INDIWORK IW03LX User manual

Instruction Manual
High-Definition Link for Lexus
IW03LX
Model Name IW03LX
Latest Firmware Date 2016 -09 -06
Manual Version Rev. 3.9
Language English
Release Date: 2016 - 12 -30

•Cautions
•Dimension & Exterior
•Components & Optional Parts
•Full Installation Diagram
•HDMI ConnectionDiagram
•Navigation Connection Diagram(Type B)
•Compatibility Chart for Navigation(GPS) Box Models
•GVIF IN / OUT Connection Diagram
•Body ConnectorSpecifications
•Car Compatibility Chart
•Activation by Original buttons
•DIP Switch Settings
______________________________________________________________ 3
__________________________________________________ 4
__________________________________________ 5
_______________________________________________ 6
_____________________________________________ 7
________________________________ 8
____________________ 9
____________________________________ 10
________________________________________ 11
_______________________________________________ 12
_________________________________________ 13
___________________________________________________ 14
Contents

3
IW03LX-related
•You should check the names and colors of each wires exactly, before you connect the wires.
ex) CAN HIGH: White wires / CAN LOW: Blue wires
• The ‘POWER / CAN Cable’ should always be connected last and be disconnected first.
•The 'Mode Switch' is an optional part to change modes forcibly without CAN-BUS.
Generally, the CAN-BUSwires are connected for changing modes by original buttons.
•When the reverse gear is not detected by CAN-BUS,
the 'REVERSE12V IN wire’ should be spliced with 12V power of reverse light.
HDMI device-related
•HDMI mode accepts general-screen resolution of HDMI devices(1080P / 1920*1080).
•Generally, '5V 1A Power output(5V USB POWER)' is a standard voltage for charging smartphone.
If you need higher voltage than 5V, you should add a separate power supply.
Navigation(GPS) box-related
•When you connect the power wires(B+, ACC) to the navigation(GPS) box,
the ‘NAVI (12V) OUT' wire supported by IW03LX should be spliced with an ACC wire of navigation box.
•The navigation box should be powered off before unplugging the HDMI cable.
Cautions

4
ⓐ ⓑ ⓒ ⓓ ⓔ
ⓕ ⓖ ⓗ ⓘ ⓙ
Width:142 mm
Length: 91 mm
Height: 22 mm
Exterior
Dimension
ⓐ
DIP SWITCH
ⓑ
AV IN / OUT
ⓒ
TOUCH IN
(Not Used)
ⓓ
MODE
ⓔ
POWER/ CAN
ⓕ
HDMI IN
ⓖ
5V USB POWER
ⓗ
NAVI IN
ⓘ
UART I/F
ⓙ
LVDS OUT

5
POWER / CAN Cable GVIF-IN Cable GVIF PCB HDMI Cable
(For GVIF) AV IN / OUT Cable 5-Pin Micro USB Cable
Mode SwitchHDMI Extender
(For stick type HDMI device)
HDMI Cable
(Male to Male)
GVIF-OUT Cable
Components
Optional Parts(sold separately at the indiwork)

External Rear View
Camera
Audio(AUX) Output of
Navigation Box
Auxiliary(AUX)
Input of the car
External Front View
Camera
AV device
(ex: DTV Box, Divx)
NAVI 12V Power Output(NAVI 12V OUT)
AUDIO-KEYCAN Hi(White)
*OEM Monitor –24-Pin Connector
Pin # 2 = ‘Blue’ Wire *Cut!!
Pin # 1 = Battery Power(B+ / Red)
Pin # 13 = ACC Power(Yellow)
Pin # 24 = Ground(GND / White/Black)
Ground Input(GROUND)
Battery Power Input(BAT +)
HDMI
HDMI
HDMI USB
6
GVIF IN / OUT Connection
Monitor(OEM)
AUDIO-KEYCAN Lo(Blue)
GVIF
IN / OUT
PCB
HDMI
1 5 6 14
15 28
1 2 12
13 24
(OEM GVIF Cable)
HDMI
HDMI
*Head Unit(OEM) –24-Pin Connector
Pin # 5 = CAN LOW (White)
Pin # 6 = CAN HIGH (Light Brown)
※Cut the genuine No.2 wire(Blue)!
*24-Pin Connector
Pin # 2 = Blue Wire
Full Installation Diagram
※Optional External Devices
Navigation Box
HDMI Device
AV-Input(AV2)
FV-CAM Video Input
(AV1)
NAVI Audio Input
Audio Output
RV-CAM Video Input
DIP S/W Setting
12V Power Output & GNDOutput(RV-CAM Power)
ReverseSignal Detection(optional)
Mode
Switch
(optional)
USB
USB

HDMI
HDMI
(Female)
USB
‘Stick Type’ HDMI Devices
HDMI IN 5V USB
POWER NAVI IN UART I/F LVDS OUT
HDMIDevice
HDMI IN 5V USB
POWER NAVI IN UART I/F LVDS OUT
HDMIDevice
USB
HDMI
HDMI
(Male)
‘Dongle & Adapter’ Type HDMI Devices
HDMI Connection Diagram
(5V-1A Power output for HDMI Device) (5V-1APower output for HDMIDevice)
7
(HDMIExtender) (HDMICable)

HDMI IN 5V USB
POWER NAVI IN UART I/F LVDS OUT HDMI IN 5V USB POWER NAVI IN UART I/F LVDS OUT
8
HDMI Touch Screen Panel
HDMI
Navigation Connection Diagram(Type B)
Navigation(GPS) Box Navigation(GPS) Box
HDMI
HDMI
Touch screen panel
USB
USB
(USB Cable is connected with the ‘N-Link’, only)
MICROCITY - N-LinkI-NAVI X1 CUBE

Model Country Dip S/W
(Navigation) Required Parts
MICROCITY
N-Link South Korea -
HDMI Cable
(HDMI to HDMI) USB A-A Cable (USB to USB)
MYVI
MS1400 Digital South Korea
OFF(↓): 1, 2, 3
ON(↑) : 4 HDMI Cable (HDMI to HDMI)
iNAVI
X1 CUBE South Korea
OFF(↑): 1, 2, 3, 4 HDMI Cable
(HDMI to HDMI)
9
1 2 3 4
ON
↑
Compatibility Chart for Navigation(GPS) box models
•The 'IW03LX(HD-Link)' supports navigation(GPS) box models equipped with 'Digital video output'.
•It does not support the 'RGB video signals'.
1 2 3 4
OFF
↓
ON

(Provided GVIF OUT Cable)
HDMI
HDMI
‘Display Audio’ Head Unit(OEM)
HDMI IN 5V USB
POWER NAVI IN UART I/F LVDS OUT
GVIF
IN / OUT
PCB
LCD
Cable
(OEM GVIF Cable)
10
(Provided GVIF IN Cable)
Monitor(OEM)
GVIF Connection Diagram
GVIF Connection
•'Genuine(OEM) GVIF Connector' should be connected
to ‘GVIF IN Connector'.
• ‘Provided GVIF OUT Connector' should be connected to
the OEM monitor instead to the genuine connector.

POWER / CAN MODE TOUCH-IN AV IN / OUT DIP SWITCH
1234 5 6 7 8 9 10 11
12 13 14 15 16 17 18 19 20 21 22
1 BATTERY POWER INPUT
2 GND INPUT
3 NAVI 12V POWER OUTPUT
4
5 AUDIO-KEY CAN HIGH
6 AUDIO-KEY CAN LOW
7
8
9
10
AUDIO-KEY CAN H
AUDIO-KEY CAN L
BAT +
GROUND
NAVI 12V OUT
1RV-CAM VIDEO INPUT
12
GND(RV-CAM VIDEO)
2RV-CAM POWER OUT
13
GND OUTPUT(RV-CAM)
3 REVERSE DETECTION
14
IR OUT
4 NAVI AUX INPUT R
15
GND(NAVI AUX IN R)
5 NAVI AUX INPUT L
16
GND(NAVI AUX IN L)
6 AUDIO OUTPUT R
17
GND(AUDIO OUT R)
7 AUDIO OUTPUT L
18
GND(AUDIO OUT L)
8 AV1 VIDEO INPUT
19
GND(AV1 VIDEO IN)
9 AV2 VIDEO INPUT
20
GND(AV2 VIDEO IN)
10
AV2 AUDIO INPUT R
21
GND(AV2 AUDIO IN R)
11
AV2 AUDIO INPUT L
22
GND(AV2 AUDIO IN L)
GROUND
IR OUT
REVERSE 12V IN
REAR 12V
REAR CAMERA
NAVI AUD IN R
NAVI AUD IN L
AUDIO OUT R
AUDIO OUT L
AV1 IN V
AV2 IN V
AV2 IN R
AV2 IN L
Mode Switch
1
2
11
Length: 100 cm Length: 20 cm
Length: 150 cm
12 3 4 5 67 8 9 10
Body Connector specifications
•The colors of each wires can be changed under manufacturer’s circumstance.

Car Models Production
Year Specific Models
ES 300h 2014 - XV60
ES 350 2014 - XV60
CT 200h 2014 - A10
IS 250 2014 - XE30 The IW03LX is used in combination with
Lexus DISPLAY AUDIO SYSTEM.
- ES 300h PREMIUM (8-inch)
- ES 350 PREMIUM (8-inch)
- CT 200h SUPREME (7-inch)
-IS 250 PREMIUM (7-inch)
The IW03LXsupports the
Lexus
original screen & Head unit
equipped with ‘GVIF
connector’ only.
Please check the specification of
original GVIF connector on the
sidelines of a production year.
12
Car Compatibility Chart

1
Button Function Operation Remarks
DISP
Changing
Modes Press the button 2 seconds long. Order:HDMI→NAVI →AV1 → AV2 →OEM
DISP
Shortcut to
Each Modes
Press the button 2 times quickly. < OEM → NAVI >
Press the button 3 times quickly. < OEM → AV1 >
Press the button 4 times quickly. < OEM → AV2 >
DISP Back to OEM Press the buttonshort. Return to the OEM mode in any modes..
DISP
Reset to factory
default setting
and power.
Press the button 10 seconds
long.
You can use this function when you get in
trouble to see the screen while setting the
screen.
※Not available the setting mode on Lexus vehicles.
1
13
Steering wheel buttons
1
1
※IS 250: Unable to use the OEM button / Please use the ‘Mode Switch’
1
Activation by original buttons

Pin
No. ON(▼) OFF(▲)
1 HDMI Mode Skip HDMI Mode
2 Navigation Mode Skip Navigation Mode
3 External Rear View Camera Original Rear View Camera
4External Front View
Camera(AV1 Mode) Skip External Front View Camera(AV1 Mode)
5AV2 Mode Skip AV2 Mode
6PAS LINE OFF PAS LINE ON
7
Selection of car model
8
9
10
14
OFF
ON ON: ▼OFF:▲
No.6 No.7 No.8 No.9 No.10 Car Models
OFF(
▲
)
OFF(
▲
)
OFF(
▲
)
OFF(
▲
)
OFF(
▲
)
ES 300h, CT 200h, IS 250
OFF(
▲
)
OFF(
▲
)
OFF(
▲
)
ON(▼)
OFF(
▲
)
ES 300h
(HDMIscreenblinking resolved)
OFF(
▲
)
OFF(
▲
)
OFF(
▲
)
ON(▼) ON(▼)2011 CT 200h (7 inch /
800*480)
OFF(
▲
)
OFF(
▲
)
ON(▼) ON(▼)
OFF(
▲
)
2016~ES300h(Pioneer
LCD)
DIP Switch Settings

Copyright ⓒindiwork.All Rights Reserved.