Infineon Technologies XMC4500 Relax kit User manual

Microcontroller
Evaluation Board
For XMC4000 Family
Board User‘s Manual
Revision 1.2, 2014-01-13
XMC4500 Relax Kit &
XMC4500 Relax Lite Kit
Kit Version 1

Edition 2014-01-13
Published by
Infineon Technologies AG
81726 Munich, Germany
© 2014 Infineon Technologies AG
All Rights Reserved.
Legal Disclaimer
The information given in this document shall in no event be regarded as a guarantee of conditions or
characteristics. With respect to any examples or hints given herein, any typical values stated herein and/or any
information regarding the application of the device, Infineon Technologies hereby disclaims any and all
warranties and liabilities of any kind, including without limitation, warranties of non-infringement of intellectual
property rights of any third party.
Information
For further information on technology, delivery terms and conditions and prices, please contact the nearest
Infineon Technologies Office (www.infineon.com).
Warnings
Due to technical requirements, components may contain dangerous substances. For information on the types in
question, please contact the nearest Infineon Technologies Office.
Infineon Technologies components may be used in life-support devices or systems only with the express written
approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the
failure of that life-support device or system or to affect the safety or effectiveness of that device or system. Life
support devices or systems are intended to be implanted in the human body or to support and/or maintain and
sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other
persons may be endangered.

XMC4500 Relax Kit-V1
XMC4500 Relax Lite Kit-V1
Template: IFX_Template_2011-02-24.dot
Revision History
Page or Item
Subjects (major changes since previous revision)
Revision 1.0,
2012-11-07
Initial release
Revison 1.1,
2012-11-09
Correction of DAVE™3 trademark
Revison 1.2,
2014-01-13
Notes have been added to Figure 5 (Pins of Pin Header X1 / X2 are partly used also for on-
board circuits)
Trademarks of Infineon Technologies AG
AURIX™, C166™, CanPAK™, CIPOS™, CIPURSE™, EconoPACK™, CoolMOS™, CoolSET™,
CORECONTROL™, CROSSAVE™, DAVE™, EasyPIM™, EconoBRIDGE™, EconoDUAL™, EconoPIM™,
EiceDRIVER™, eupec™, FCOS™, HITFET™, HybridPACK™, I²RF™, ISOFACE™, IsoPACK™, MIPAQ™,
ModSTACK™, my-d™, NovalithIC™, OptiMOS™, ORIGA™, PRIMARION™, PrimePACK™, PrimeSTACK™,
PRO-SIL™, PROFET™, RASIC™, ReverSave™, SatRIC™, SIEGET™, SINDRION™, SIPMOS™,
SmartLEWIS™, SOLID FLASH™, TEMPFET™, thinQ!™, TRENCHSTOP™, TriCore™.
Other Trademarks
Advance Design System™ (ADS) of Agilent Technologies, AMBA™, ARM™, MULTI-ICE™, KEIL™,
PRIMECELL™, REALVIEW™, THUMB™, µVision™ of ARM Limited, UK. AUTOSAR™ is licensed by
AUTOSAR development partnership. Bluetooth™ of Bluetooth SIG Inc. CAT-iq™ of DECT Forum.
COLOSSUS™, FirstGPS™ of Trimble Navigation Ltd. EMV™ of EMVCo, LLC (Visa Holdings Inc.). EPCOS™
of Epcos AG. FLEXGO™ of Microsoft Corporation. FlexRay™ is licensed by FlexRay Consortium.
HYPERTERMINAL™ of Hilgraeve Incorporated. IEC™ of Commission Electrotechnique Internationale. IrDA™
of Infrared Data Association Corporation. ISO™ of INTERNATIONAL ORGANIZATION FOR
STANDARDIZATION. MATLAB™ of MathWorks, Inc. MAXIM™ of Maxim Integrated Products, Inc.
MICROTEC™, NUCLEUS™ of Mentor Graphics Corporation. Mifare™ of NXP. MIPI™ of MIPI Alliance, Inc.
MIPS™ of MIPS Technologies, Inc., USA. muRata™ of MURATA MANUFACTURING CO., MICROWAVE
OFFICE™ (MWO) of Applied Wave Research Inc., OmniVision™ of OmniVision Technologies, Inc.
Openwave™ Openwave Systems Inc. RED HAT™ Red Hat, Inc. RFMD™ RF Micro Devices, Inc. SIRIUS™ of
Sirius Satellite Radio Inc. SOLARIS™ of Sun Microsystems, Inc. SPANSION™ of Spansion LLC Ltd.
Symbian™ of Symbian Software Limited. TAIYO YUDEN™ of Taiyo Yuden Co. TEAKLITE™ of CEVA, Inc.
TEKTRONIX™ of Tektronix Inc. TOKO™ of TOKO KABUSHIKI KAISHA TA. UNIX™ of X/Open Company
Limited. VERILOG™, PALLADIUM™ of Cadence Design Systems, Inc. VLYNQ™ of Texas Instruments
Incorporated. VXWORKS™, WIND RIVER™ of WIND RIVER SYSTEMS, INC. ZETEX™ of Diodes Zetex
Limited.
Last Trademarks Update 2011-02-24

XMC4500 Relax Kit-V1
XMC4500 Relax Lite Kit-V1
Table of Contents
Board Users Manual 4 Revision 1.2, 2014-01-13
Table of Contents
Introduction............................................................................................................................................................7
1Overview .............................................................................................................................................7
1.1 Key Features........................................................................................................................................7
1.2 Block Diagram......................................................................................................................................8
2Hardware Description........................................................................................................................9
2.1 Power Supply.....................................................................................................................................11
2.2 Pin Header Connector........................................................................................................................12
3Production Data................................................................................................................................14
3.1 Schematics.........................................................................................................................................14
3.2 Components Placement and Geometry.............................................................................................17
3.3 List of Material....................................................................................................................................18

XMC4500 Relax Kit-V1
XMC4500 Relax Lite Kit-V1
List of Figures
Board Users Manual 5 Revision 1.2, 2014-01-13
List of Figures
Figure 1 Block Diagram of the XMC4500 Relax/Relax Lite Kit-V1.....................................................................8
Figure 2 XMC4500 Relax Lite Kit-V1 .................................................................................................................9
Figure 3 XMC4500 Relax Kit-V1 ......................................................................................................................10
Figure 4 Power Supply Concept.......................................................................................................................11
Figure 5 Signal mapping of the pin headers.....................................................................................................12
Figure 6 Mapping of communication peripherals to GPIOs and it’s corresponding functions .........................13
Figure 7 CPU, Pin Headers, Buttons, LEDs, Reset .........................................................................................15
Figure 8 On-board Debugger, Power Supply, Ethernet, Quad-SPI Memory, SD Card Slot, RTC Crystal ......16
Figure 9 Components Placement and Geometry.............................................................................................17

XMC4500 Relax Kit-V1
XMC4500 Relax Lite Kit-V1
List of Tables
Board Users Manual 6 Revision 1.2, 2014-01-13
List of Tables
Table 1 Features ...............................................................................................................................................7
Table 2 List of Material....................................................................................................................................18

XMC4500 Relax Kit-V1
XMC4500 Relax Lite Kit-V1
Overview
Board Users Manual 7 Revision 1.2, 2014-01-13
Introduction
This document describes the features and hardware details of the XMC4500 Relax Kit-V1 and the XMC4500
Relax Lite Kit-V1, both equipped with the ARM® Cortex™-M4 based XMC4500 Microcontroller from Infineon
Technologies AG.
1 Overview
The XMC4500 Relax Kit-V1 and the XMC4500 Relax Lite Kit-V1 are designed to evaluate the capabilities of the
XMC4500 Microcontroller and the powerful, free of charge tool chain DAVE™. The XMC4500 Relax Kit extends
the feature set with an Ethernet-enabled communication option, e.g. to run an embedded web server. You can
store your own HTML web pages on a microSD Card or control the XMC4500 via the web browser on your PC.
The XMC4500 Relax Lite Kit-V1 does not support the web server application, because the components for the
Ethernet are not assembled. Both boards are marked with “XMC4500 Relax/Relax Lite Kit-V1”. These boards
are neither cost nor size optimized and do not serve as a reference design.
1.1 Key Features
Table 1 summarizes the features of both the XMC4500 Relax Kit-V1 and the XMC4500 Relax Lite Kit-V1.
Table 1 Features
Feature
XMC4500 Relax Kit-V1
XMC4500 Relax Lite Kit-V1
XMC4500 Microcontroller
(ARM® Cortex™-M4F based)
Detachable on-board Debugger
Power over USB
2 x User Button and 2 x User LED
Reset Button
Power Regulator from 5 V to 3.3V
4 x SPI-Master, 3x I2C, 3 x I2S, 3 x UART,
2 x CAN, 17 x ADC (12 bit), 2 x DAC,
31x PMW mapped on 2 Pin Headers 2 x 20
USB-OTG (Micro USB Plug)
Ethernet PHY and RJ45 jack
Real Time Clock Crystal
32 Mbit Quad-SPI Flash Memory
microSD Card Slot

XMC4500 Relax Kit-V1
XMC4500 Relax Lite Kit-V1
Overview
Board Users Manual 8 Revision 1.2, 2014-01-13
1.2 Block Diagram
The block diagram in Figure 1 shows the main components of the XMC4500 Relax/Relax Lite Kit-V1 and their
interconnections. There are following main building blocks:
XMC4500 Microcontroller in a LQFP100 package
On-board USB debugger realized with a 2nd XMC4500 for serial wire debug
Ethernet Phy with RJ45 Plug
Two 40 pin header X1 and X2
On-board power generation for power supply of the XMC45000 Microcontroller and the debug IC
2 User Buttons and 2 User LEDs
USB Plug
microSD Card Slot
Figure 1 Block Diagram of the XMC4500 Relax/Relax Lite Kit-V1
XMC4500
Microcontroller
U0C0
ETH
USB Debug,
U1C1
SDMMC OCS
EVRRTC
SD/MMC
12 MHz
Crystal
32.768
kHz
Micro
USB
micro
SD
qSPI
Flash
BUTTON2
ETH
PHY 25 MHz
Crystal
RJ45
RMII ADC, DAC, CCU42, CCU80, POSIF0, U1C0,
U1C1, CAN0, ERU0, LEDTS
DSD, CCU4[0..2], CCU8[0..1], POSIF0, U0C0,
U1C0, U2C0, CAN[0..2], ERU[0..1]
SWVSWD
USB
GPIO,
ERU0,
ERU1
PORST
#RESET
LED1
BUTTON1 Cortex
Debug
(10pin)
XMC4500
Debug IC Micro USB
Voltage
Regulator
+5V
+3.3V
*
*
UART
BSL
Pin Header X1
2x20, 0.1"
Pin Header X2
2x20, 0.1"
Not assembled in
Relax Lite version Not assembled in both versions
XMC4500
Relax/Relax Lite
P1.1
LED2
P1.14
P1.0
P1.15
Power
LED
Debug
LED
* Simplified view on
power supply
BlockDiag.emf

XMC4500 Relax Kit-V1
XMC4500 Relax Lite Kit-V1
Hardware Description
Board Users Manual 9 Revision 1.2, 2014-01-13
2 Hardware Description
The following sections give a detailed description of the board hardware and how it can be used. Figure 2
shows the XMC4500 Relax Lite Kit-V1, Figure 3 shows the XMC4500 Relax Kit-V1.
Figure 2 XMC4500 Relax Lite Kit-V1
Pin Header X1 Reset Button Voltage
Regulator Power
LED
Pin Header X2
XMC4500
Microcontroller User
Buttons & LEDs
Cortex Debug
(10Pin)
XMC4500
Debug IC
Micro USB
Evaluation
Board Detachable Debugger
12 MHz XTAL
Micro USB
Debug
LED
PCB_Block_Lite.emf

XMC4500 Relax Kit-V1
XMC4500 Relax Lite Kit-V1
Hardware Description
Board Users Manual 10 Revision 1.2, 2014-01-13
Figure 3 XMC4500 Relax Kit-V1
Pin Header X1 Reset Button Voltage
Regulator Power
LED
Pin Header X2
XMC4500
Microcontroller User
Buttons & LEDs
Cortex Debug
(10Pin)
XMC4500
Debug IC
Micro USB
Micro USB
Evaluation
Board Detachable Debugger
Ethernet
RJ45 & PHY
qSPI Flash
microSD
RTC XTAL
12 MHz XTAL Debug
LED
PCB_Block.emf

XMC4500 Relax Kit-V1
XMC4500 Relax Lite Kit-V1
Hardware Description
Board Users Manual 11 Revision 1.2, 2014-01-13
2.1 Power Supply
The XMC4500 Relax/Relax Lite Kit-V1 must be supplied by an external 5 Volt DC power supply connected to
any of the Micro UBS plugs (X3, X100). Out of the box with the pre-programmed web server application and the
on-board debugger in operation the XMC4500 Relax Kit-V1 typically draws about 250 mA. The XMC4500 Relax
Lite Kit-V1 without the web server capabilities draws about 200 mA. This current can be delivered via the USB
plug of a PC, which is specified to deliver up to 500 mA. The Power LED indicates the presence of the
generated 3.3V supply voltage.
On-board reverse current protection diodes will ensure safe operation in case power is provided through both
USB plugs at the same time. These protection diodes allows to use the on-board debugger connected with a
PC/Notebook via X100 and a second host PC/Laptop connected with the XMC4500 Relax Kit via X3.
If the board is powered via a USB plug, it’s not recommended to apply an additional 5 Volt power supply to one
of the 5 Volt power pins (VDD5) on the pin headers X1 or X2, because there is no protection against reverse
current into the external power supply. These power pins can be used to power an external circuit. But care
must be taken not to draw more current than USB can deliver. A PCs as USB host typically can deliver up to
500 mA current. If higher currents are required and in order to avoid damages on the USB host the use of an
external USB power supply unit which is able to deliver higher currents than 500 mA is strongly recommended.
After power-up the Debug LED starts blinking. In case there is a connection to a PC via the Debug USB plug
X100 and the USB Debug Device drivers are installed on this PC, the Debug LED will turn from blinking to
constant illumination.
Figure 4 Power Supply Concept
XMC4500
Relax/Relax Lite Kit-V1
3.3V+5V
Power.emf
Pin Header X1 and X2
2x20, 0.1"
Micro
USB**
Micro
USB* Lin. Voltage
Regulator
IFX1763
IC101
XMC4500
Debug IC
IC100
XMC4500
Micro-
controller
IC1
Power
LED
Eth
Phy
X3
* Micro USB on Evaluation Board
** Micro USB on Detachable Debugger
IC200
X100
Infineon
Infineon
Infineon
Infineon
Infineon

XMC4500 Relax Kit-V1
XMC4500 Relax Lite Kit-V1
Hardware Description
Board Users Manual 12 Revision 1.2, 2014-01-13
2.2 Pin Header Connector
The pin headers X1 and X2 can be used to extend the evaluation board or to perform measurements on the
XMC4500. Figure 5 shows the available GPIOs/signals at the pin headers. The pinning table is also printed onto
the bottom side of the PCB.
2 1 2 1
GND GND GND GND
4 GND GND 3 4 GND GND 3
6 P5.7 P2.6 5 6 RESET# GND 5
8 P5.1 P5.2 7 8 P2.10 P2.1 7
10 P1.15** P5.0 910 P14.8 P2.14 9
12 P1.13 P1.14** 11 12 P14.9 P2.15 11
14 P1.11 P1.12 13 14 P14.0 VAREF 13
16 P1.5*** P1.10*** 15 16 P14.2 P14.1 15
18 P1.3*** P1.4*** 17 18 P14.4 P14.3 17
20 P1.1* P1.2*** 19 20 P14.6 P14.5 19
22 P1.9 P1.0* 21 22 P14.12 P14.7 21
24 P0.8 P1.8*** 23 24 P14.14 P14.13 23
26 P3.4 P0.7 25 26 P15.2 P14.15 25
28 P0.12 P3.3 27 28 HIB_IO_0 P15.3 27
30 P0.6 P0.11 29 30 P3.0 HIB_IO_1 29
32 P0.2 P0.5 31 32 P3.2 P3.1 31
34 P0.4 P0.3 33 34 P0.1 P0.9 33
36 GND GND 35 36 P0.0 P0.10 35
38 VDD3.3 VDD3.3 37 38 VDD3.3 VDD3.3 37
40 VDD5 VDD5 39 40 VDD5 VDD5 39
* P1.1 is connected to LED1, P1.0 is connected to LED2 (2 mA load, ~2 V clip of input signal)
** P1.14 is connected to BUTTON1, P1.15 is connected to BUTTON 2 (both with a 100 nF capacitor in parallel)
*** These pins are connected to the on-board SPI Fash Memory (not valid for Relax Lite):
X2.23 = Port 1.8 = SPI Flash CS#
X2.15 = Port 1.10 = SPI Flash CLK
X2.16 = Port 1.5 = SPI Flash DI (IO0)
X2.17 = Port 1.4 = SPI Flash DO (IO1)
X2.18 = Port 1.3 = SPI Flash WP# (IO2)
X2.19 = Port 1.2 = SPI Flash HOLD# (IO3)
Pin Header X2
Pin Header X1
(Top View)
Figure 5 Signal mapping of the pin headers
The XMC4500 provides a flexible mapping of functions to different pins. Figure 6 shows an example how the
communication peripheral functions UART, I2C, SPI, CAN and I2S can be mapped to XMC4500’s GPIOs.
GPIOs with the same colour code belong to the same group of physical pins and cannot be choosen twice. For
instance UART-3 has got a pin overlap with I2C-Master1 and therefore this combination cannot work in parallel.
Please also avoid pheripheral combinations which are using the same USIC channel. For example I2C-Master2
and UART-3 utilizing USIC 0 Channel 0 (U0C0), therefore this combination does not work in parallel.

XMC4500 Relax Kit-V1
XMC4500 Relax Lite Kit-V1
Hardware Description
Board Users Manual 13 Revision 1.2, 2014-01-13
UART
UART-1
UART-2
UART-3
UART-4
TX
P0.1 / U1C1.DOUT0
P1.5 / U0C0.DOUT0
P5.1 / U0C0.DOUT0
P0.5 / U1C0.DOUT0
RX
P0.0 / U1C1.DX0D
P1.4 / U0C0.DX0B
P5.0 / U0C0.DX0D
P0.4 / U1C0.DX0A
I2C Master/Slave
I2C-Master1
I2C-Master2
I2C-Master3
I2C-Slave1
I2C-Slave2
SCL (clock)
P5.2 / U2C0.SCLKOUT
P1.10 / U0C0.SCLKOUT
P0.11 / U1C0.SCLKOUT
P5.2 / U2C0.DX1A
P0.11 / U1C0.DX1A
SDA (data)
P5.0 / U2C0.DOUT0 /
.DX0B
P1.5 / U0C0.DOUT0
/.DX0A
P0.5 / U1C0.DOUT0
/.DX0B
P5.0 /U2C0.DOUT0 /
.DX0B
P0.5 / U1C0.DOUT0
/.DX0B
SPI Master/Slave
SPI-Master1
SPI-Master2
SPI-Master3
SPI-Master4
SPI-Slave1
SPI-Slave2
MOSI
P0.1 / U1C1.DOUT0
P5.0 / U2C0.DOUT0
P1.5 / U0C0.DOUT0
P0.5 / U1C0.DOUT0
P0.0 / U1C1.DX0D
P0.4 / U1C0.DX0A
MISO
P0.0 / U1C1.DX0D
P5.1 / U2C0.DX0A
P1.4 / U0C0.DX0B
P0.4 / U1C0.DX0A
P0.1 / U1C1.DOUT0
P0.5 / U1C0.DOUT0
SCK (clock)
P0.10 / U1C1.SCLKOUT
P5.2 / U2C0.SCLKOUT
P1.10 / U0C0.SCLKOUT
P0.11 / U1C0.SCLKOUT
P0.10 / U1C1.DX1A
P0.11 / U1C0.DX1A
CS (chip select)
P0.9 / U1C1.SELO0*
P2.6 / U2C0.SELO4
P1.11 / U0C0.SELO0**
P0.6 / U1C0.SELO0
P0.9 / U1C1.DX2A
P0.6 / U1C0.DX2A
CAN
CAN-1
CAN-2
TX
P1.12 / CAN.N1_TXD
P1.4 / CAN.N0_TXD
RX
P1.13 / CAN.N1_RXDC
P1.5 / CAN.N0_RXDA
I2S Master/Slave
I2C-Master1
I2C-Master2
I2C-Master3
I2C-Slave1
SCK (clock)
P5.2 / U2C0.SCLKOUT
P1.10 / U0C0.SCLKOUT
P0.11 / U1C0.SCLKOUT
P0.11 / U1C0.DX1A
SD (data)
P5.0 / U2C0.DOUT0 /
.DX0B
P1.5 / U0C0.DOUT0
/.DX0A
P0.5 / U1C0.DOUT0
/.DX0B
P5.0 / U2C0.DOUT0 /
.DX0B
WS (wait)
P2.6 / U2C0.SEL04
P1.11 / U0C0.SELO0
P0.6 / U1C0.SELO0
P0.6 / U2C0.DX2A
* more chip select signals for U1C1 can befound at P3.3, P3.4, P3.5, P3.6
** another chip select signal for U0C0 can befound at P1.8
Figure 6 Mapping of communication peripherals to GPIOs and it’s corresponding functions

XMC4500 Relax Kit-V1
XMC4500 Relax Lite Kit-V1
Production Data
Board Users Manual 14 Revision 1.2, 2014-01-13
3 Production Data
3.1 Schematics
This chapter contains the schematics for the XMC4500 Relax/Relax Lite Kit-V1:
Figure 7: CPU, Pin Headers, Buttons, LEDs, Reset
Figure 8: On-board Debugger, Power Supply, Ethernet, Quad-SPI Memory, SD Card Slot, RTC Crystal

XMC4500 Relax Kit-V1
XMC4500 Relax Lite Kit-V1
Production Data
Board Users Manual 15 Revision 1.2, 2014-01-13
Figure 7 CPU, Pin Headers, Buttons, LEDs, Reset
AGND
AGND
10uF/10V
10uF/10V
100nF
100nF
100nF
100nF
100nF
100nF
100nF
100nF
10uF/10V
15pF
15pF
100nF 100nF
10nF
100nF 100nF
ESD8V0L2B-03L
BAT60A
BAT54-02V
GND GND
GND GND GND GND
GND GND
GND
GND GNDGNDGND
GND
GND GND GND
GND
GND GND
GND GND
XMC4500_LQFP100
BLM18PG600
BLM18PG600
BLM18PG600
LED-RT/D/0603 LED-RT/D/0603
12MHZ/S/3.2X2.5
10k/0402 680R 680R
10k 10k
33R 33R
510R
TMPS2-SMD TMPS2-SMD
TMPS2-SMD
VDD5
VDD5
VDD3.3
VDD3.3
VDD5
VDD5
VDD3.3
VDD3.3
VDD3.3
VDD3.3
VDD5
VDD3.3 VDD3.3
VDD3.3
VDD3.3
VDD3.3
2x20 2*20
ZX62-AB-5PA
FTSH-105-01-F-D-KXMC4500-F100x1024
P0.[0..15],P1.[0..15],P2.[0..15],P3.[0..15],P4.[0..7],P5.[0..11],P6.[0..6],P14.[0..15],P15.[2..15],HIB_IO_0,HIB_IO_1
DBGPRES#
ETH_CLK
ETH_CRS
ETH_MDC
ETH_MDIO
ETH_RXD0 ETH_RXD1
ETH_RXER
ETH_TXD0 ETH_TXD1
ETH_TXEN
HIB_IO_0
HIB_IO_0
HIB_IO_1
HIB_IO_1
MMC_CLK
MMC_CMD
MMC_DAT0
MMC_DAT1 MMC_DAT2
MMC_DAT3
P0.0
P0.0
P0.1
P0.1
P0.2
P0.2
P0.3
P0.3
P0.4
P0.4
P0.5
P0.5
P0.6
P0.6
P0.7
P0.7
P0.7
P0.8
P0.8
P0.9
P0.9
P0.10
P0.10
P0.11
P0.11
P0.12
P0.12
P1.0
P1.0
P1.0
P1.1
P1.1
P1.1
P1.2
P1.2
P1.3
P1.3
P1.4
P1.4 P1.5
P1.5
P1.8
P1.8 P1.9
P1.9
P1.10
P1.10
P1.11
P1.11
P1.12
P1.12
P1.13
P1.13
P1.14
P1.14
P1.14
P1.15
P1.15
P1.15
P2.1
P2.1
P2.1
P2.6
P2.6
P2.10
P2.10
P2.14
P2.14
P2.15
P2.15
P3.0
P3.0
P3.1
P3.1
P3.2
P3.2
P3.3
P3.3
P3.4
P3.4
P5.0
P5.0
P5.1
P5.1
P5.2
P5.2
P5.7
P5.7
P14.0
P14.0
P14.1
P14.1
P14.2
P14.2
P14.3
P14.3
P14.4
P14.4
P14.5
P14.5
P14.6
P14.6
P14.7
P14.7
P14.8
P14.8
P14.9
P14.9
P14.12
P14.12
P14.13
P14.13
P14.14
P14.14
P14.15
P14.15
P15.2
P15.2
P15.3
P15.3
RESET#
RESET#
RESET#
RESET#
RTC1 RTC2
TCK
TCK
TMS TMS
USB_DM USB_DP
VAREF
VAREF
VDDA
VDDC
ADJ_1 ADJ_2 ADJ_3
C1
C2
C3
C4
C5
C6
C7
C8
C9
C10
C11
C12
C13
C16 C17
C20
C24 C25
1
2
3
D1
A C
D2
21 D3
EPAD EXP
HIB_IO_0
14 HIB_IO_1 13
P0.0
2P0.1 1P0.2
100 P0.3
99 P0.4 98 P0.5 97 P0.6 96 P0.7 89 P0.8 88 P0.9
4P0.10 3P0.11
95 P0.12 94
P1.0
79 P1.1 78 P1.2 77 P1.3 76 P1.4 75 P1.5 74 P1.6 83 P1.7 82 P1.8 81 P1.9 80 P1.10 73 P1.11 72 P1.12 71 P1.13 70 P1.14 69 P1.15 68
P2.0 52 P2.1 51 P2.2 50 P2.3 49 P2.4 48 P2.5 47 P2.6 54 P2.7 53 P2.8 46 P2.9 45
P2.10 44 P2.14 41 P2.15 40
P3.0 7 P3.1 6 P3.2 5 P3.3 93 P3.4 92 P3.5 91 P3.6 90 P4.0 85 P4.1 84 P5.0 58 P5.1 57 P5.2 56 P5.7 55
P14.0
31 P14.1 30 P14.2 29 P14.3 28 P14.4 27 P14.5 26 P14.6 25 P14.7 24 P14.8 37 P14.9 36 P14.12 23 P14.13 22 P14.14 21 P14.15 20
P15.2 19 P15.3 18 P15.8 39 P15.9 38
PORST# 65
RTC_XTAL_1 15 RTC_XTAL_2 16
TCK 67
TMS 66
USB_D+
9USB_D- 8
VAGND 32
VAREF 33
VBAT
17
VBUS
10
VDDA 35
VDDC
12 VDDC1 42 VDDC2 64 VDDC3 86 VDDP 11 VDDP1 43 VDDP2 60 VDDP3 87
VSS 59
VSSA 34
VSSO 63
XTAL1 61 XTAL2 62
IC1
L1
L2
L3
LED1 LED2
Q1
R1 R3 R4
R5 R6
R10 R11
R12
P
P1 S
S1
SW1
P
P1 S
S1
SW2
P
P1 S
S1
SW3
1 2 3 4 5 6 7 8 9 10
11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40
X1
1 2 3 4 5 6 7 8 9 10
11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40
X2
1 2 3 4 5
1 2 3 4 5 6 7 8 9 10
X5
X3
D1
D2
A B C D E
12345678
A B C D E
12345678
XMC4500_Relax-V1 25.10.2012 13:02:04
1/2
Sheet:
Legal Disclaimer The information given in this document shall in no event be regarded as a guarantee of conditions or characteristics. With respect to any examples or hints given herein, any typical values stated herein and/or any information regarding the application of the device, Infineon Technologies hereby disclaims any and all warranties and liabilities of any kind, including without limitation, warranties of non-infringement of intellectual property rights of any third party.
USB
Supply
Analog
Digital
Hibernate/RTC
XMC4500 Relax/Relax Lite Kit
V1 / 25.10.2012
LED2 LED1
BUTTON 2 BUTTON 1
USB Connector
Reset
Buttons & LEDs
Cortex Debug
XMC4500RelaxandXMC4500RelaxLite
2mA LED 2mA LED
TDO/SWO TDI

XMC4500 Relax Kit-V1
XMC4500 Relax Lite Kit-V1
Production Data
Board Users Manual 16 Revision 1.2, 2014-01-13
Figure 8 On-board Debugger, Power Supply, Ethernet, Quad-SPI Memory, SD Card Slot, RTC Crystal
15pF
15pF
100nF
15pF
15pF
100nF
100nF
10uF/10V
10uF/10V
100nF
100nF
10uF/10V
10uF/10V
22uF/10V
100nF
22uF/10V
100nF
22uF/10V
100nF
22pF
22pF
100nF
100nF 10uF/10V
100nF
ESD8V0L2B-03L
BAT60A
BAT54-02V
BAT54-02V
GND
GND
GND GND
GND GND GND
GND
GND
GND
GND GND
GND
GNDGND GND
GND GND GNDGND GNDGND
GNDGND
GND GNDGND GND
XMC4500_LQFP100
IFX1117MEV33
S25FL032P0XMFI01
BLM18PG600
BLM18PG600
BLM18PG600
LED-GN/D/0603
LED-GN/D/0603
32.768KHz
12MHZ/S/3.2X2.5
25MHz/50ppm
10k
680R
33R/0402 33R/0402
510R/0603
100R
10k
680R/0603
1k
120R
1k
6k49
no ass./0R
120R
10k
10k
10k
10k
10k
10k
10k
10k
VDD3.3
VDD3.3
VDD5
VDD3.3
VDD3.3
VDD3.3
VDD3.3
VDD3.3
VDD3.3
VDD3.3
VDD3.3
VDD3.3
VDD3.3
VDD3.3
VDD5
ZX62-AB-5PA
no ass.
Würth 7499010211A
3M_2908-05WB
XMC4500-F100x1024
CS
CS
DBGPRES#
DEBUG_LED
ETH_CLK ETH_CRS ETH_MDC ETH_MDIO ETH_RXD0 ETH_RXD1 ETH_RXER ETH_TXD0 ETH_TXD1 ETH_TXEN MMC_CLK MMC_CMD MMC_DAT0 MMC_DAT1 MMC_DAT2 MMC_DAT3
P0.0
P0.0
P0.1
P0.1
P0.7
P1.2 P1.3 P1.4 P1.5 P1.8 P1.10
P2.1
P2.1
P2.1
P2.10
P3.1
RESET#
RESET#
RESET#
RTC1 RTC2
TCK
TCK
TCK
TMS
TMS
WTCK WTMS
C14
C15
C19
C100
C101
C102
C103
C104
C105
C106
C108
C109
C110
C200
C201
C202
C203
C204
C205
C206
C207
C208
C209
C210
C400
1
2
3
D101
A C
D102
2 1
D200
2 1
D201
EPAD
EXP
HIB_IO_0 14 HIB_IO_1 13
P0.0 2 P0.1 1 P0.2 100 P0.3 99 P0.4 98 P0.5 97 P0.6 96 P0.7 89 P0.8 88 P0.9 4
P0.10 3 P0.11 95 P0.12 94
P1.0 79 P1.1 78 P1.2 77 P1.3 76 P1.4 75 P1.5 74 P1.6 83 P1.7 82 P1.8 81 P1.9 80
P1.10 73 P1.11 72 P1.12 71 P1.13 70 P1.14 69 P1.15 68
P2.0
52 P2.1 51 P2.2 50 P2.3 49 P2.4 48 P2.5 47 P2.6 54 P2.7 53 P2.8 46 P2.9 45 P2.10 44 P2.14 41 P2.15 40
P3.0
7P3.1 6P3.2 5P3.3
93 P3.4 92 P3.5 91 P3.6 90
P4.0
85 P4.1 84
P5.0
58 P5.1 57 P5.2 56 P5.7 55
P14.0 31 P14.1 30 P14.2 29 P14.3 28 P14.4 27 P14.5 26 P14.6 25 P14.7 24 P14.8 37 P14.9 36
P14.12 23 P14.13 22 P14.14 21 P14.15 20
P15.2
19 P15.3 18 P15.8 39 P15.9 38
PORST#
65
RTC_XTAL_1
15
RTC_XTAL_2
16
TCK
67 TMS 66
USB_D+ 9
USB_D- 8
VAGND
32 VAREF 33
VBAT 17
VBUS 10
VDDA
35
VDDC 12
VDDC1 42 VDDC2 64 VDDC3 86
VDDP 11
VDDP1 43 VDDP2 60 VDDP3 87
VSS
59
VSSA
34
VSSO
63
XTAL1
61
XTAL2
62
IC100
ADJ
1
IN
3OUT1 2
OUT2 4
IC101
CRS_DV
15
GND 22
INTRP 18
LED0 23
MDC
11 MDIO 10
P_GND EXP
REF_CLK
16
REXT 9
RST# 24
RXD0
13 RXD1 12 RXER 17
RXM 3
RXP 4
TXD0
20 TXD1 21
TXEN
19
TXM 5
TXP 6
VDDA_3.3
2
VDDIO
14 VDD_1.2
1
XI
8
XO
7
CLK
6CS# 1
DI
5DO 2
GND 4
HOLD#
7
VCC
8
WP# 3
IC400
1 2 3 4 5 6 7 8
JP500
1 2 3 4 5 6 7 8
JP501
L100
L200
L201
LED100
LED101
Q2
Q100
Q200
R7
R100
R101 R102
R103
R104
R105
R106
R200
R201
R203
R204
R206
R207
R300
R301
R302
R303
R304
R400
R401
R402
1 2 3 4 5
X100C
1 2 3 4
X101
CG
8
CTR
5
CTT
4LA 9
LC 10
NC
7
RA 12
RC 11
RD+
3
RD-
6
S1 S1 S2 S2
TD+
1
TD-
2
X200
CLK/SCK
5
CMD/MOSI
3
DAT0/MISO
7DAT1 8
DAT2
1DAT3/CS_N 2
GND
6
S1 S1 S2 S2 S3 S3 S4 S4
VDD
4
X300
IC200
KSZ8031RNL
D1
D2
A B C D E
12345678
A B C D E
12345678
XMC4500_Relax-V1 25.10.2012 13:02:04
2/2
Sheet:
Legal Disclaimer The information given in this document shall in no event be regarded as a guarantee of conditions or characteristics. With respect to any examples or hints given herein, any typical values stated herein and/or any information regarding the application of the device, Infineon Technologies hereby disclaims any and all warranties and liabilities of any kind, including without limitation, warranties of non-infringement of intellectual property rights of any third party.
USB
Supply Analog Digital
Hibernate/RTC
(IO0) (IO1)
(IO3) (IO2)
RJ45
XMC4500 Relax/Relax Lite Kit
Debug
Micro SD-Card qSPI Flash
Power
V1 / 25.10.2012
RTC Crystal
On-board Debugger Ethernet
Debug Connector
Power
Relax Kit only Relax Kit only Relax Kit only Relax Kit only
SWV
TDI
TMS TCK
TDO
4 TH-Pads
2mA LED
IC100_RXD IC100_TXD
2.54mm pitch

XMC4500 Relax Kit-V1
XMC4500 Relax Lite Kit-V1
Production Data
Board Users Manual 17 Revision 1.2, 2014-01-13
3.2 Components Placement and Geometry
Figure 9 Components Placement and Geometry
75.5 mm
98.52 mm
50.8 mm
3.4 mm 47.4 mm
50x 0.4mm
drills, NPTH
27.2 mm 9.2 mm 36.4 mm
BUTTON1
Power
BUTTON2
LED2LED1
RESET
X1X2
www.infineon.com/xmc-dev
1
2
1
2
IC1
Q1
X3
X5
IC101
Q100
IC100
X100
IC400
X300
Q2
IC200
X200
XMC4500 Relax/Relax Lite Kit-V1
1
Debug
1 1
10 20 30
9 19 29
P1.0P1.1
1234
9
10
11
12
1357
8 6 4 2
LEFTRIGHT
FRONT
card IN
card OUT
1
40
1
40
ADJ_1 ADJ_2
ADJ_3
C1
C2
C3
C4
C5
C6
C7
C8 C9
C10
C11
C12
C13
C14 C15
C16
C17
C19
C20
C24C25
C100
C101
C102
C103
C104 C105 C106
C108
C109
C110
C200
C201
C202
C203
C204
C205
C206
C207
C208
C209
C210
C400
D1
D2
D3
D101
D102
D200
D201
IC1
IC100
IC101
IC200
IC400
JP500 JP501
L1
L2
L3
L100
L200
L201
LED1
LED2
LED100
LED101
Q1
Q2
Q100
Q200
R1
R3
R4
R5
R6
R7
R10
R11
R12
R100
R101
R102
R103
R104
R105
R106
R200
R201 R203
R204
R206
R207
R300
R301
R302
R303
R304
R400
R401
R402
SW1SW2 SW3
X1
X2
X3
X5
X100
X101
X200
X300

XMC4500 Relax Kit-V1
XMC4500 Relax Lite Kit-V1
Production Data
Board Users Manual 18 Revision 1.2, 2014-01-13
3.3 List of Material
The list of material is valid for the XMC4500 Relax/Relax Lite Kit-V1.
Table 2 List of Material
No.
Qty
Value
Device
Reference
Designator
1
2
2x4
Pin Header 0.1” TH
JP500, JP501
2
2
1k
Resistor
R200, R203
3
1
2*20
Pin Header 0.1” TH
X2
4
1
2x20
Pin Header 0.1” TH
X1
5
1
3M_2908-05WB
microSD Card Holder
X300
6
1
6k49
Resistor
R204
7
12
10k
Resistor
R5, R6, R7, R105, R300, R301, R302, R303,
R304, R400, R401, R402
8
1
10k/0402
Resistor
R1
9
1
10nF
Capacitor
C20
10
8
10uF/10V
Capacitor
C1, C2, C11, C104, C105, C109, C110, C210
11
2
12MHz/S/3.2X2.5
Crystal 12 MHz
Q1, Q100
12
6
15pF
Capacitor
C12, C13, C14, C15, C100, C101
13
2
22pF
Capacitor
C206, C207
14
3
22uF/10V
Capacitor
C200, C202, C204
15
1
25MHz/50ppm
Crystal 12 MHz
Q200
16
1
32.768KHz
Crystal 32 kHz
Q2
17
2
33R
Resistor
R10, R11
18
2
33R/0402
Resistor
R101, R102
19
1
100R
Resistor
R104
20
23
100nF
Capacitor
C3, C4, C5, C6, C7, C8, C9, C10, C16, C17,
C19, C24, C25, C102, C103, C106, C108,
C201, C203, C205, C208, C209, C400
21
2
120R
Resistor
R201, R207
22
1
510R
Resistor
R12
23
1
510R/0603
Resistor
R103
24
3
680R
Resistor
R3, R4, R100
25
1
680R/0603
Resistor
R106
26
3
BAT54-02V
Schottky Diode, Infineon
D3, D200, D201
27
2
BAT60A
Schottky Diode, Infineon
D2, D102
28
6
BLM18PG600
Inductor
L1, L2, L3, L100, L200, L201
29
2
ESD8V0L2B-03L
TVS Diode, Infineon
D1, D101
30
3
FIDUCIAL
FIDUCIAL
ADJ_1, ADJ_2, ADJ_3
31
1
FTSH-105-01-F-D-K
Connector 2x5, Samtec
X5
32
1
IFX1117MEV33
Linear Voltage Regulator,
Infineon
IC101
33
1
KSZ8031RNL
Ethernet Phy, Micrel
IC200
34
2
LED-GN/D/0603
LED green
LED100, LED101
35
2
LED-RT/D/0603
LED red
LED1, LED2
36
1
S25FL032P0XMFI01
Quad-SPI Flash, Spansion
IC400

XMC4500 Relax Kit-V1
XMC4500 Relax Lite Kit-V1
Production Data
Board Users Manual 19 Revision 1.2, 2014-01-13
Table 2 List of Material
No.
Qty
Value
Device
Reference
Designator
37
3
TMPS2-SMD
Push Button
SW1, SW2, SW3
38
1
7499010211A
Ethernet RJ45 Plug, Würth
X200
39
2
XMC4500-F100F1024
Microcontroller Cortex
M4F, Infineon
IC1, IC100
40
2
ZX62-AB-5PA
Micro USB Plug
X3, X100
41
1
no ass.
Pin Header 1x4
X101
42
1
no ass./0R
Resistor
R206

w w w . i n f i n e o n . c o m
Published by Infineon Technologies AG