IDS IDS805 User manual

Users Guide to Keypad
Functions
MANUALNO.700-266-01AISSUEDNOVEMBER2003 VERSION1.00
I
N
H
E
P
D
I
G
I
T
A
L
S
E
C
U
R
I
T
Y
IDS

2 IDS805 USER MANUAL NO. 700-266-01A ISSUED NOV 2003 VER 1.00
IDS805USERMANUAL
Summary of Operation
mrasid/mrA ]#[ +]EDOCRESU[
mrAyawAkciuQ
nwoddloH ]1[ dnoces1rof
mrAyatSkciuQ
nwoddloH ]5[ dnoces1rof
oG&mrAyatSkciuQ
nwoddloH ]6[ dnoces1rof
cinaP
nwoddloH ]P[ dnoces1rof
eriF
nwoddloH ]F[ dnoces1rof
ycnegremElacideM
nwoddloH ]M[ dnoces1rof
yromeMmralA
nwoddloH ]0[ dnoces1rof
eliforPyatSegnahC ]EDOM[ +]9[ +]REBMUNELIFORP[ +[!!
!
!!]
enozassapyB [!!
!
!!]+]REBMUNENOZ[
enozemihcmargorP
nwoddloH ]2[ [+dnoces1rof ]REBMUNENOZ
+[!!
!
!!]
enozyatsmargorP
nwoddloH ]3[ [+dnoces1rof ]REBMUNENOZ
+[!!
!
!!]
enozzzubmargorP
nwoddloH ]4[ [+dnoces1rof ]REBMUNENOZ
+[!!
!
!!]
sutatSelbuorTweiV
nwoddloH ]7[ dnoces1rof
sseruD ]#[ +]EDOCSSERUD[

IDS805 USER MANUAL NO. 700-266-01A ISSUED NOV 2003 VER 1.00 3
IDS805USERMANUAL
Contents
Glossary ..........................................................................5
1. Introduction to the IDS805 ............................................6
1.1 Notes ................................................................................6
2. Understanding the Keypad Indicators .........................7
3. Operation of the Keypad ...............................................8
4. System Information.........................................................8
4.1 Programmed Functions....................................................8
4.2 User Codes.......................................................................9
4.3 ZoneInformation ...............................................................9
5. Arming the System........................................................10
5.1 Away Arming Procedure .................................................10
5.2 Quick Away Arming ........................................................10
5.3 Stay Arming ....................................................................11
5.3.1 To Enter a Stay Profile ............................................................ 11
5.3.2 To Stay Arm ............................................................................12
5.4 Quick Stay Arming ..........................................................12
5.5 Stay Arm and Go ............................................................12
5.6 Arming from a Key-Switch or Remote Control ...............13
5.7 Auto-Arming ....................................................................13
5.8 Arming with Entry/ exit or Follower Zones Violated .........14
5.9 Forced Arming ................................................................14
6. Zone Bypassing ............................................................14
6.1 To Bypass a Zone ...........................................................14
6.2 To Un-Bypass a Zone......................................................15
7. Disarming the System ..................................................15
7.1 Disarming with a User Code...........................................15
7.2 To Disarm with a Key-Switch or Remote Control ...........16

4 IDS805 USER MANUAL NO. 700-266-01A ISSUED NOV 2003 VER 1.00
IDS805USERMANUAL
8. Emergency Situations..................................................16
8.1 Fire Alarm .......................................................................16
8.2 Panic Alarm ....................................................................17
8.3 MedicalAlarm .................................................................17
8.4 Duress Code ..................................................................17
9.0 Emergency Evacuation Plan .......................................18
10. System Memory ............................................................18
10.1Alarm Memory:................................................................18
10.2Zone Bypassed Memory .................................................19
10.3Zone Tamper Memory .....................................................19
11. User Codes ...................................................................20
11.1Entering New and Changing Existing User Codes..........20
11.2Deleting User Codes.......................................................20
11.3 MaidsCode.....................................................................21
12. Stay Zones.....................................................................21
12.1To Program Stay Zones ..................................................21
12.2To Cancel the Stay Zones...............................................22
13. Buzz Zones ...................................................................22
13.1To Program Buzz Zones.................................................22
13.2To Cancel Buzz Zones....................................................23
14. Chime Zones .................................................................23
14.1To Program the Chime Zones.........................................24
14.2To Cancel the Chime Zones ...........................................24
15. Trouble-Shooting .........................................................24
15.1TroubleConditions ..........................................................24
15.1.1ViewingtheTroubleConditions..............................................25
15.2Problems When Arming the System ..............................25
15.3Problems when disarming the system ...........................26
15.4For Service .....................................................................26

IDS805 USER MANUAL NO. 700-266-01A ISSUED NOV 2003 VER 1.00 5
IDS805USERMANUAL
Glossary
Alarm This is the history of the most recent violations that
Memory occurred the last time the system was armed.
Arm To set the system into the ARMED mode. In this mode,
violating a zone will activate an alarm condition. If the
system is programmed accordingly, will cause a reporting
code to be sent to the monitoring company.
Bypass To deactivate a zone. When the panel is ARMED,
violation of a bypassed zone will be ignored.
Disarm To deactivate the system. Fire, medical and panic
functions remain active while the system is disarmed.
Entry/ Exit A zone with a programmable time delay, which allows the
Zone user to exit the premises after arming the system and
time to get to the keypad after entering the armed
premises. This zone is generally the last exit point of the
building and the first entry point i.e. the front door of a
home.
Follower A zone that may be temporarily violated during the exit
Zone delay period or after violation of an entry/ exit zone. This
allows the user access to disarm the system. A Follower
zone will behave as per an Instant zone if violated prior to
the violation of an entry/ exit zone.
Instant When the system is armed, violation of an instant zone
Zone will immediately cause an alarm condition to be
registered.
Stay Arm Arming that allows for certain preprogrammed, STAY
zonesto be violated while the system is armed.
Stay Arm Arming that allows the user to STAY ARM and leave the
and Go premises.
Stay Zone Zones which are bypassed automatically when the
system is STAY ARMED.
Zone A specific area of your premises guarded by sensors
which detect violations of that area.

6 IDS805 USER MANUAL NO. 700-266-01A ISSUED NOV 2003 VER 1.00
IDS805USERMANUAL
1. Introduction to the IDS805
TheIDS805 Control Panel ismanufactured tothe highest specification
andwill providemanyyears ofservice ifcorrectly installed andmain-
tained.The unitisdesigned forsimple operationyet providesthe
maximum protection for you, your family or business. For trouble free
operationplease follow theinstructions containedin this UserManual.
Your security system consists of a control panel, one or more key-
pads and various sensors and detectors. An enclosure will contain the
control panel which includes the system electronics, fuses and stand-
by battery. There is normally no reason for anyone other than the
installeror service professionalto haveaccessto thecontrol panel.
1.1 Notes
!Read the entire manual carefully and keep it in an accessible
place.
!Your security system should be installed and serviced by a
qualifiedsecurity professionalwho shouldinstruct youregarding
thelevel ofprotectionprovided andthe operationof the system.
!Shouldyou haveany questionsregarding theoperationofthe
system, contact your security company representative.
!Your system should be tested on a regular basis. Before testing
the system please notify your security company of your intention
to do so.
!NEVER disconnect the mains power as the back-up battery will
eventuallydischarge therebycausing thecontrol panelto
shutdown.
!A security system cannot prevent emergencies. It is only
intended to alert you and - if included - your central station of an
emergencysituation.
!Smoke and heat detectors may not detect all fire situations.

IDS805 USER MANUAL NO. 700-266-01A ISSUED NOV 2003 VER 1.00 7
IDS805USERMANUAL
2. Understanding the Keypad Indicators
Referto theillustration oninsidefront coverof manual.
1. ARMED Indicator(Red)
detanimullIdemrAmetsyS
dehsiugnitxEdemrasiDmetsyS
gnihsalFyromeMronoitidnoCmralA
2. AWAY Indicator (Red)
detanimullIedoMyawAnidemrAmetsyS
dehsiugnitxEedoMyatS/demrasiDmetsyS
3. POWER Indicator(Red)
detanimullItneserpsirewoPsniaM
gnihsalFnoitidnoCelbuorT
4. READYIndicator(Green)
detanimullIdemraebotydaersimetsyS
5. ZONE Indicators(Yellow)
detanimullIdessapybenoZ
dehsiugnitxEraelcenoZ
gnihsalFdetaloivenoZ

8 IDS805 USER MANUAL NO. 700-266-01A ISSUED NOV 2003 VER 1.00
IDS805USERMANUAL
3. Operation of the Keypad
To ensure correct operation of your security system it is essential to
familiarize yourself with the use of the keypad.
!The keypad has a buzzer, command entry keys, zone and
system status L.E.D.’s.
!The keypad is used to send commands to the system and to
display the current system status.
!Thekeypad(s) willbe mountedin aconvenientlocation within
the protected premises generally close to the entry/exit zones.
!Afterapreprogrammedperiodofinactivity,the keypadwill
automaticallyenter intoa power-save modeby turningoff allthe
indicators.The keypad “wakesup” orre-illuminates when anykey
ispressed orany zonesare violated.Thepower savefeature is
programmableand maybedisabled.
!A sensor which has registered an alarm condition will be
indicatedonthe keypad bythecorresponding zone lightflashing.
Thekeypad buzzerwill soundunder thefollowing conditions.
!When any key is pressed during the entry of codes.
!Threetimes ifone ormoreof thezones areviolated when
attempting to arm the system.
!Toindicate atroublecondition.
!During the entry/exit delay.
!Will sound 5 times when a chime zone is violated.
4. System Information
4.1 Programmed Functions
Checkwith yourinstaller whichof thefollowing functionshave been
enabled.
"Quick Away Arm
"Quick Stay Arm
"Arm with Entry/Exit or Follower Zones Violated
"Stay Arm
"Stay Arm and Go
"ForcedArming
"Push to Arm
"Siren Sound on Arm/Disarm (double toot - arm/ short toot - disarm)
"Panic Alarm
"FireAlarm

IDS805 USER MANUAL NO. 700-266-01A ISSUED NOV 2003 VER 1.00 9
IDS805USERMANUAL
"ChimeZones
"BuzzZones
"ZoneTamperMonitoring
"Armwith Key-Switch orRemote Control
"Exit Delay with Key-Switch or Remote Control
"InstallersReset afterAlarm
4.2 User Codes
resU .oN edoCresU emaNresU
10:edoCWEN4321:edoCretsaMtluafeD
20304050607080900111213141:edoCsdiaM
51:edoCsseruD
4.3 Zone Information
enoZ epyTenoZ tixE/yrtnE.g.e emaNenoZ roodnehctiK.g.e
1
2
3
4
5
6
7
8

10 IDS805 USER MANUAL NO. 700-266-01A ISSUED NOV 2003 VER 1.00
IDS805USERMANUAL
siyaledyrtnEyramirPehT.sdnoces
siyaledyrtnEyradnoceSehTsdnoces
siyaleDtixEehT.sdnoces
5. Arming the System
Thereare variousoptions forarming thesystem
5.1 Away Arming Procedure
[#]+ [USER CODE]
(Leave via Entry Exit Zone)
1. Ensure that the READY indicator is illuminated; if not, check
that all protected doors and windows are closed and that motion
hasceasedin areas coveredby motion detectors.
2. Ifnecessary, closethe front door.
3. Press the [#] key to cancel any unintended key entries.
4. Entera valid 4digit[USER CODE]. Ifyou make a mistake,press
the [#] key and re-enter the code.
5. The ARMED indicator will illuminate and the keypad’s buzzer will
sound on and off for the duration of the exit delay.Any bypassed
zones will be shown by a steady illuminated zone indicator.
6. Thearming processhasbegun. Leaveonly viathefollower and
entry/exit zones.
7. The panel will arm at the end of the exit delay.
OR
If the panel is so programmed, violating the Push to Arm zone will
armthe panelimmediately.
5.2 QuickAwayArming
[1]
(Hold down the key until the keypad buzzer sounds)
If this function is enabled, it is possible to AWAY arm by simply
holding down the [1] key until the keypad buzzer sounds and the
armingprocess begins.