IEI Technology IAS0-W10B-N6210 User manual

IASO-W10B-N6210 Medical Panel PC
Page i
[MODEL NAME]
User Manual
IASO-W10B-N6210
MODEL:
10.1" Medical Panel PC with Intel® Celeron® Processor N6210,
P-CAP Touchscreen, 4 GB DDR4, HDIM Output, USB 3.2,
COM, Wi-Fi 6E, Isolated GbE, PoE, RFID, Audio and RoHS
Rev. 1.00 - July 4, 2022

IASO-W10B-N6210 Medical Panel PC
Page ii
[MODEL NAME]
Revision
Date
Version
Changes
July 4, 2022
1.00
Initial release

IASO-W10B-N6210 Medical Panel PC
Page iii
[MODEL NAME]
Copyright
COPYRIGHT NOTICE
The information in this document is subject to change without prior notice in order to
improve reliability, design and function and does not represent a commitment on the part
of the manufacturer.
In no event will the manufacturer be liable for direct, indirect, special, incidental, or
consequential damages arising out of the use or inability to use the product or
documentation, even if advised of the possibility of such damages.
This document contains proprietary information protected by copyright. All rights are
reserved. No part of this manual may be reproduced by any mechanical, electronic, or
other means in any form without prior written permission of the manufacturer.
TRADEMARKS
All registered trademarks and product names mentioned herein are used for identification
purposes only and may be trademarks and/or registered trademarks of their respective
owners.
CONTACT INFORMATION
Manufactured by:
IEI Integration Corp.
Address:
No. 29, Zongxing Rd., Xizhi Dist.,
New Taipei City 221, Taiwan
Phone:
[phone]
Fax:
[phone]
Web Site:
www.ieiworld.com
Sales Email:
[email protected]

IASO-W10B-N6210 Medical Panel PC
Page iv
[MODEL NAME]
Manual Conventions
WARNING
Warnings appear where overlooked details may cause damage to the
equipment or result in personal injury. Warnings should be taken
seriously.
CAUTION
Cautionary messages should be heeded to help reduce the chance of
losing data or damaging the product.
NOTE
These messages inform the reader of essential but non-critical
information. These messages should be read carefully as any directions
or instructions contained therein can help avoid making mistakes.

IASO-W10B-N6210 Medical Panel PC
Page v
[MODEL NAME]
Table of Contents
1 INTRODUCTION.......................................................................................................... 1
1.1 OVERVIEW.................................................................................................................. 2
1.2 MODEL VARIATIONS .................................................................................................. 3
1.3 FEATURES................................................................................................................... 3
1.4 FRONT PANEL............................................................................................................. 4
1.5 BOTTOM PANEL ......................................................................................................... 5
1.6 REAR PANEL .............................................................................................................. 6
1.7 SYSTEM SPECIFICATIONS............................................................................................ 7
1.8 DIMENSIONS............................................................................................................. 10
2 UNPACKING ................................................................................................................11
2.1 UNPACKING.............................................................................................................. 12
2.2 PACKING LIST .......................................................................................................... 13
2.3 OPTIONAL ATO ITEMS ............................................................................................. 13
3 INSTALLATION ......................................................................................................... 14
3.1 SAFETY PRECAUTIONS ............................................................................................. 15
3.2 ANTI-STATIC PRECAUTIONS...................................................................................... 17
3.3 INSTALLATION PRECAUTIONS ................................................................................... 18
3.4 GBE CONNECTION ................................................................................................... 19
3.5 RS-232 SERIAL PORT CONNECTION ......................................................................... 20
3.6 AT/ATX MODE SELECTION...................................................................................... 20
3.7 VESA MOUNTING.................................................................................................... 21
3.8 POWERING ON THE SYSTEM ..................................................................................... 22
3.9 CLEAR CMOS.......................................................................................................... 23
3.10 RESET THE SYSTEM ................................................................................................ 23
3.11 SYSTEM MAINTENANCE ......................................................................................... 24
4 DRIVER INSTALLATION......................................................................................... 25
4.1 AVAILABLE DRIVERS................................................................................................ 26
4.2 DRIVER DOWNLOAD ................................................................................................ 26

IASO-W10B-N6210 Medical Panel PC
Page vi
[MODEL NAME]
A REGULATORY COMPLIANCE .............................................................................. 28
B PRODUCT DISPOSAL .............................................................................................. 33
C MAINTENANCE AND CLEANING PRECAUTIONS.......................................... 35
C.1.1 Maintenance and Cleaning ............................................................................. 37
C.1.2 Cleaning Tools................................................................................................. 37
D SYMBOL DEFINITIONS .......................................................................................... 38
E WATCHDOG TIMER................................................................................................. 40
F ERROR BEEP CODE ................................................................................................. 43
F.1 PEI BEEP CODES ...................................................................................................... 44
F.2 DXE BEEP CODES .................................................................................................... 44
G HAZARDOUS MATERIALS DISCLOSURE ......................................................... 45
G.1 ROHS II DIRECTIVE (2015/863/EU) ....................................................................... 46
G.2 CHINA ROHS........................................................................................................... 47

IASO-W10B-N6210 Medical Panel PC
Page vii
[MODEL NAME]
List of Figures
Figure 1-1: IASO-W10B-N6210 Medical Panel PC .......................................................................2
Figure 1-2: Front View....................................................................................................................4
Figure 1-3: Bottom Panel...............................................................................................................5
Figure 1-4: Rear View.....................................................................................................................6
Figure 1-5: Dimensions (mm)......................................................................................................10
Figure 3-1: Ethernet Connector...................................................................................................19
Figure 3-2: AT/ATX Switch Location...........................................................................................20
Figure 3-3: VESA Mounting Retention Screw Holes.................................................................21
Figure 3-4: Power Input Connector and Power Button.............................................................22
Figure 3-5: Clear CMOS Button Location...................................................................................23
Figure 3-6: Reset Button Location..............................................................................................23
Figure 4-1: IEI Resource Download Center................................................................................26

IASO-W10B-N6210 Medical Panel PC
Page viii
[MODEL NAME]
List of Tables
Table 1-1: Model Variations...........................................................................................................3
Table 1-2: System Specifications..................................................................................................9
Table 3-1: Ethernet Connector Pinouts......................................................................................19
Table 3-2: Connector LEDs..........................................................................................................19
Table 3-3: RS-232 Serial Port Pinouts ........................................................................................20

IASO-W10B-N6210 Medical Panel PC
Page 1
1Introduction
Chapter
1

IASO-W10B-N6210 Medical Panel PC
Page 2
1.1 Overview
Figure 1-1: IASO-W10B-N6210 Medical Panel PC
The IASO-W10B-N6210 is an Intel® Celeron® Processor N6210 powered medical-grade
panel PC designed for easy and simplified integration into healthcare applications. The
system is pre-installed with 4 GB of DDR4 memory, ensuring smooth data throughputs
with reduced bottlenecks and fast system access.
One RS-232 serial port and two USB 3.2 Gen 1 ports provide simplified connectivity to a
variety of external peripheral devices. Wi-Fi 6E high efficiency wireless and one GbE
RJ-45 connector (1.5kV isolated) allow for smooth connection of the system to an external
LAN. The GbE connector also supports IEEE802.3 PoE, making the panel PC a PoE
powered device (PD).
NOTE:
The IASO-W10B-N6210 medical panel PC is intended to be used to display
general purpose medical information. The device shall not be used for
diagnosis purpose or life supporting system.

IASO-W10B-N6210 Medical Panel PC
Page 3
1.2 Model Variations
There are two models in the IASO-W10B-N6210 series. All models are preinstalled with
one 4 GB DDR4 memory module and a Wi-Fi 6E module. The model numbers and model
variations are listed below.
CPU
IEEE802.3 PoE
IASO-W10B-N6210/4G
Intel® Celeron® N6210
No
IASO-W10B-N6210/4G/PoE
Intel® Celeron® N6210
Yes
Table 1-1: Model Variations
1.3 Features
The IASO-W10B-N6210 features are listed below:
Compact fanless medical-grade panel PC for easy installation
P-CAP touchscreen with 10-point multi-touch and optical bonding
Intel® Celeron® Processor N6210 platform
Preinstalled with 4 GB of DDR4 memory
Programmable LED light bars on both sides
One HDMI output port supports an additional display
One GbE RJ-45 (1.5kV isolated connector) with optional PoE
Wi-Fi 6E high efficiency wireless
Two internal speakers
Two USB 3.2 Gen 1 (5Gb/s) ports
One RS-232 DB-9
RFID (NFC) reader (optional)

IASO-W10B-N6210 Medical Panel PC
Page 4
1.4 Front Panel
The front side of the IASO-W10B-N6210 is a flat-bezel panel with a 10.1" LCD screen
surrounded by an ABS/PC plastic frame. The LED bars on both sides of the front panel
are user programmable in color and frequency. A digital microphone is located on the top
frame. The bottom right surface contains an optional RFID reader.
Figure 1-2: Front View

IASO-W10B-N6210 Medical Panel PC
Page 5
1.5 Bottom Panel
The bottom panel of the IASO-W10B-N6210 has the following connectors and
components (Figure 1-3):
1 x 12 V DC input jack (standard)
1 x HDMI output connector
1 x 1GbE RJ-45 (1.5kV isolated) supporting PoE
1 x RS-232 DB-9 serial port
2 x USB 3.2 Gen 1 connector (5Gb/s)
1 x Audio-out connector
1 x Power button
1 x Reset button
1 x Clear CMOS button
1 x AT/ATX power mode switch
Figure 1-3: Bottom Panel

IASO-W10B-N6210 Medical Panel PC
Page 6
1.6 Rear Panel
The rear panel contains two internal speakers, and four retention screw holes that support
VESA 75 mount (Figure 1-4).
Figure 1-4: Rear View

IASO-W10B-N6210 Medical Panel PC
Page 7
1.7 System Specifications
The technical specifications for the IASO-W10B-N6210 systems are listed below.
LCD and Touchscreen
LCD Size
10.1”
Max. Resolution
1280 (W) x 800 (H)
Brightness (cd/m2)
400
Contrast Ratio
800:1
LCD Color
16.7M RGB 6-bit (Hi-FRC)
Pixel Pitch (mm)
0.1695 (H) x 0.1695 (V)
Viewing Angle (H-V)
178°/178°
Backlight MTBF
30,000 hrs (LED backlight)
Touchscreen
Projected capacitive type with optical bonding
Multi-touch
10-point touch
Touch Controller
EETI
Surface Hardness
6H
System
CPU
Intel® Celeron® N6210 (code-named Elkhart Lake, 6.5W TDP)
Memory
Preinstalled with 4 GB DDR4 SO-DIMM
GbE Controller
Intel® I225 Ethernet controller
Wi-Fi and Bluetooth
IEEE 802.11ax 2T2R (Wi-Fi 6E)
Bluetooth v5.0 (via M.2 2230 AE key)
I/O Ports & Buttons
1 x 12V DC input jack
1 x HDMI output
1 x 1GbE LAN (RJ-45, 1.5kV isolated) supporting PoE
1 x RS-232 (DB-9)
2 x USB 3.2 Gen 1 (5Gb/s)
1 x Audio jack (TRRS)

IASO-W10B-N6210 Medical Panel PC
Page 8
1 x Reset button
1 x Clear CMOS button
1 x Power button
1 x AT/ATX power mode switch
Storage
1 x M.2 2242 M-key slot (PCIe & SATA signal)
Audio
AMP 1W + 1W (internal speaker)
Microphone
1 x Digital microphone
RFID
Mifare RFID reader, 13.56MHz (optional)
Physical
Construction Material
Front bezel: PC plastic
Rear cover: ABS+PC plastic (ENH2900)
Mounting
Wall, stand and arm
VESA 75 mm x 75 mm
Dimensions (W x H x D)
261 mm x 196.4 mm x 40 mm
Weight (Net/Gross)
1.49 kg / 2.86 kg
Environment
Storage/Transportation
Temperature
-20ºC - 60ºC
Humidity
10% - 95% (non-condensing)
Pressure
700 hPa - 1060 hPa
Operating
Temperature
0ºC - 40ºC
Humidity
10% - 95% (non-condensing)
Pressure
700 hPa - 1060 hPa
Vibration
1G
Shock
Operating Shock: 5G peak acceleration (11ms duration)
Non-Operating Shock: 15G peak acceleration (11ms duration)
IP Level
IP 65 compliant front panel
Thermal
Fanless

IASO-W10B-N6210 Medical Panel PC
Page 9
EMC & Safety
CE, FCC Class B Part18
EN 60601-1:2006/A1:2013 (Edition 3.1)
EN 60601-1-2: 2015 (Edition 4.0)
Power
Power Input
12 V DC
Power Adapter
65 W FSP FSP065-DHBM1 medical-grade power adapter
(P/N: 63040-010065-300-RS)
Input: 100 V AC - 240 V AC, 50 Hz - 60 Hz, 2.0 A – 1.0 A
Output: 12 V 5.42 A
Table 1-2: System Specifications

IASO-W10B-N6210 Medical Panel PC
Page 10
1.8 Dimensions
The IASO-W10B-N6210 dimensions are shown below.
Figure 1-5: Dimensions (mm)

IASO-W10B-N6210 Medical Panel PC
Page 11
2Unpacking
Chapter
2

IASO-W10B-N6210 Medical Panel PC
Page 12
2.1 Unpacking
To unpack the medical panel PC, follow the steps below:
WARNING / AVERTISSEMENT
The front side LCD screen has a protective plastic cover stuck to the
screen. Only remove the plastic cover after the medical panel PC has been
properly installed. This ensures the screen is protected during the
installation process.
L'écran LCD avant a un couvercle en plastique de protection collé à l'écran.
Retirez le couvercle en plastique uniquement une fois que le Panel PC
médical a été correctement installé. Cela garantit que l'écran est protégé
pendant le processus d'installation.
Step 1: Use box cutters, a knife or a sharp pair of scissors that seals the top side of the
external (second) box.
Step 2: Open the external (second) box.
Step 3: Use box cutters, a knife or a sharp pair of scissors that seals the top side of the
internal (first) box.
Step 4: Lift the panel PC out of the boxes.
Step 5: Remove both polystyrene ends, one from each side.
Step 6: Pull the plastic cover off the medical panel PC.
Step 7: Make sure all the components listed in the packing list are present.
Step 0: