Ignition 2bright Blind 3K User manual

2bright Blind 3K
blinder
User manual

Musikhaus Thomann
Thomann GmbH
Hans-Thomann-Straße 1
96138 Burgebrach
Germany
Telephone: +49 (0) 9546 9223-0
E-mail: [email protected]
Internet: www.thomann.de
05.08.2020, ID: 480071

Table of contents
1 General information................................................................................................................................. 6
1.1 Further information........................................................................................................................... 7
1.2 Notational conventions.................................................................................................................... 8
1.3 Symbols and signal words............................................................................................................... 8
2 Safety instructions.................................................................................................................................. 11
3 Features....................................................................................................................................................... 16
4 Installation.................................................................................................................................................. 18
5 Starting up.................................................................................................................................................. 22
6 Connections and controls................................................................................................................... 25
7 Operating.................................................................................................................................................... 28
7.1 Starting the device........................................................................................................................... 28
7.2 Operating on the unit..................................................................................................................... 28
7.3 Menu overview................................................................................................................................. 38
7.4 Functions in 1-channel mode...................................................................................................... 39
7.5 Functions in 2-channel mode 1.................................................................................................. 39
Table of contents
2bright Blind 3K 3
blinder

7.6 Functions in 2-channel mode 2.................................................................................................. 40
7.7 Functions in 3-channel mode...................................................................................................... 40
7.8 Functions in 6-channel mode...................................................................................................... 41
8 Technical specications....................................................................................................................... 43
9 Plug and connection assignment.................................................................................................... 45
10 Cleaning....................................................................................................................................................... 46
11 Protecting the environment.............................................................................................................. 47
Table of contents
42bright Blind 3K
blinder

2bright Blind 3K 5
blinder

1 General information
This user manual contains important information on the safe operation of the device. Read and
follow all safety notes and all instructions. Save this manual for future reference. Make sure
that it is available to all persons using this device. If you sell the device to another user, be sure
that they also receive this manual.
Our products and user manuals are subject to a process of continuous development. We there‐
fore reserve the right to make changes without notice. Please refer to the latest version of the
user manual which is ready for download under www.thomann.de.
General information
62bright Blind 3K
blinder

1.1 Further information
On our website (www.thomann.de) you will nd lots of further information and details on the
following points:
Download This manual is also available as PDF le for you to download.
Keyword search Use the search function in the electronic version to nd the topics of
interest for you quickly.
Online guides Our online guides provide detailed information on technical basics
and terms.
Personal consultation For personal consultation please contact our technical hotline.
Service If you have any problems with the device the customer service will
gladly assist you.
General information
2bright Blind 3K 7
blinder

1.2 Notational conventions
This manual uses the following notational conventions:
The letterings for connectors and controls are marked by square brackets and italics.
Examples: [VOLUME] control, [Mono] button.
Texts and values displayed on the device are marked by quotation marks and italics.
Examples: ‘24ch’ , ‘OFF’ .
1.3 Symbols and signal words
In this section you will nd an overview of the meaning of symbols and signal words that are
used in this manual.
Letterings
Displays
General information
82bright Blind 3K
blinder

Signal word Meaning
DANGER! This combination of symbol and signal word indicates an
immediate dangerous situation that will result in death or
serious injury if it is not avoided.
WARNING! This combination of symbol and signal word indicates a pos‐
sible dangerous situation that can result in death or serious
injury if it is not avoided.
NOTICE! This combination of symbol and signal word indicates a pos‐
sible dangerous situation that can result in material and
environmental damage if it is not avoided.
Warning signs Type of danger
Warning – high-voltage.
Warning – dangerous optical radiation.
General information
2bright Blind 3K 9
blinder

Warning signs Type of danger
Warning – suspended load.
Warning – danger zone.
General information
10 2bright Blind 3K
blinder

2 Safety instructions
This device is intended for use as an electronic lighting eect by means of LED technology. The
device is designed for professional use and is not suitable for use in households. Use the
device only as described in this user manual. Any other use or use under other operating con‐
ditions is considered to be improper and may result in personal injury or property damage. No
liability will be assumed for damages resulting from improper use.
This device may be used only by persons with sucient physical, sensorial, and intellectual
abilities and having corresponding knowledge and experience. Other persons may use this
device only if they are supervised or instructed by a person who is responsible for their safety.
Extend the life of the device by regular breaks in operation and avoid switching it on and o
frequently. This device is not suitable for continuous use.
Intended use
Safety instructions
2bright Blind 3K 11
blinder

DANGER!
Danger for children
Ensure that plastic bags, packaging, etc. are disposed of properly and are not
within reach of babies and young children. Choking hazard!
Ensure that children do not detach any small parts (e.g. knobs or the like) from
the unit. They could swallow the pieces and choke!
Never let children unattended use electrical devices.
DANGER!
Electric shock caused by high voltages inside
Within the device there are areas where high voltages may be present. Never
remove any covers.
There are no user-serviceable parts inside.
Do not use the device if covers, protectors or optical components are missing or
damaged.
Safety
Safety instructions
12 2bright Blind 3K
blinder

DANGER!
Electric shock caused by short-circuit
Always use proper ready-made insulated mains cabling (power cord) with a pro‐
tective contact plug. Do not modify the mains cable or the plug. Failure to do so
could result in electric shock/death or re. If in doubt, seek advice from a regis‐
tered electrician.
WARNING!
Eye damage caused by high light intensity
Never look directly into the light source.
WARNING!
Risk of epileptic shock
Strobe lighting can trigger seizures in photosensitive epilepsy. Sensitive persons
should avoid looking at strobe lights.
Safety instructions
2bright Blind 3K 13
blinder

NOTICE!
Risk of re
Do not block areas of ventilation. Do not install the device near any direct heat
source. Keep the device away from naked ames.
NOTICE!
Power supply
Before connecting the device, ensure that the input voltage (AC outlet) matches
the voltage rating of the device and that the AC outlet is protected by a residual
current circuit breaker. Failure to do so could result in damage to the device and
possibly injure the user.
Unplug the device before electrical storms occur and when it is unused for long
periods of time to reduce the risk of electric shock or re.
Safety instructions
14 2bright Blind 3K
blinder

NOTICE!
Fire hazard due to exceedance of the maximum current
The device can power other devices via a lockable Power Twist output socket. The
current consumption of all serially connected other devices must not exceed 16
A, otherwise you risk injuries and irreparable damages of the device.
Connect just so many devices to the output socket that the maximum current
consumption is not exceeded.
Ensure the correct dimensioning (wire cross section) of the used power cords of
all serially connected devices.
Safety instructions
2bright Blind 3K 15
blinder

3 Features
The LED-Blinder imitates the dimming and response behaviour and the typical afterglow of a
conventional blinder.
Special features of the device:
n2 × COB LED, each 100 W
nColour temperature: 3000 K
nLarge beam angle with even light spread
nLuminaire can be horizontally angled
nLEDs individually controllable
nControl via DMX or via buttons and display on the unit
nStrobe eect
nRemovable frost lter for soft blind eects
nFour dimmer curves
nSilent operation
nProtection class IP65
nQuick-Lock bracket for vertical and horizontal positioning
Features
16 2bright Blind 3K
blinder

Equipment with protection class IP65 are dust-tight and completely protected against contact
(rst code number). They are also protected against splash water from any angle (second code
digit). That is why this equipment can also be used outdoors. Event technology equipment is
generally only designed for temporary use however (event lighting) and not for permanent
use outdoors.
The specied protection class does not make a statement about the weather resistance of the
equipment (resistance to changing ambient conditions as well as against the eects of sun‐
light and UV rays).
The seals and screw connections of the equipment must be checked regularly to ensure a
fault-free operation. In cases of doubt, consult a specialist workshop in due time.
For technological reasons, the light output of LEDs decreases over their lifetime. This eect
increases with higher operating temperature. You can extend the service life of the illuminants
by providing adequate ventilation and operating the LEDs with the lowest possible brightness.
Information about protection
class IP65
Features
2bright Blind 3K 17
blinder

4 Installation
Unpack and check carefully there is no transportation damage before using the unit. Keep the
equipment packaging. To fully protect the product against vibration, dust and moisture during
transportation or storage use the original packaging or your own packaging material suitable
for transport or storage, respectively.
WARNING!
Risk of injury caused by falling objects
Make sure that the installation complies with the standards and rules that apply
in your country. Always secure the device with a secondary safety attachment,
such as a safety cable or a safety chain.
Installation
18 2bright Blind 3K
blinder

NOTICE!
Risk of overheating
Always ensure sucient ventilation.
The ambient temperature must not exceed the limits stated in the chapter Tech‐
nical Specications of the User Manual.
NOTICE!
Use of stands
When mounting the device onto a stand, ensure that the stand is in a safe and
stable position and that the weight of the device does not exceed the maximum
permissible load capacity of the stand.
Installation
2bright Blind 3K 19
blinder

NOTICE!
Possible data transmission errors
For error-free operation make use of dedicated DMX cables and do not use ordi‐
nary microphone cables.
Never connect the DMX input or output to audio devices such as mixers or ampli‐
ers.
NOTICE!
Possible damage due to moisture
Moisture entering into open connectors (plugs and couplers) of DMX or power
cords can cause short circuits.
Close unused connectors with end caps intended for this purpose
(www.thomann.de).
Installation
20 2bright Blind 3K
blinder
Other manuals for 2bright Blind 3K
1
Table of contents
Other Ignition Lighting Equipment manuals

Ignition
Ignition Tristan 200 User manual

Ignition
Ignition WAL-L310 Par User manual

Ignition
Ignition LED PAR 56 Floor WCA 36x1W User manual

Ignition
Ignition Stagepix Line 100 IP User manual

Ignition
Ignition Airbase 850 MK2 User manual

Ignition
Ignition WAL-L Z150 COB RGBW User manual

Ignition
Ignition PAR 56 SHORT FLOOR 15X3W PWM RGB User manual

Ignition
Ignition Air Base 600 with protective cover User manual

Ignition
Ignition Gawan 200 User manual

Ignition
Ignition RGBAW User manual