INDIWORK BMW Easy Access User manual

BMW Easy Access Seats
Release Date: 2014 - 05 -08
Components
Save the seat position
1
Module POWER / CAN Cable
Dip Switch Settings
OFF
ON
ON: ▼OFF: ▲
No.1 No.2 No.3 No.4 No.5 No.6 Car Models
OFF(▲) OFF(▲) OFF(▲) OFF(▲) OFF(▲) OFF(▲)1, 3, 4 Series(F20, F30, F32)
ON(▼)OFF(▲) OFF(▲) OFF(▲) OFF(▲) OFF(▲)5 Series(F10) *6-Pin LVDS(2013+)
OFF(▲)ON(▼)OFF(▲) OFF(▲) OFF(▲) OFF(▲)5 Series(F10) *4-Pin LVDS(-2012)
Version Information
Model Name BMW Easy Access
Latest Firmware Date 2014 -05 -08
Manual Version Rev. 1.0
Manual Release Date 2014 -05 -08
Easy Access ‘ON-OFF’ Settings
Button Operation
Push to the Left(◁)Push the dial to the left 5 times,
quickly.
8
7
6
5
4
3
2
1
IN CAN H
IN CAN L
BMW-F30 4th PIN
BMW-F30 7th PIN
BAT +
GROUND
ⓐ ⓑ
Button Function
Memory No.2(ⓐ)Save a comfortable position of the
seat, when you get out of the car.
Memory No.1(ⓑ)Save a comfortable position of the
seat, when you get in the car.
Driver's seat is moved between position No.1 and position
No.2 automatically, when you turn on or turn off the ignition.
Connector Specification
AUDI KEY IN
AUDI KEY OUT
(Only for BMW 1, 3, 4 Series)
(Only for AUDI)

Installation Manual
BMW Easy Access Seats
5 Series(F10) 2013+(6-Pin LVDS)
Release Date: 2014 - 05 -08
2

1) Remove the glovebox under cover. 2) Unplug the ’54-pin connector(Light Blue)’ of fuse box.
※CAUTION ※
You have to unplug the connector after turn off the ignition.
3

3) Splice the ‘IN CAN H(No.3 / White) wire’ to
‘No.1 wire(Yellow/Red)’ of the 54-pin connector.
< CAN HIGH connection >
4) Splice the ‘IN CAN L(No.4 / Green) wire’ to
‘No.2 wire(Yellow/Brown)’ of the 54-pin connector.
< CAN LOW connection >
1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8
4

5) Remove the relay in front of fuse box.
(Rotate it counterclockwise.)
5
Fixing Pin
(Engine room direction)
6) Splice the ‘BAT+(No.1 / Yellow) wire’ to
‘Red wire in the direction of the engine room(Battery power)’.
< No.2(GROUND)wire should be connected with ground of the car.>
1 2 3 4 5 6 7 8