INDIWORK IW03C-EQ-D User manual

Instruction Manual
High-Denition Link for Chevrolet(GM)
Release Date: 2018 – 08 - 22
IW03C-EQ-D
Model Name IW03C-EQ-D
Latest Firmware Date 2018 - 08 - 09
Manual Version Rev. 1.0
Language English
NAVI IN UART I/F LVDS OUTLVDS IN
POWER/CAN MODE AV IN DIP SWITCH
DEBUG
TOUCH
OUT

Contents
Precautions
Car Compatibility Chart
Dimension & Exterior
Components & Optional Parts
Body Connector specications
Full Installation Diagram, DIP Switch Settings
Activation by original buttons
How to Setting , Connect Cable (OEM, External Camera)
Settings (How To Use KEYPAD)
Settings NAVIGATION
Settings REAR VIEW
Settings REAR VIEW
Settings AV1 (FRONT VIEW) (OEM Camera delay time setting)

Precautions
IW03C-EQ-D - related
Navigation(GPS) box - related
You should check the names and colors of each wires exactly, before you connect the wires.
ex) CAN HIGH: White wires / CAN LOW: Blue wires
The ‘POWER / CAN Cable’ should always be connected last and be disconnected rst.
The 'Mode Switch' is an optional part to change modes forcibly without CAN-BUS.
Generally, the CAN-BUS wires are connected for changing modes by original buttons.
When the reverse gear is not detected by CAN-BUS,
the 'REVERSE 12V IN wire’ should be spliced with 1 2V power of reverse light.
The navigation box should be powered o󰀨 before unplugging the HDMI cable.
When you connect the power wires(B+, ACC) to the navigation(GPS) box,
the ‘NAVI 12V OUT' wire supported by IW03C-EQ-D should be spliced with an ACC wire of navigation box.

Car Models Production
Year Specic Modelsv
EQUINOX 2018- My-link 7-inch
EQUINOX (7inch)
Car Compatibility Chart

ANAVI IN EDIP SWITCH
BUART I/F FTOUCH OUT
CLVDS IN GAV IN
DLVDS OUT HDEBUG
IKEY PAD
JPOWER
Dimension
Exterior
Width: 123 mm
Height: 22 mm
Length: 95 mm