Inner Range Integriti Prisma Keypad User manual

1
Integriti.Integriti.
Integriti.Integriti.
Integriti. Colour Graphic Terminal User Manual.
Colour Graphic TColour Graphic T
Colour Graphic TColour Graphic T
Colour Graphic Terminalerminal
erminalerminal
erminal
User Manual. RUser Manual. R
User Manual. RUser Manual. R
User Manual. Rev 3.1ev 3.1
ev 3.1ev 3.1
ev 3.1
© 2013 - 2014. Inner Range Pty. Ltd. Part Number: 636000U

2Integriti.Integriti.
Integriti.Integriti.
Integriti. Revision 3.1 June 2014.
SYSTEM DETAILS
CUSTOMER: ...............................................................................................
SITE ADDRESS / LOCATION: .......................................................................
...............................................................................................
PHONE: ........................................ FAX: .............................
E-MAIL.................................................................................
INSTALLED BY:.............................................................................................
...............................................................................................
PHONE: ........................................ FAX: .............................
E-MAIL.................................................................................
MAINTENANCE & SERVICE: ....................................................................
...............................................................................................
PHONE: ........................................ FAX: .............................
E-MAIL.................................................................................
MONITORED BY: ..........................................................................................
...............................................................................................
PHONE: ........................................ FAX: .............................
E-MAIL.................................................................................

3
Integriti.Integriti.
Integriti.Integriti.
Integriti. Colour Graphic Terminal User Manual.
CONTENTS
The Keypad. .......................................................................................... 4
Default LCD Display............................................................................. 7
Indicator Lamps..................................................................................... 9
USER ALARM SYSTEM OPERATIONS........................................ 10
System Status Messages. ....................................................................... 10
Logging On............................................................................................ 11
Turning Area/s OFF. .............................................................................. 12
Deferred Arming.................................................................................... 14
Turning Area/s ON. ............................................................................... 15
Activating a PanicAlarm. ..................................................................... 17
Activating a Duress Alarm. ................................................................... 17
Acknowledge an Event or Alarm. ......................................................... 18
USER SYSTEM STATUS & CONTROL OPERATIONS .............. 19
User Action Control............................................................................... 19
View Alarm Review information........................................................... 21
View System Information...................................................................... 22
MENU OPTIONS................................................................................ 23
Accessing the Menu. ............................................................................. 23
Keypad Functions in the Menu. ............................................................ 24
If
Used.
[ ]
[ ]
[ ]
[ ]
[ ]
[ ]
[ ]
[ ]
[ ]
[ ]
[ ]
[ ]
INNER RANGE recommends that all INTEGRITI systems
are installed & maintained by
FACTORY CERTIFIED TECHNICIANS.
For a list of Accredited Dealers in your area refer to the
Inner Range Website. http://www.innerrange.com
Disclaimer
While every effort has been made to ensure the accuracy of this manual, the manufacturer and/
or it’s agents assume no responsibility or liability for any errors or omissions.
Due to ongoing development and product improvements, the contents of this manual are subject
to change without notice.
Comments relating to this manual should be sent to [email protected]
Contents

4Integriti.Integriti.
Integriti.Integriti.
Integriti. Revision 3.1 June 2014.
FUNCTION KEYS. The operation of these keys will change
according to the screen currently in use.
e.g. Left Key: Cancel / Menu / Back / Done
Right Key: Logon / Delete / Search / Selecting a mode
of operation.
COMMON FUNCTION KEY OPERATIONS
<Cancel>. Allows you to cancel a PIN code entry without
logging an attempt.
e.g. If you make a mistake and want to start again.
<Menu>. Accesses the Menu for information and operations
other than Area On/Off, Door Access, etc. A limited Menu is
displayed if you are not logged on.
The Keypad.
Operations & programming are performed by using the function keys, fixed keys and
scroll wheel. You may only press one key at a time.
Each time a key is pressed, a short “beep” is sounded to indicate that the key press was
accepted. (The Installer can disable or change the volume of the beeping if required)
A ‘crash’ sound will be sounded if a key press is not accepted or is not allowed.
Function keys
Scroll wheel and
up, down, left, & right arrow keys
OK key
ON / OFF keys
Alpha-numeric keys
END key
HELP key

5
Integriti.Integriti.
Integriti.Integriti.
Integriti. Colour Graphic Terminal User Manual.
<Back>. Return to the previous screen.
<Logon>. Displays the Logon screen.
<Done>. Returns to the Logged Off Menu.
<Delete>. Allows you to delete the last character entered.
e.g. If you make a mistake while entering your PIN code.
<Search>. Switches to the Alpha-numeric search mode for
selecting an entity to control or edit.
ARROW KEYS AND SCROLL WHEEL.
The SCROLL WHEEL or the <UP> and <DOWN> arrow
keys are used to scroll up and down through lists of available
items to view, control or edit, (e.g. Areas, Review messages,
Users, etc), and to adjust numerical values (e.g. In a Timer).
The Scroll Wheel can also be used to move the cursor left or
right.
The <LEFT> arrow key will move the cursor to the left.
The <RIGHT> arrow key will move the cursor to the right.
The <OK> key must always be pressed after you have
entered your secret PIN code (Unless performing a “Quick
Arm or Disarm” operation). You have 10 seconds to press the
<OK> key after you have completed entering the code.
If PIN codes are used to unlock doors, pressing the <OK>
key again will perform the Door unlock operation on the
Door associated with the Terminal.
On Terminals that are programmed ONLY for Door Access
control, the <OK> key may not need to be pressed twice.
(In some cases, the <OK> key may be programmed to unlock
a door without a PIN code being used. e.g. In low security
TERMINAL

6Integriti.Integriti.
Integriti.Integriti.
Integriti. Revision 3.1 June 2014.
periods, or when the Terminal is on the inside of an
Exit Door.)
OFF / ON. Used to turn Off or turn On, the Item
named on the Display at the time. e.g. Area, Area
List, UserAction, etc.
ALPHA-NUMERIC keys. Used for entering your
secret PIN code. You have 10 seconds to enter each
digit, and must press the <OK> key when complete.
This sequence is required before most operations can
be performed.
These keys can also be used to search for an item by
name. e.g. A User to edit or an Input to Isolate.
HELP. Can be pressed at any time to display a “Help
message” about the current operation being
performed.
The <END> key is used when you have finished
performing the required operations.
NOTE: Keypad keys also have other functions when you are selecting, viewing,
controlling or editing items in the menu. Details of the keypad functions when you are
in the menu are provided in the “Menu Options” section of this manual.
The system may be programmed to limit the operations available at some Terminals.

7
Integriti.Integriti.
Integriti.Integriti.
Integriti. Colour Graphic Terminal User Manual.
Monday, 18th Apr 11:25am
Library is Off
Integriti by Inner Range
Menu Temp 25.3°C Logon
Default LCD Display.
A number of options are offered for the Default display that will be shown when no
User operations are being performed, and no other messages are being displayed.
The Default display can be selected separately for each Terminal in your system.
Settings can only be programmed by the Installer, who can also advise you on the
appropriate options. If no specific Default Display option has been chosen, the
Integriti logo will be displayed. See image on front cover.
TIME & DATE.
The current system Time & Date may be displayed
in one of 3 formats:
- Single text line at the top or bottom of the screen.
- Digital Clock with date below.
- Analogue Clock in top left-hand corner.
(The Text and Digital Clock options are shown
opposite)
This is useful in systems that generate Time-On-
Site reports to show the Date & Time being logged.
SINGLE AREA STATUS.
This option allows the name and current status of a
single Area to be displayed. This is useful when
the Terminal only provides control of one Area.
LCD MESSAGES.
This feature provides one or more customized
messages that are appropriate for the particular Site
and/or the particular Terminal.
e.g. -The Monitoring Station’s Phone number.
-The Installer’s Phone number.
-“Welcome to <your company name>”.
Monday, 18th Apr 11:25am
Friday, 16th Aug 2013
12:48 PM
TERMINAL

8Integriti.Integriti.
Integriti.Integriti.
Integriti. Revision 3.1 June 2014.
Admin Kitchen Bistro
Cellar Cool Lounge
Room Bar
PIN Code Review
Information Control
Temp 25.3°C Logon
Monday, 18th Apr 11:25am
Menu Temp 25.3°C Logon
ICONS.
This option displays four logged-off menu options
as icons.
i.e. PIN Code (Logon), Review (Event log),
Information and Control.
MULTIPLE ENTITY STATUS.
The Multiple Entity status option allows the
current status of up to 6 Entities to be viewed by
name.
At present, only Areas are supported.
(Other entities such as Inputs or Outputs may be
supported in future)
When Areas are assigned, the icon indicates the
current status;
- Off (Disarmed) - On (Armed)
- Timed Off (DeferArm timer running)
- Defer Warning (Timer about to expire)
1 2
3 4

9
Integriti.Integriti.
Integriti.Integriti.
Integriti. Colour Graphic Terminal User Manual.
The Indicator Lamps.
Eight multi purpose lamps are provided for quick indication of Area and Alarm Status,
and/or other conditions.
The settings can only be programmed by the Installer, who can also advise on the
appropriate options for your system.
When programmed for “Area Array”, the lamps will indicate the status of up to 8
sequential Areas in the following manner:
Green or Off = Area Off (Disarmed)
Green Slow Flash = Entry or Exit Timer running.
Red = Area On (Armed)
Red Fast Flash =Alarm in this Area.
Yellow Slow Flash = Deferred Area Arm.
Yellow Fast Flash = Deferred Area Arm Warning (About to Arm).
The lamps may have been programmed to indicate other conditions or the status of
other entities. If so, please record their purpose here:
Lamp No: 1234 5678
Lamp 1...........................................
Lamp 2...........................................
Lamp 3...........................................
Lamp 4...........................................
Lamp 5...........................................
Lamp 6...........................................
Lamp 7...........................................
Lamp 8...........................................
TERMINAL

10 Integriti.Integriti.
Integriti.Integriti.
Integriti. Revision 3.1 June 2014.
USER OPERATIONS
User operations are the basic day-to-day operations performed on the system.
These include: Turning Areas ON and OFF. (Arming and Disarming)
Acknowledging Alarm messages.
Accessing Doors and/or Lifts
Viewing Area Status information and reviewing the Event Log.
Controlling Outputs (Turning User Actions ON and OFF)
The system is designed for simple operation, providing straightforward procedures,
and display prompts in plain English text. However, if a User is unsure of what to do
next, a simple press of the <HELP> key provides additional assistance.
Many User operations begin with the same simple procedure. The User logs on to the
Terminal by entering their secret PIN code followed by the <OK> key. The User is
then verified and will be able to perform any operations allowed. The LOGON
procedure is described on the following page followed by the common operations.
System Status Messages.
System operation is continuously monitored for problems and special conditions.
Your sytem may be configured to display a status message when any of these problems
or conditions exist. These messages are displayed on the nominated Terminal/s and will
remain on the display until the condition is rectified. The table below describes the
messages currently provided. For messages not listed here, please consult the Installer.
You will probably require the Installer to rectify most of these conditions.
EGASSEMNOITPIRCSED
liafCA)s(tupnI kcehc,elbisseccafI.rewopCAtsolevahseludoMeromroenO .nodehctiws&detcennocsikcap-gulp/drocrewopCA
ttabwol)s(tupnI.egatlovyrettabwolevahseludoMeromroenO
liaftsetttab)s(tupnI.tsetyrettabadeliafevah
seludoMeromroenO
repmattenibac)s(tupnI aevomerronepootedamneebsahtpmettadesirohtuanunA .erusolcneeludoM
s
mmocNAL)s(tupnI melborp lortnoCehthtiwgnitacinummoctoneraseludoMeromroenO .melborpeludoMaroegamadelbacebyamerehT.eludoM
detalosi)s(tupnI ,tluafaoteuddetalosifI.detalosineebevahstupnieromroenO .ecivreseriuqery
amgnilbacroecivedeht
...)s(eludoM... ro"gnissim)s(eludoM"sahcussegassemeludoMynA .rellatsnIehtotdetroper
ebdluohs"derucesnu)s(eludoM"