IEI Technology PCIE-9450 User manual

PCIE-9450
Intel Processor LGA775 Pentium®D
PICMG1.3 Full-Size CPU Card with PCIE-GbE, SATA II RAID, and
USB2.0
Quick Installation Guide
Version 1.0
Mar. 30, 2006
©2006 Copyright by IEI Technology corp.
All rights reserved.
Package Contents
PCIE-9450 package includes the following items:
 1 x PCIE-9450 single board computer
 1 x RS-232 cable for 2 ports P/N: 19800-000051-RS
 1 x ATA 66/100 flat cable P/N: 32200-000052-RS
 4 x SATA cable P/N: 32000-062800-RS
 2 x SATA power cable P/N: 32100-088600-RS
 1 x USB cable for 2 ports P/N: CB-USB02-RS
 1 x Keyboard/ PS2 mouse Y cable P/N: 32000-000138-RS
 1 x mini jumper pack P/N: 33100-000033-RS
 1 x Utility CD
 1 x QIG (quick installation guide)
Ordering Information
Standard
 PCIE-9450
PICMG 1.3 LGA775 Intel Pentium D CPU Card with VGA,Dual PCI-Express
GbE,SATA,USB2.0 and Audio
Optional:
1. Audio cable P/N: AC-KIT08R-R10
2. CPU Cooler P/N: CF-520-RS
3. FDD cable P/N: 32200-000017-RS
4. LPT cable P/N: 19800-000049-RS
If any of these items is missing or damaged, contact the dealer from whom you
purchased this product. Save the shipping materials and carton in case you want
to ship or store the product in the future.

Specifications
 CPU: Intel LGA775 Pentium D support up to FSB 1066 MHz
 BIOS: AMI 4MB Flash Memory
 Chipset: Intel 945G and ICH7R
 System memory: Daul channel, Four DDRII DIMM sockets support up to
4GB DDRII 533/667
 SATA/IDE interface: Support four Serial SATAII hard drives (up to
300MB/s) and two enhanced IDE devices
 FDD interface: Support up to two FDDs
 Serial ports: Two Serial ports (RS232)
 Parallel port: One parallel port, supports SPP/EPP/ECP Modes
 Keyboard/Mouse connector: PS/2 type keyboard and mouse
 Watchdog timer: software programmable
 USB 2.0: Support up to Seven ports
 Video output:CRT Intel GMA 950 support up to 2048x1536@75Hz
 Ethernet: Dual PCI-Express GbE
 Audio: AC97 2.3 (Optional by cable kit)
Block Diagram
Jumpers/Connections
Connector Type
CPU12V 4-pin +12V power connector
IR1 IrDA 1x5 pin header
ATXCTL1 ATX 5VSB 3-pin Header
Fan1 3-pin header
CPU_FAN1
IDE ATA-100 40pin connector
FDD 2x17-pin floppy connector
LPT 2x13 pin header
DIO1 Digital I/O 2x5 pin header
CN2 6-pin KB/MS
COM1/2 2x5pin RS232
SATA1~4 SATAII connector
AUDIO1 2x5 pin header for Audio Kit
USB 2x5 pin for USB2.0
CPU_FAN 4pin for CPU FAN
JP1 Clear COMS
CN1 External Switches and indicators Panel
CN2 KB/MS
COM1~2 2x5 pin header for RS232
USB0~7 2x 4 pin header
Jumpers setting and Connectors
FAN1: Fan Connector
Pin No. Description
1 GND
2 +12V
3 Sensor
ATXCTL1: ATX 5VSB
Pin No Description
1 5VSB
2 PS-ON
3 GND
IR1: IrDA connector
Pin No. Description
1 VCC
2 NC
3 IR-RX
4 GND
5 IR-TX
CPU12V Power connector
Pin Description Pin Description
1 GND 2 GND
3 +12V 4 +12V

JP1 Description
1-2
(Default)* Keep CMOS Setup
Short 2-3 Clear CMOS Setup
COM1/COM2: RS232
Pin No Description Pin No Description
1 DCD- 2 SIN
3 SOUT 4 DTR-
5 GND 6 DSR-
7 RTS- 8 CTS-
9 RI 10 GND
DIO1: Digital I/O
Pin No. Description
1 GND
2 PWR (+5V)
3 XOUT0
4 XOUT1
5 XOUT3
6 XOUT4
7 XIN0
8 XIN1
9 XIN2
10 XIN3
USB01, USB23, USB45, USB 67
Pin No. Description Pin No. Description
1 PWR(+5V) 2 GND
3 USBPB- 4 USBPB+
5 USBPA+ 6 USBPB-
7 GND 8 PWR(+5V)
AUDIO1: AC97 Connector for Audio Module
Pin No Description Pin No Description
1 AC_SYNC 2 AC_CLK
3 AC_SDOUT 4 PC_BEEP
5 AC_SDIN 6 AC_RST#
7 PWR (+5V) 8 GND
9 PWR (+12V) 10 (N/C)GND
9 7 5 3 1
●●●●■
●●●●●
10 8 6 4 2
CN1: External Switches and indicators Panel
Pin Description Pin Description
1 PWR LED+ 2 PC_BEEP
3 PWR LED- 4 GND
5 PWR ON+ 6 NC
7 PWR ON- 8 PWR(+5V)
9 HDD LED+ 10 Reset+
11 HDD LED- 12 Reset-
CN2: KB/MS
Pin No. Description
1 PWR(+5V)
2 MS_DATA
3 MS_CLK
4 MS_DATA
5 MS_CLK
6 GND
CPU_FAN1: Fan Connector
Pin No. Description
1 GND
2 +12V
3 Sensor
4 Control
Board Layout: Jumper and Connector Locations