Insignia KYS1450 Series User manual

www.insigniashowers.com Last Modied: 20/12/2023
INSTALLATION MANUAL
KYS1450
Shower/Sauna Series
30 Day Technical Support:
Call 01908 317512 and request technical support for aiding your
installaon.
Replacements Parts: Inside of your warranty period visit:
hps://www.insigniashowers.com, click support and make a
warranty claim.
Spares/Replacements Parts: Outside of your warranty period visit
hps://www.insigniashowers.com/replacement-parts.html
ATTENTION INSTALLERS:
These instrucons must be
le with the customer CHECK ALL CONTENTS BEFORE BUILD COMMENCES. NO RETURNS CAN BE MADE
ONCE THE BUILD HAS STARTED AS IT IS DEEMED ACCEPTANCE OF PRODUCT!

www.insigniashowers.com Last Modied: 20/12/2023
02
Contents
Thank you for your purchase 3
Electrical & Tool requirements 4
Box contents 5
Levelling the Tray 6
Connecng the Column and Glass Panel Brackets 7
Installing the Column 8
Installing the Right Back Panel 9
Installing the Right Side Panel 11
Installing the Le Back Panel and Side Panel 12
Installing the Front Fixed Panels 13
Installing the Roof 14
Installing the Door 15
Installing the Sauna Heaters 17
Installing the Accessories 18
Water Valve Connecons 20
Power Connecons 21
Control Panel Instrucons 22
Steam Room/Sauna Room Safety Guide 23
WEEE Compliance Statement 24

www.insigniashowers.com Last Modied: 20/12/2023
03
Thank you for your recent purchase of an Insignia Sauna. Please read this booklet with
great care to ensure you get the best out of your build and have a Sauna that will last
for many years to come! Like everything, in order to obtain a rst class product that
will serve you well for many years, the eort and correctness put into the assembly
will reect in the quality of your nish.

www.insigniashowers.com Last Modied: 20/12/2023
04
• Scissors
• Knife
• Spirit Level
• Tape Measure
• Philips Screwdriver
• Spanner
• Electric Drill
• 2.5mm Allen Key
• 4mm Allen Key
• Safety Gloves
• Safety Glasses
Tools Required
Voltage Rang 220-240AC
Frequency Rang 50Hz
Power Rang 1820 Was Sauna
3020 Was Steam Shower
NOTE : Sauna and Shower electronics—prevent use together
Max individual current draw 12.6 amps
Total Amperage 20.17 amps
Waterproof grade IPX4
Always consult a qualified Electrician before connection as to suitability Always Obtain Relevant
Certification (minor Works Part P etc) This Sauna must comply with current UK bathroom regulations
Your electrical contractor will understand ALL legal requirements of connection before undertaking any
work or installation.
UNDER NO CIRCUMSTANCES UNDERTAKE THIS YOURSELF. ALWAYS USE AN ELECTRICAL
CONTRACTOR AND ENSURE LEGAL CERTIFICATION IS GIVEN ON COMPLETION
Note for electrician: 1) Connect within current laws and IP directives. 2) (Preferred) Wire into isolated
fused feed connecting directly to the house consumer/service box. Always use protection against
electrical surge. Your shower should be treated the same as a home computer. A surge protector
should eradicate the possibility of burn out. Subject to connection type, electrical work needs to be
signed off by a fully qualified operative by law. Failure to adhere to this will not only void your
electrical warranty for your sauna but could void your house insurance.
Electrical Requirements Model KYS1450

www.insigniashowers.com Last Modied: 20/12/2023
05
What’s in the Boxes?
Contents Quanty
Heater
Heater Cover
Column
Rack?
Aluminium corner posts
Stool
Hand Shower + Riser Rail
Glass Shelf
Mirror
Tray
Roof
Back Glass Panel
Front Fixed Glass Panel
Side Panel
Door
Screw pack
4
4
1
1
4
2
1
1
1
1
1
2
2
2
1
1
[ ]
[ ]
[ ]
[ ]
[ ]
[ ]
[ ]
[ ]
[ ]
[ ]
[ ]
[ ]
[ ]
[ ]
[ ]
[ ]
VERY IMPORTANT
Have you got everything? If not please contact the
Insignia directly on 01908 317 512. Remember NEVER
book your tradesman unl everything has arrived,
been checked and is present. No replacement/missing
parts can be obtained free of charge during or aer
the build. Any claims can only be within the mescale
permied (48 hours aer delivery) and always
BEFORE build.

www.insigniashowers.com Last Modied: 20/12/2023
06
Step 1 — Levelling the tray
Level the tray by using a spirit level and then
changing the elevaon of the legs by screwing
clockwise or counter-clockwise.

www.insigniashowers.com Last Modied: 20/12/2023
07
Step 2 — Connecng the column and glass panel brackets
Take the glass brackets and connect to the tray, with the screw ghtening connecon
facing inside the tray. Locate the pre drilled holes for connecon. Repeat for all brackets.
Then take the 90 degree ‘L’ shaped bracket and connect ready for the column.

www.insigniashowers.com Last Modied: 20/12/2023
08
Step 3 — Installing the Column
Take the rubber seal without holes and place on the tray. Slot the
column into posion, ensuring you connect all power cables as you align
the column. Once aligned, screw the column to the ‘L’ bracket.

www.insigniashowers.com Last Modied: 20/12/2023
09
Step 4 — Installing the right back panel
Ensure you place a seal along the boom of the glass panel rst. Then
simply slot the glass panel into the bracket and secure in place with the bolt.

www.insigniashowers.com Last Modied: 20/12/2023
10
Step 5 — Installing the right back panel connued
Between ALL glass and aluminium framework connecons, place a ribbed
rubber seal ghtly to protect the glass and secure in posion
Along the corner of the glass, place the 90 degree aluminium framework connector,
angled to allow the side panel to be inserted along the right hand side of the shower.

www.insigniashowers.com Last Modied: 20/12/2023
11
Step 6 — Installing the right side panel
Ensure you place a seal along the boom of the
glass panel rst. Then simply slot the glass panel
into the bracket and secure in place with the
bolt. Also ensure you feed the panel into the 90
degree corner upright.
Once installed, slot in the seal to protect and
secure.

www.insigniashowers.com Last Modied: 20/12/2023
12
Step 7 — Installing the le back panel and side panel
Repeat the process from the previous pages.
Ensure you place a seal along the boom of the
glass panel rst. Then simply slot the glass panel
into the bracket and secure in place with the
bolt.
Once installed, slot in the seal to protect and
secure.

www.insigniashowers.com Last Modied: 20/12/2023
13
Step 8 — Installing the front xed glass
Repeat the process from the previous pages.
Ensure you place a seal along the boom of the
glass panel rst. Then simply slot the glass panel
into the bracket and secure in place with the
bolt.
Once installed, slot in the seal to protect and
secure.

www.insigniashowers.com Last Modied: 20/12/2023
14
Step 9 — Installing the roof
Bolt kit x14
Bolt kit order = Cap, Bolt, Spacer, Washer, Glass
Protector, Washer, Nut.
Connect the roof to all panels.
Foam strip x1 Place Foam Strip around the roof to protect the glass
v
v
v
v
v
v
v
v
v
v
v
v
v
v

www.insigniashowers.com Last Modied: 20/12/2023
15
Step 10 — Installing the door handle and door hinges
Use the Allen key provided to
take the hinge apart. Use glass
protecng spacer either side of
the glass and connect the bolts
from the inside of the shower.
Use the Allen key provided to
take the door handle apart.
When connecng ensure you
have the glass protecng spacer
on either side of the glass.

www.insigniashowers.com Last Modied: 20/12/2023
16
Step 11 — Installing the door
Push magnec door
seals on to the door
and xed glass panel.
Li the door into posion and hold steady whilst connecng the hinges. To
align, slacken o the hinge slightly, adjust the door posion and then re-
ghten. Repeat this process unl the door shuts perfectly.
Push the boom door seal onto the door.
Push the xed glass seal onto the xed glass.

www.insigniashowers.com Last Modied: 20/12/2023
17
Step 12 — Installing the sauna heaters
Install all heater brackets with the
hook on the inside of the shower,
ALWAYS facing upwards. Also use the
round glass protectors over each bolt.
The heater covers simply
slot on and clip into
posion.
Ensure each corner is sing at 90
degrees and slot the heater onto the
brackets. Tap the heater down with a
mallet to lock them into posion.
Ensure the connecon wire is fed up
inside the heater for a ush t.
Connect the wires under the
heaters. Feed the wire up into
the heater to ensure a ush
ng on the next step.
Use the chrome nished
caps to ll in the back of
all glass securing blocks
and both door hinges.

www.insigniashowers.com Last Modied: 20/12/2023
18
Step 13 — Installing the Accessories
Using the accessories connecon
bolts, screw the accessories in
posion and secure from the rear
using washers and nuts.

www.insigniashowers.com Last Modied: 20/12/2023
19
Step 14 — Installing the stools
Using the Allen key provided, screw the legs to the stools and place in the shower.

www.insigniashowers.com Last Modied: 20/12/2023
20
Step 15 — Water Valve Connecons