Insignia KY900 Series User manual

www.insigniashowers.com Last Modied: 20/12/2023
INSTALLATION MANUAL
KY900
Sauna Series
30 Day Technical Support:
Call 01908 317512 and request technical support for aiding your
installaon.
Replacements Parts: Inside of your warranty period visit:
hps://www.insigniashowers.com, click support and make a
warranty claim.
Spares/Replacements Parts: Outside of your warranty period visit
hps://www.insigniashowers.com/replacement-parts.html
ATTENTION INSTALLERS:
These instrucons must be
le with the customer CHECK ALL CONTENTS BEFORE BUILD COMMENCES. NO RETURNS CAN BE MADE
ONCE THE BUILD HAS STARTED AS IT IS DEEMED ACCEPTANCE OF PRODUCT!

www.insigniashowers.com Last Modied: 20/12/2023
02
Contents
Thank you for your purchase 3
Electrical & Tool requirements 4
Box contents 5
Side Panel Connecon 6
Le Side Panel to Back Panel Connecon 7
Floor Posioning 8
Heater Cover Install 9
Seat Install 10
Right Side Panel Connecon 13
Front Frame Install 14
Door Handle Install 15
Roof Install and Electrics Connecons 16
Screwing the Roof into Posion 17
Securing the Roof Wires into Posion 18
Control Panel Instrucons 19
Sauna Room Safety Guide 21
WEEE Compliance Statement 22

www.insigniashowers.com Last Modied: 20/12/2023
03
Thank you for your recent purchase of an Insignia Sauna. Please read this booklet with
great care to ensure you get the best out of your build and have a Sauna that will last
for many years to come! Like everything, in order to obtain a rst class product that
will serve you well for many years, the eort and correctness put into the assembly
will reect in the quality of your nish.

www.insigniashowers.com Last Modied: 20/12/2023
04
• Scissors
• Knife
• Spirit Level
• Tape Measure
• Philips Screwdriver
• Electric Drill
• Safety Gloves
• Safety Glasses
Tools Required
Voltage Rang 190-240AC
Frequency Rang 50Hz
Power Rang 2730 Was
Amperage 11.4 Amps
Indoor saunas with power consumption under 3KW have been designed for easy installation,
allowing for a simple plug-in directly into a standard household power circuit.
Installation Notes:
1. (Recommended) Consult with a qualified Electrician before connection to assess suitability.
2. Ensure all parts are connected safely and correctly.
Always use protection against electrical surges by means of an RCD unit.
If you are uncertain about the installation process or have any questions, please feel free to reach
out to our friendly technical support for general advice. For anything more specific to the electric
installation, please consult with a certified electrician.
Electrical Requirements Model KY900

www.insigniashowers.com Last Modied: 20/12/2023
05
What’s in the Boxes?
Contents Quanty
Back Wall
Floor
Roof
Side panel (two pieces)
Side Panel Connectors (Top)
Side Panel Connectors (Boom)
Seat
Front Frame/Door
Door Handle
Heater Guard
Screw Pack
1
1
1
2
2
2
1
1
1
2
1
[ ]
[ ]
[ ]
[ ]
[ ]
[ ]
[ ]
[ ]
[ ]
[ ]
[ ]
VERY IMPORTANT
Have you got everything? If not please contact the Insignia directly on 01908 317 512.
Remember NEVER book your tradesman unl everything has arrived, been checked and is
present. No replacement/missing parts can be obtained free of charge during or aer the
build. Any claims can only be within the mescale permied (48 hours aer delivery) and
always BEFORE build.

www.insigniashowers.com Last Modied: 20/12/2023
06
Step 1 — Placing the side panel pieces together
The cut-outs are for the top
of the panel, for the wires
to slot through to the roof.
20 x 60mm Screws
Slide the two panel pieces
together and slot the top
and boom wood securing
pieces in posion.
Tip: Lay the panels at on
their back to connect.
Repeat for the other side panel

www.insigniashowers.com Last Modied: 20/12/2023
07
Step 2 — Le side panel and back panel connecon
Li the side panel, locate xings and once
connected, push down to secure into posion.

www.insigniashowers.com Last Modied: 20/12/2023
08
Step 3 — Slide the oor into posion
Ensure the plate heater is towards
the front. Remove the wood
securing it in posion for transit and
the packaging.

www.insigniashowers.com Last Modied: 20/12/2023
09
Step 4 — Installing the heater covers
Connect the lights then align the
heater cover using a spirit level
and connect screw in posion
using ST50 Screws
Do this for both sides.
8 x 50mm Screws

www.insigniashowers.com Last Modied: 20/12/2023
10
Step 5 — Installing the seat
16 x 30mm Screws