
5
UK
When operated correctly, the system can be used in applications up to the
Performance Level e according to EN ISO 13849-1 or IEC 61508/SIL3 (see notes
Electrical connection).
Depending on the safety components used the complete safety system can
also be classified for a lower control category!
5 Function and electrical connection
Please refer to all information in the description of the configuration software (e�g�
E7050S) and the installation instructions of the unit. These documents provide
all required instructions concerning installation, configuration, operation and
maintenance of the compact AS-i E-STOP safety module�
Information on the parameterizable safety functions of the compact AS-i E-STOP
safety module can be found in the chapter "Monitoring devices" (two positively
guided NC contacts) of the configuration software manual.
The products described herein are designed to be components of a safety-
oriented machine or control system� A complete safety-related system
normally includes sensors, evaluation units, signalling components and
concepts for safe switch-off� It is the responsibility of each manufacturer of a
machine or installation to ensure a correct functioning of the whole system�
The manufacturer of the safe AS-i module, his subsidiaries and affiliates are
not in a position to evaluate all of the characteristics of a given machine or
product not designed by him�
The manufacturer accepts no liability for any recommendation that may be implied
or stated herein�
The warranty contained in the contract of sale is the sole warranty� Any statements
contained herein do not create new warranties or modify existing ones�
Compliance with the description of the configuration software and with the
operating instructions of the AS-i safety monitor and compact AS-i E-STOP safety
module is mandatory!