Inseego Mifi X Pro 5G User manual

Global mobile hotspot
QUICK START GUIDE

MiFi X PRO 5G QUICK START GUIDE 2
About your MiFi X PRO
*To reduce power consumption, the ethernet port is deactivated by default. You can activate it from the
touchscreen (Menu > Settings > Enable Ethernet Port), or from the Admin web UI (Settings > Preferences
> Enable Ethernet Port).

MiFi X PRO 5G QUICK START GUIDE 3
Status indicators
Home
Network signal strength
Data is transferring between mobile network and MiFi
Roaming
Unread messages
MiFi Wi-Fi network
Connected devices
USB tethered
Battery fully charged
Battery needs charge
Battery on AC charge
Battery on USB charge
MiFi in Battery Preservation Mode
Ethernet port activated
Ethernet port deactivated

MiFi X PRO 5G QUICK START GUIDE 4
Setting up your MiFi X PRO
Setting up with the Inseego Mobile app
You can set up and manage your MiFi with the Inseego Mobile app:
1. Scan the QR code to install from AppStore or Google Play.
2. Follow the in-app instructions to set up your MiFi.
3. Use the app to configure and customise your MiFi.
Installing a SIM Card
1. Insert a fingernail at the edge of the battery cover and lift and remove the
battery cover. Set the cover aside.
2. Remove the battery from the battery compartment.

MiFi X PRO 5G QUICK START GUIDE 5
3. Lift the SIM access tab by placing a fingernail underneath the white arrow
and lifting the tab up and to the right.
NOTE: The MiFi X PRO 5G supports only Nano SIM cards. To prevent damage to
the SIM slot, please select the correct SIM for this device.
4. If necessary, remove the SIM card from the outer card, being careful not to
touch the gold-coloured contacts.
5. Slide the SIM card into the slot notch first, with the contact points
facing down. Close the SIM access tab, place the battery in the battery
compartment and replace the cover. The SIM card MUST remain in the SIM
card slot when in use.
Turning your MiFi on/off
IMPORTANT: Before you use your MiFi, charge the battery for at least four hours
to ensure a full initial charge.
•To turn your MiFi on, press and hold the Power button for three seconds.
•To turn it off, press and hold the Power button for three seconds until you
see the Powering Off screen. Then select Shutdown and tap OK.
•Press and release the Power button to wake up the display.

MiFi X PRO 5G QUICK START GUIDE 6
Finding the Wi-Fi name and password
Tap Wi-Fi Name/Password on the Home screen.
The information for your MiFi primary network is shown. Swipe left to see the
info for your guest network.
Connecting to the Internet
On your Wi-Fi capable device, open the list of available Wi-Fi networks. Select
the MiFi primary or guest network and enter the password.
Managing Wi-Fi networks and connections
Your MiFi X PRO 5G has two Wi-Fi networks, primary and guest, and lets you
connect up to 32 Wi-Fi capable devices. For added security, share your guest
network instead of your primary network.
The guest network is off by default. You can turn it on from either the
touchscreen or the Admin web UI by assigning it a band in Wi-Fi Settings >
Band Selection (see Accessing advanced settings).
Accessing advanced settings
You can access advanced settings and manage your MiFi from the Admin web
UI:
1. Connect your device to the primary network (see Connecting to the
Internet).

MiFi X PRO 5G QUICK START GUIDE 7
2. Open a web browser on your connected device and enter
http://192.168.1.1.
3. Sign in with the Admin password. When you first get your MiFi X PRO 5G,
this is the same as your primary network’s password (see Finding the Wi-Fi
name and password).
Monitoring data usage
You can track your data usage through your My Telstra application - available for
download from Google Play and the Apple Store.
You can also see current usage details on the Home screen of your MiFi, or by
tapping Menu > Data Usage.
Resetting your MiFi
You can reset your Inseego MiFi to factory settings from the touchscreen or from
the Admin web UI.
NOTE: Resetting your MiFi will disconnect devices and reset network names and
passwords.
To reset using the reset hole:
1. Make sure your MiFi is on.
2. Remove the battery cover from the back of your MiFi.
3. Insert an unfolded paper clip into the Reset hole and press until the MiFi
screen shows MiFi Resetting.

MiFi X PRO 5G QUICK START GUIDE 8
Additional information
Inseego Mobile app requirements
Smartphone or device on iOS 13 or above, or Android 9.0 or above.
System requirements
Any device with Wi-Fi capability and an Internet browser.
Your MiFi X PRO 5G is compatible with all major operating systems.
Support and more
Contact your service provider for assistance.
Documentation for your MiFi is available online. Go to
https://inseego.com/download/mifixpro-userguide-telstra.pdf. Or, from the MiFi
Admin web UI, select Help > Customer Support > User Guide.
PN 14965407-002 R1
© 2022 Inseego Corp. All Rights Reserved