Inseego MiFi 8000 User manual

1
Geoverse | 13920 SE Eastgate Way, Suite 115 | Bellevue, WA 98005 | www.geoverse.io | 425.217.0600
Instruction Manual –APN Configuration
Inseego MiFi 8000
INSTRUCTION MANUAL
APN AND BASIC NETWORK CONFIGURATION
Inseego MiFi 8000
MiFi Device
First step - Insert the Geoverse SIM card
Open the back cover and insert the SIM card into the slot on the top left corner per the
figure.

2
Geoverse | 13920 SE Eastgate Way, Suite 115 | Bellevue, WA 98005 | www.geoverse.io | 425.217.0600
Instruction Manual –APN Configuration
Inseego MiFi 8000
1. Use the included power cable to power the device.
2. Turn on Wi-Fi. It may take several minutes to load.
3. Navigate to Menu, Settings, Advanced Settings
a. Here, you will find the website and admin password to connect to the
device via your computer/laptop. The link will always be http://my.mifi
Please see the three images below for reference:

3
Geoverse | 13920 SE Eastgate Way, Suite 115 | Bellevue, WA 98005 | www.geoverse.io | 425.217.0600
Instruction Manual –APN Configuration
Inseego MiFi 8000

4
Geoverse | 13920 SE Eastgate Way, Suite 115 | Bellevue, WA 98005 | www.geoverse.io | 425.217.0600
Instruction Manual –APN Configuration
Inseego MiFi 8000
From Computer/Laptop
1. Open the Wi-Fi network settings on your laptop/computer
2. Open the list of Wi-Fi networks and connect to the MiFi network. It will be
formatted as MiFixxxx-xxxx
3. Go to the following website: http://my.mifi
4. Use the password from the device to sign in
5. Navigate to Settings, then Advanced, then Continue
6. Under APN, enter ‘geoverse.[your APN]’
7. Save changes
Once you complete these steps, the device will be activated.
If you still run into trouble, turn roaming on and off as required.