2
5.3
5.4
5.5
5.0
BLUETOOTH
740A
4.3
4.4
4.6
4.1
BLUETOOTH
OFF
4.2
BLUETOOTH
EXPORT
4.0
3.1
3.0
3.2
3.3
9.0
DATE
16.03.2017
TIME
17:15
10.0 11.0
10.1
10.2
10.3
8.0
8.1
8.3
8.4
LANGUAGE
ENGLISH
8.2
17.6
23.9
20.8
16.5
17.6
17.4
23.8
1.1 1.2
1.4 1.51.3
EYE EYE
OFF
PATIENT ID BLUETOOTH
BLUETOOTH
RETURN
2.4
BACK
ID 1
PATIENT ID
ID02
PATIENT ID
5.1
6.2
6.3
6.4
6.5
6.0
LIGHT
6.1
LIGHT
LIGHT
LIGHT
7.1
7.2
7.3
7.4
BRIGHTNESS
7.0
BRIGHTNESS
BRIGHTNESS
BRIGHTNESS
LANGUAGE
KIELI
SPRÅK
SPRACHE
BRIGHTNESS
EN
FI
SV
DE
9.1
9.3
9.4
9.2
FORMAT
YEAR
MONTH
DAY
DMY
2017
03
16
11.1
FORMAT
HOURS
MINUTES
24 H
SW
17
15
2.5
RETURN
17.2 17.817.4
---- ----18.2
PRINT
PRINTING...
ID 9
mmHg
ME21
RECEIPT
IF PRINTER
CONNECTED
PRINT
PRINTING...
12: PRINTER MENU
13: PC/ MOBILE MENU
13: PC/ MOBILE MENU
NEW
PAIR
FOUND 1
SEARCHING...
NOT FOUND
PRINTER
ME21
PAIR
ME21
PAIR
ME21
TEST
ME21
UNPAIR BACK
BACK
ME21
PAIRED
TEST
PRINTING...
REMOVED
CONNECTION
12: PRINTER MENU
If Printer is not found If PC/ Mobile Device
is not found
If Printer is connected If connection to PC/ Mobile device already exists
mmHg
17.4
ID 9
1/100
OD OS
OD
18/09/2017
07:37:45 AM
mmHg 12.6
OS
18/09/2017
07:37:45 AM
18/09/2017
07:37:45 AM
2/100 TO MENU
ME21
4.5
TO MENU
ENGLISH
SOUMI
SVENSKA
DEUTSCH
1733RM001
1.00 A
SN
1733RM001
hh:mm
17:mm
17:15
DD.MM.YYYY
DD.MM.2017
DD.03.2017
16.03.2017
ERROR
PRINTER
ERROR
CONNECTION
RESTORED
CONNECTION
ME21
PAIRED
TEST
PRINTING...
PAIR
NEW
PAIR
740A
TEST
740A
UNPAIR
740A
WAITING...
DEVICE
WAITING...
DEVICE
PAIRED
740A
TBD
CONNECTION
CANCELLED
PAIRING
CANCELLED
012345
740A
PAIRED
740A
BLUETOOTH
Icare EXPORT
OD OS
1.6
EYE
OD OS
OD
OD
OD
OD
OD
OD
EYE
OD OS
ID 9 ID 9
ID 9 ID 9
ID 9
ID 9
ID 9
ID 9
ID 9
ID 9
2/100
3/100
SOUND
SOUND
SOUND
SOUND
SOUNDSOUND
16:36:10
16/03/2017
EYE
OD OS
EYE
OS
OD
mmHg
16.6
OD
mmHg
mmHg 17.4
16.5
mmHg
16.5
ID 9
OD
LIGHTLIGHT
ME21
RECEIPT
OFF
TOO FAR
REPEAT
TOO NEAR
CHANGE
CHANGE
calibration
Sensor
CHANGE
CHANGE
14.0
14.1 14.2
14.4 14.6
14.3
14.5
14.7 14.9
14.8
14.10 14.11
REPEAT
LOAD LOAD
mmHg
mmHg
mmHg
mmHg
mmHg
mmHg
14: ERRORs & ALERTs
14.13
1.0
1.9
1.10
1.11
1.12
1.13
1.15
12.0
12.2 13.0
13.1
13.2
13.5
13.1
13.6
13.7
13.8
13.9
13.3
13.3
13.412.3
12.4
12.6
12.7
12.8
12.9
12.10
12.4
12.6
12.8
12.8
12.5
12.5
12.1
IF PRINTER
CONNECTED
1.14
1.16
2.1
2.2
2.3
2.0
0.1
0.2
0.3
Document name: GUI Flowchart TA031
Document number: TA031-GUI
Revision: 04
Date: 11.14.2017
Author: Tomi Lonka (Desigence)
1.17 1.18
SERVICE
14.12
MEASURE
1.8
1.7
PATIENT IDHISTORY INFO
ID 1mmHg
5.2
5.3
5.4
5.5
5.0
BLUETOOTH
740A
4.3
4.4
4.6
4.1
BLUETOOTH
OFF
4.2
BLUETOOTH
EXPORT
4.0
3.1
3.0
3.2
3.3
9.0
DATE
16.03.2017
TIME
17:15
10.0 11.0
10.1
10.2
10.3
8.0
8.1
8.3
8.4
LANGUAGE
ENGLISH
8.2
17.6
23.9
20.8
16.5
17.6
17.4
23.8
1.1 1.2
1.4 1.51.3
EYE EYE
OFF
PATIENT ID BLUETOOTH
BLUETOOTH
RETURN
2.4
BACK
ID 1
PATIENT ID
ID02
PATIENT ID
5.1
6.2
6.3
6.4
6.5
6.0
LIGHT
6.1
LIGHT
LIGHT
LIGHT
7.1
7.2
7.3
7.4
BRIGHTNESS
7.0
BRIGHTNESS
BRIGHTNESS
BRIGHTNESS
LANGUAGE
KIELI
SPRÅK
SPRACHE
BRIGHTNESS
EN
FI
SV
DE
9.1
9.3
9.4
9.2
FORMAT
YEAR
MONTH
DAY
DMY
2017
03
16
11.1
FORMAT
HOURS
MINUTES
24 H
SW
17
15
2.5
RETURN
17.2 17.817.4
---- ----18.2
PRINT
PRINTING...
ID 9
mmHg
ME21
RECEIPT
IF PRINTER
CONNECTED
PRINT
PRINTING...
12: PRINTER MENU
13: PC/ MOBILE MENU
13: PC/ MOBILE MENU
NEW
PAIR
FOUND 1
SEARCHING...
NOT FOUND
PRINTER
ME21
PAIR
ME21
PAIR
ME21
TEST
ME21
UNPAIR BACK
BACK
ME21
PAIRED
TEST
PRINTING...
REMOVED
CONNECTION
12: PRINTER MENU
If Printer is not found If PC/ Mobile Device
is not found
If Printer is connected If connection to PC/ Mobile device already exists
mmHg
17.4
ID 9
1/100
OD OS
OD
18/09/2017
07:37:45 AM
mmHg 12.6
OS
18/09/2017
07:37:45 AM
18/09/2017
07:37:45 AM
2/100 TO MENU
ME21
4.5
TO MENU
ENGLISH
SOUMI
SVENSKA
DEUTSCH
1733RM001
1.00 A
SN
1733RM001
hh:mm
17:mm
17:15
DD.MM.YYYY
DD.MM.2017
DD.03.2017
16.03.2017
ERROR
PRINTER
ERROR
CONNECTION
RESTORED
CONNECTION
ME21
PAIRED
TEST
PRINTING...
PAIR
NEW
PAIR
740A
TEST
740A
UNPAIR
740A
WAITING...
DEVICE
WAITING...
DEVICE
PAIRED
740A
TBD
CONNECTION
CANCELLED
PAIRING
CANCELLED
012345
740A
PAIRED
740A
BLUETOOTH
Icare EXPORT
OD OS
1.6
EYE
OD OS
OD
OD
OD
OD
OD
OD
EYE
OD OS
ID 9 ID 9
ID 9 ID 9
ID 9
ID 9
ID 9
ID 9
ID 9
ID 9
2/100
3/100
SOUND
SOUND
SOUND
SOUND
SOUNDSOUND
16:36:10
16/03/2017
EYE
OD OS
EYE
OS
OD
mmHg
16.6
OD
mmHg
mmHg 17.4
16.5
mmHg
16.5
ID 9
OD
Ready to measure display with the eye’s side selection options: OD, no information, OS. Patient ID selected

ENGLISH
Icare ic200 tonometer manual
www.icaretonometer.com
9
STEP 3. Ensure that the forehead support is fully extended by turning the forehead support adjustment wheel. In order to perform a successful measurement,
the distance from the tip of the probe to the patient’s cornea (see picture) should be about 5 mm (about 3/16 inch). Bring the tonometer in front of the patient’s
eye with the probe pointing to the center of the cornea until the forehead support touches the forehead. Do not accidentally push the tonometer or probe into
the eye. Adjust the probe -cornea distance for your patient by turning the forehead support adjustment wheel.
Always adjust the position of the tonometer such that the probe is pointing towards the center of the cornea and is perpendicular to
the surface of the cornea.
Correct device position. Incorrect device position.
STEP 4. An IOP measurement can be performed using the tonometer either in Single Mode or in Series Mode. Each IOP measurement is calculated from six
individual and consecutive rebound measurements:
LIGHTLIGHT
ME21
RECEIPT
OFF
TOO FAR
REPEAT
TOO NEAR
CHANGE
CHANGE
calibration
Sensor
CHANGE
CHANGE
14.0
14.1 14.2
14.4 14.6
14.3
14.5
14.7 14.9
14.8
14.10 14.11
REPEAT
LOAD LOAD
mmHg
mmHg
mmHg
mmHg
mmHg
mmHg
14: ERRORs & ALERTs
14.13
1.0
1.9
1.10
1.11
1.12
1.13
1.15
12.0
12.2 13.0
13.1
13.2
13.5
13.1
13.6
13.7
13.8
13.9
13.3
13.3
13.412.3
12.4
12.6
12.7
12.8
12.9
12.10
12.4
12.6
12.8
12.8
12.5
12.5
12.1
IF PRINTER
CONNECTED
1.14
1.16
2.1
2.2
2.3
2.0
0.1
0.2
0.3
Document name: GUI Flowchart TA031
Document number: TA031-GUI
Revision: 04
Date: 11.14.2017
Author: Tomi Lonka (Desigence)
1.17 1.18
SERVICE
14.12
MEASURE
1.8
1.7
PATIENT IDHISTORY INFO
ID 1mmHg
5.2
5.3
5.4
5.5
5.0
BLUETOOTH
740A
4.3
4.4
4.6
4.1
BLUETOOTH
OFF
4.2
BLUETOOTH
EXPORT
4.0
3.1
3.0
3.2
3.3
9.0
DATE
16.03.2017
TIME
17:15
10.0 11.0
10.1
10.2
10.3
8.0
8.1
8.3
8.4
LANGUAGE
ENGLISH
8.2
17.6
23.9
20.8
16.5
17.6
17.4
23.8
1.1 1.2
1.4 1.51.3
EYE EYE
OFF
PATIENT ID BLUETOOTH
BLUETOOTH
RETURN
2.4
BACK
ID 1
PATIENT ID
ID02
PATIENT ID
5.1
6.2
6.3
6.4
6.5
6.0
LIGHT
6.1
LIGHT
LIGHT
LIGHT
7.1
7.2
7.3
7.4
BRIGHTNESS
7.0
BRIGHTNESS
BRIGHTNESS
BRIGHTNESS
LANGUAGE
KIELI
SPRÅK
SPRACHE
BRIGHTNESS
EN
FI
SV
DE
9.1
9.3
9.4
9.2
FORMAT
YEAR
MONTH
DAY
DMY
2017
03
16
11.1
FORMAT
HOURS
MINUTES
24 H
SW
17
15
2.5
RETURN
17.2 17.817.4
---- ----18.2
PRINT
PRINTING...
ID 9
mmHg
ME21
RECEIPT
IF PRINTER
CONNECTED
PRINT
PRINTING...
12: PRINTER MENU
13: PC/ MOBILE MENU
13: PC/ MOBILE MENU
NEW
PAIR
FOUND 1
SEARCHING...
NOT FOUND
PRINTER
ME21
PAIR
ME21
PAIR
ME21
TEST
ME21
UNPAIR BACK
BACK
ME21
PAIRED
TEST
PRINTING...
REMOVED
CONNECTION
12: PRINTER MENU
If Printer is not found If PC/ Mobile Device
is not found
If Printer is connected If connection to PC/ Mobile device already exists
mmHg
17.4
ID 9
1/100
OD OS
OD
18/09/2017
07:37:45 AM
mmHg 12.6
OS
18/09/2017
07:37:45 AM
18/09/2017
07:37:45 AM
2/100 TO MENU
ME21
4.5
TO MENU
ENGLISH
SOUMI
SVENSKA
DEUTSCH
1733RM001
1.00 A
SN
1733RM001
hh:mm
17:mm
17:15
DD.MM.YYYY
DD.MM.2017
DD.03.2017
16.03.2017
ERROR
PRINTER
ERROR
CONNECTION
RESTORED
CONNECTION
ME21
PAIRED
TEST
PRINTING...
PAIR
NEW
PAIR
740A
TEST
740A
UNPAIR
740A
WAITING...
DEVICE
WAITING...
DEVICE
PAIRED
740A
TBD
CONNECTION
CANCELLED
PAIRING
CANCELLED
012345
740A
PAIRED
740A
BLUETOOTH
Icare EXPORT
OD OS
1.6
EYE
OD OS
OD
OD
OD
OD
OD
OD
EYE
OD OS
ID 9 ID 9
ID 9 ID 9
ID 9
ID 9
ID 9
ID 9
ID 9
ID 9
2/100
3/100
SOUND
SOUND
SOUND
SOUND
SOUNDSOUND
16:36:10
16/03/2017
EYE
OD OS
EYE
OS
OD
mmHg
16.6
OD
mmHg
mmHg 17.4
16.5
mmHg
16.5
ID 9
OD
LIGHTLIGHT
ME21
RECEIPT
OFF
TOO FAR
REPEAT
TOO NEAR
CHANGE
CHANGE
calibration
Sensor
CHANGE
CHANGE
14.0
14.1 14.2
14.4 14.6
14.3
14.5
14.7 14.9
14.8
14.10 14.11
REPEAT
LOAD LOAD
mmHg
mmHg
mmHg
mmHg
mmHg
mmHg
14: ERRORs & ALERTs
14.13
1.0
1.9
1.10
1.11
1.12
1.13
1.15
12.0
12.2 13.0
13.1
13.2
13.5
13.1
13.6
13.7
13.8
13.9
13.3
13.3
13.412.3
12.4
12.6
12.7
12.8
12.9
12.10
12.4
12.6
12.8
12.8
12.5
12.5
12.1
IF PRINTER
CONNECTED
1.14
1.16
2.1
2.2
2.3
2.0
0.1
0.2
0.3
Document name: GUI Flowchart TA031
Document number: TA031-GUI
Revision: 04
Date: 11.14.2017
Author: Tomi Lonka (Desigence)
1.17 1.18
SERVICE
14.12
MEASURE
1.8
1.7
PATIENT IDHISTORY INFO
ID 1mmHg
5.2
5.3
5.4
5.5
5.0
BLUETOOTH
740A
4.3
4.4
4.6
4.1
BLUETOOTH
OFF
4.2
BLUETOOTH
EXPORT
4.0
3.1
3.0
3.2
3.3
9.0
DATE
16.03.2017
TIME
17:15
10.0 11.0
10.1
10.2
10.3
8.0
8.1
8.3
8.4
LANGUAGE
ENGLISH
8.2
17.6
23.9
20.8
16.5
17.6
17.4
23.8
1.1 1.2
1.4 1.51.3
EYE EYE
OFF
PATIENT ID BLUETOOTH
BLUETOOTH
RETURN
2.4
BACK
ID 1
PATIENT ID
ID02
PATIENT ID
5.1
6.2
6.3
6.4
6.5
6.0
LIGHT
6.1
LIGHT
LIGHT
LIGHT
7.1
7.2
7.3
7.4
BRIGHTNESS
7.0
BRIGHTNESS
BRIGHTNESS
BRIGHTNESS
LANGUAGE
KIELI
SPRÅK
SPRACHE
BRIGHTNESS
EN
FI
SV
DE
9.1
9.3
9.4
9.2
FORMAT
YEAR
MONTH
DAY
DMY
2017
03
16
11.1
FORMAT
HOURS
MINUTES
24 H
SW
17
15
2.5
RETURN
17.2 17.817.4
---- ----18.2
PRINT
PRINTING...
ID 9
mmHg
ME21
RECEIPT
IF PRINTER
CONNECTED
PRINT
PRINTING...
12: PRINTER MENU
13: PC/ MOBILE MENU
13: PC/ MOBILE MENU
NEW
PAIR
FOUND 1
SEARCHING...
NOT FOUND
PRINTER
ME21
PAIR
ME21
PAIR
ME21
TEST
ME21
UNPAIR BACK
BACK
ME21
PAIRED
TEST
PRINTING...
REMOVED
CONNECTION
12: PRINTER MENU
If Printer is not found If PC/ Mobile Device
is not found
If Printer is connected If connection to PC/ Mobile device already exists
mmHg
17.4
ID 9
1/100
OD OS
OD
18/09/2017
07:37:45 AM
mmHg 12.6
OS
18/09/2017
07:37:45 AM
18/09/2017
07:37:45 AM
2/100 TO MENU
ME21
4.5
TO MENU
ENGLISH
SOUMI
SVENSKA
DEUTSCH
1733RM001
1.00 A
SN
1733RM001
hh:mm
17:mm
17:15
DD.MM.YYYY
DD.MM.2017
DD.03.2017
16.03.2017
ERROR
PRINTER
ERROR
CONNECTION
RESTORED
CONNECTION
ME21
PAIRED
TEST
PRINTING...
PAIR
NEW
PAIR
740A
TEST
740A
UNPAIR
740A
WAITING...
DEVICE
WAITING...
DEVICE
PAIRED
740A
TBD
CONNECTION
CANCELLED
PAIRING
CANCELLED
012345
740A
PAIRED
740A
BLUETOOTH
Icare EXPORT
OD OS
1.6
EYE
OD OS
OD
OD
OD
OD
OD
OD
EYE
OD OS
ID 9 ID 9
ID 9 ID 9
ID 9
ID 9
ID 9
ID 9
ID 9
ID 9
2/100
3/100
SOUND
SOUND
SOUND
SOUND
SOUNDSOUND
16:36:10
16/03/2017
EYE
OD OS
EYE
OS
OD
mmHg
16.6
OD
mmHg
mmHg 17.4
16.5
mmHg
16.5
ID 9
OD
Single Mode: Press the Measure button gently but firmly. As when taking a picture with a camera, do not shake the
tonometer. The tip of the measurement probe will make contact with the central cornea. Take six measurements.
The grey segments of a circle on the display screen will turn blue one by one. In addition, the device will emit a short
“beep” sound after each successful measurement.
Series Mode: Press and hold the Measure button down. The device will automatically make a series of
measurements. After the first successful measurement, one segment of the circle will be lit blue, additional
segments will turn blue as the tonometer continues to measure. Measuring in Series Mode will take just a few
seconds.
If the tonometer detects an error occurring during the measurement, it will beep twice and an error message
will be displayed. To remove the error message from the display, press the Measure button and proceed to the
measurements. For more information about error messages, see Error and Info Messages in this manual.

ENGLISHIcare ic200 tonometer manual
www.icaretonometer.com
10
STEP 5. Once six measurements have been successfully made, the tonometer will emit one long beep sound. The final IOP measurement is displayed in large
digits, in mm Hg, inside a colored circle on the display screen. The colors indicate the quality of the IOP measurement. Green indicates “good” (a low variation
of the observed parameters of probe motion during the four individual measurements used in the calculation of the final IOP), yellow indicates “acceptable”
measurement quality.
If the variation in the measurements is too high, the tonometer will display the Repeat symbol on the display screen. A new measurement series can be initiated
by pressing the Measure button once.
LIGHTLIGHT
ME21
RECEIPT
OFF
TOO FAR
REPEAT
TOO NEAR
CHANGE
CHANGE
calibration
Sensor
CHANGE
CHANGE
14.0
14.1 14.2
14.4 14.6
14.3
14.5
14.7 14.9
14.8
14.10 14.11
REPEAT
LOAD LOAD
mmHg
mmHg
mmHg
mmHg
mmHg
mmHg
14: ERRORs & ALERTs
14.13
1.0
1.9
1.10
1.11
1.12
1.13
1.15
12.0
12.2 13.0
13.1
13.2
13.5
13.1
13.6
13.7
13.8
13.9
13.3
13.3
13.412.3
12.4
12.6
12.7
12.8
12.9
12.10
12.4
12.6
12.8
12.8
12.5
12.5
12.1
IF PRINTER
CONNECTED
1.14
1.16
2.1
2.2
2.3
2.0
0.1
0.2
0.3
Document name: GUI Flowchart TA031
Document number: TA031-GUI
Revision: 04
Date: 11.14.2017
Author: Tomi Lonka (Desigence)
1.17 1.18
SERVICE
14.12
MEASURE
1.8
1.7
PATIENT IDHISTORY INFO
ID 1mmHg
5.2
5.3
5.4
5.5
5.0
BLUETOOTH
740A
4.3
4.4
4.6
4.1
BLUETOOTH
OFF
4.2
BLUETOOTH
EXPORT
4.0
3.1
3.0
3.2
3.3
9.0
DATE
16.03.2017
TIME
17:15
10.0 11.0
10.1
10.2
10.3
8.0
8.1
8.3
8.4
LANGUAGE
ENGLISH
8.2
17.6
23.9
20.8
16.5
17.6
17.4
23.8
1.1 1.2
1.4 1.51.3
EYE EYE
OFF
PATIENT ID BLUETOOTH
BLUETOOTH
RETURN
2.4
BACK
ID 1
PATIENT ID
ID02
PATIENT ID
5.1
6.2
6.3
6.4
6.5
6.0
LIGHT
6.1
LIGHT
LIGHT
LIGHT
7.1
7.2
7.3
7.4
BRIGHTNESS
7.0
BRIGHTNESS
BRIGHTNESS
BRIGHTNESS
LANGUAGE
KIELI
SPRÅK
SPRACHE
BRIGHTNESS
EN
FI
SV
DE
9.1
9.3
9.4
9.2
FORMAT
YEAR
MONTH
DAY
DMY
2017
03
16
11.1
FORMAT
HOURS
MINUTES
24 H
SW
17
15
2.5
RETURN
17.2 17.817.4
---- ----18.2
PRINT
PRINTING...
ID 9
mmHg
ME21
RECEIPT
IF PRINTER
CONNECTED
PRINT
PRINTING...
12: PRINTER MENU
13: PC/ MOBILE MENU
13: PC/ MOBILE MENU
NEW
PAIR
FOUND 1
SEARCHING...
NOT FOUND
PRINTER
ME21
PAIR
ME21
PAIR
ME21
TEST
ME21
UNPAIR BACK
BACK
ME21
PAIRED
TEST
PRINTING...
REMOVED
CONNECTION
12: PRINTER MENU
If Printer is not found If PC/ Mobile Device
is not found
If Printer is connected If connection to PC/ Mobile device already exists
mmHg
17.4
ID 9
1/100
OD OS
OD
18/09/2017
07:37:45 AM
mmHg 12.6
OS
18/09/2017
07:37:45 AM
18/09/2017
07:37:45 AM
2/100 TO MENU
ME21
4.5
TO MENU
ENGLISH
SOUMI
SVENSKA
DEUTSCH
1733RM001
1.00 A
SN
1733RM001
hh:mm
17:mm
17:15
DD.MM.YYYY
DD.MM.2017
DD.03.2017
16.03.2017
ERROR
PRINTER
ERROR
CONNECTION
RESTORED
CONNECTION
ME21
PAIRED
TEST
PRINTING...
PAIR
NEW
PAIR
740A
TEST
740A
UNPAIR
740A
WAITING...
DEVICE
WAITING...
DEVICE
PAIRED
740A
TBD
CONNECTION
CANCELLED
PAIRING
CANCELLED
012345
740A
PAIRED
740A
BLUETOOTH
Icare EXPORT
OD OS
1.6
EYE
OD OS
OD
OD
OD
OD
OD
OD
EYE
OD OS
ID 9 ID 9
ID 9 ID 9
ID 9
ID 9
ID 9
ID 9
ID 9
ID 9
2/100
3/100
SOUND
SOUND
SOUND
SOUND
SOUNDSOUND
16:36:10
16/03/2017
EYE
OD OS
EYE
OS
OD
mmHg
16.6
OD
mmHg
mmHg
17.4
16.5
mmHg
16.5
ID 9
OD
LIGHTLIGHT
ME21
RECEIPT
OFF
TOO FAR
REPEAT
TOO NEAR
CHANGE
CHANGE
calibration
Sensor
CHANGE
CHANGE
14.0
14.1 14.2
14.4 14.6
14.3
14.5
14.7 14.9
14.8
14.10 14.11
REPEAT
LOAD LOAD
mmHg
mmHg
mmHg
mmHg
mmHg
mmHg
14: ERRORs & ALERTs
14.13
1.0
1.9
1.10
1.11
1.12
1.13
1.15
12.0
12.2 13.0
13.1
13.2
13.5
13.1
13.6
13.7
13.8
13.9
13.3
13.3
13.412.3
12.4
12.6
12.7
12.8
12.9
12.10
12.4
12.6
12.8
12.8
12.5
12.5
12.1
IF PRINTER
CONNECTED
1.14
1.16
2.1
2.2
2.3
2.0
0.1
0.2
0.3
Document name: GUI Flowchart TA031
Document number: TA031-GUI
Revision: 04
Date: 11.14.2017
Author: Tomi Lonka (Desigence)
1.17 1.18
SERVICE
14.12
MEASURE
1.8
1.7
PATIENT IDHISTORY INFO
ID 1mmHg
5.2
5.3
5.4
5.5
5.0
BLUETOOTH
740A
4.3
4.4
4.6
4.1
BLUETOOTH
OFF
4.2
BLUETOOTH
EXPORT
4.0
3.1
3.0
3.2
3.3
9.0
DATE
16.03.2017
TIME
17:15
10.0 11.0
10.1
10.2
10.3
8.0
8.1
8.3
8.4
LANGUAGE
ENGLISH
8.2
17.6
23.9
20.8
16.5
17.6
17.4
23.8
1.1 1.2
1.4 1.51.3
EYE EYE
OFF
PATIENT ID BLUETOOTH
BLUETOOTH
RETURN
2.4
BACK
ID 1
PATIENT ID
ID02
PATIENT ID
5.1
6.2
6.3
6.4
6.5
6.0
LIGHT
6.1
LIGHT
LIGHT
LIGHT
7.1
7.2
7.3
7.4
BRIGHTNESS
7.0
BRIGHTNESS
BRIGHTNESS
BRIGHTNESS
LANGUAGE
KIELI
SPRÅK
SPRACHE
BRIGHTNESS
EN
FI
SV
DE
9.1
9.3
9.4
9.2
FORMAT
YEAR
MONTH
DAY
DMY
2017
03
16
11.1
FORMAT
HOURS
MINUTES
24 H
SW
17
15
2.5
RETURN
17.2 17.817.4
---- ----18.2
PRINT
PRINTING...
ID 9
mmHg
ME21
RECEIPT
IF PRINTER
CONNECTED
PRINT
PRINTING...
12: PRINTER MENU
13: PC/ MOBILE MENU
13: PC/ MOBILE MENU
NEW
PAIR
FOUND 1
SEARCHING...
NOT FOUND
PRINTER
ME21
PAIR
ME21
PAIR
ME21
TEST
ME21
UNPAIR BACK
BACK
ME21
PAIRED
TEST
PRINTING...
REMOVED
CONNECTION
12: PRINTER MENU
If Printer is not found If PC/ Mobile Device
is not found
If Printer is connected If connection to PC/ Mobile device already exists
mmHg
17.4
ID 9
1/100
OD OS
OD
18/09/2017
07:37:45 AM
mmHg 12.6
OS
18/09/2017
07:37:45 AM
18/09/2017
07:37:45 AM
2/100 TO MENU
ME21
4.5
TO MENU
ENGLISH
SOUMI
SVENSKA
DEUTSCH
1733RM001
1.00 A
SN
1733RM001
hh:mm
17:mm
17:15
DD.MM.YYYY
DD.MM.2017
DD.03.2017
16.03.2017
ERROR
PRINTER
ERROR
CONNECTION
RESTORED
CONNECTION
ME21
PAIRED
TEST
PRINTING...
PAIR
NEW
PAIR
740A
TEST
740A
UNPAIR
740A
WAITING...
DEVICE
WAITING...
DEVICE
PAIRED
740A
TBD
CONNECTION
CANCELLED
PAIRING
CANCELLED
012345
740A
PAIRED
740A
BLUETOOTH
Icare EXPORT
OD OS
1.6
EYE
OD OS
OD
OD
OD
OD
OD
OD
EYE
OD OS
ID 9 ID 9
ID 9 ID 9
ID 9
ID 9
ID 9
ID 9
ID 9
ID 9
2/100
3/100
SOUND
SOUND
SOUND
SOUND
SOUNDSOUND
16:36:10
16/03/2017
EYE
OD OS
EYE
OS
OD
mmHg
16.6
OD
mmHg
mmHg
17.4
16.5
mmHg
16.5
ID 9
OD
LIGHTLIGHT
ME21
RECEIPT
OFF
TOO FAR
REPEAT
TOO NEAR
CHANGE
CHANGE
calibration
Sensor
CHANGE
CHANGE
14.0
14.1 14.2
14.4 14.6
14.3
14.5
14.7 14.9
14.8
14.10 14.11
REPEAT
LOAD LOAD
mmHg
mmHg
mmHg
mmHg
mmHg
mmHg
14: ERRORs & ALERTs
14.13
1.0
1.9
1.10
1.11
1.12
1.13
1.15
12.0
12.2 13.0
13.1
13.2
13.5
13.1
13.6
13.7
13.8
13.9
13.3
13.3
13.412.3
12.4
12.6
12.7
12.8
12.9
12.10
12.4
12.6
12.8
12.8
12.5
12.5
12.1
IF PRINTER
CONNECTED
1.14
1.16
2.1
2.2
2.3
2.0
0.1
0.2
0.3
Document name: GUI Flowchart TA031
Document number: TA031-GUI
Revision: 04
Date: 11.14.2017
Author: Tomi Lonka (Desigence)
1.17 1.18
SERVICE
14.12
MEASURE
1.8
1.7
PATIENT IDHISTORY INFO
ID 1mmHg
5.2
5.3
5.4
5.5
5.0
BLUETOOTH
740A
4.3
4.4
4.6
4.1
BLUETOOTH
OFF
4.2
BLUETOOTH
EXPORT
4.0
3.1
3.0
3.2
3.3
9.0
DATE
16.03.2017
TIME
17:15
10.0 11.0
10.1
10.2
10.3
8.0
8.1
8.3
8.4
LANGUAGE
ENGLISH
8.2
17.6
23.9
20.8
16.5
17.6
17.4
23.8
1.1 1.2
1.4 1.51.3
EYE EYE
OFF
PATIENT ID BLUETOOTH
BLUETOOTH
RETURN
2.4
BACK
ID 1
PATIENT ID
ID02
PATIENT ID
5.1
6.2
6.3
6.4
6.5
6.0
LIGHT
6.1
LIGHT
LIGHT
LIGHT
7.1
7.2
7.3
7.4
BRIGHTNESS
7.0
BRIGHTNESS
BRIGHTNESS
BRIGHTNESS
LANGUAGE
KIELI
SPRÅK
SPRACHE
BRIGHTNESS
EN
FI
SV
DE
9.1
9.3
9.4
9.2
FORMAT
YEAR
MONTH
DAY
DMY
2017
03
16
11.1
FORMAT
HOURS
MINUTES
24 H
SW
17
15
2.5
RETURN
17.2 17.817.4
---- ----18.2
PRINT
PRINTING...
ID 9
mmHg
ME21
RECEIPT
IF PRINTER
CONNECTED
PRINT
PRINTING...
12: PRINTER MENU
13: PC/ MOBILE MENU
13: PC/ MOBILE MENU
NEW
PAIR
FOUND 1
SEARCHING...
NOT FOUND
PRINTER
ME21
PAIR
ME21
PAIR
ME21
TEST
ME21
UNPAIR BACK
BACK
ME21
PAIRED
TEST
PRINTING...
REMOVED
CONNECTION
12: PRINTER MENU
If Printer is not found If PC/ Mobile Device
is not found
If Printer is connected If connection to PC/ Mobile device already exists
mmHg
17.4
ID 9
1/100
OD OS
OD
18/09/2017
07:37:45 AM
mmHg 12.6
OS
18/09/2017
07:37:45 AM
18/09/2017
07:37:45 AM
2/100 TO MENU
ME21
4.5
TO MENU
ENGLISH
SOUMI
SVENSKA
DEUTSCH
1733RM001
1.00 A
SN
1733RM001
hh:mm
17:mm
17:15
DD.MM.YYYY
DD.MM.2017
DD.03.2017
16.03.2017
ERROR
PRINTER
ERROR
CONNECTION
RESTORED
CONNECTION
ME21
PAIRED
TEST
PRINTING...
PAIR
NEW
PAIR
740A
TEST
740A
UNPAIR
740A
WAITING...
DEVICE
WAITING...
DEVICE
PAIRED
740A
TBD
CONNECTION
CANCELLED
PAIRING
CANCELLED
012345
740A
PAIRED
740A
BLUETOOTH
Icare EXPORT
OD OS
1.6
EYE
OD OS
OD
OD
OD
OD
OD
OD
EYE
OD OS
ID 9 ID 9
ID 9 ID 9
ID 9
ID 9
ID 9
ID 9
ID 9
ID 9
2/100
3/100
SOUND
SOUND
SOUND
SOUND
SOUNDSOUND
16:36:10
16/03/2017
EYE
OD OS
EYE
OS
OD
mmHg
16.6
OD
mmHg
mmHg 17.4
16.5
mmHg
16.5
ID 9
OD
The values from the first to the fifth value displayed before the sixth value are running average values. The sixth value is the final IOP value which is calculated
from the best four individual measurements (the worst two individual measurements are discarded).
STEP 6. After an IOP measurement has been successfully made from one eye, you may measure the IOP in the other eye (or make a repeat measurement in the
same eye) by repeating the steps 1-5 above. The device does not automatically switch from one eye to another after one eye is measured, e.g. from OD to OS.
When you have finished your IOP measurement session, hold the device so that the probe is horizontally or slightly downward tilted, press the Select button for
three seconds to turn the tonometer off. The probe comes out from the probe base and you can remove it. Discard the probe (according to instructions). Retrieve
the probe base cover and place over the probe base.
Note: When the tonometer is not in use, always keep the probe base covered to protect the probe base from contamination.
If you doubt the validity of any of the tonometer’s displayed measurements of IOP (for example, if you suspect that the probe missed the central cornea or made
contact with the eyelid), it is recommended that you repeat the measurement. In addition, if you observe an unusually high or low displayed value of IOP, it is
recommended that you make another measurement, either with the Icare tonometer or using an alternative method in order to verify the unusual reading.
If you are unable to complete six successful measurements in a sequence, the measurement process can be terminated by pressing the Select button once. In
such an instance, the results of the measurement attempt can be viewed in the device’s HISTORY menu. Note that in cases of unfinished measurements, IOP data
from the individual steps are displayed with no indication of measurement validity.