Insignia MXSO1700 User manual

Installation Guide
MXSO1700 Sauna
Should you require additional assistance with the
installation of your product,
please call 01908 317512
or email
[e-mail].

www.insigniashowers.com Last Modied: 29/06/2022
INSTALLATION MANUAL
MXOS1700
Outdoor Sauna Series
ATTENTION INSTALLERS:
These instrucons must be
le with the customer
30 Day Technical Support:
Call 01908 317512 and request technical support for aiding your
installaon.
Replacements Parts: Inside of your warranty period visit:
hps://www.insigniashowers.com, click support and make a
warranty claim.
Spares/Replacements Parts: Outside of your warranty period visit
hps://www.insigniashowers.com/replacement-parts.html
CHECK ALL CONTENTS BEFORE BUILD COMMENCES. NO RETURNS CAN BE MADE
ONCE THE BUILD HAS STARTED AS IT IS DEEMED ACCEPTANCE OF PRODUCT!

www.insigniashowers.com Last Modied: 29/06/2022
02
Contents
Thank you for your purchase 3
Electrical & Tool requirements 4
Box contents 5
Creang the base 6
Installing the back right upright 7
Installing the back panel 8
Installing the back le upright 9
Installing the right side panel 10
Installing the right front upright 11
Installing the le side panel 12
Installing the front le upright 13
Electric box install 14
Installing the top frame 15
Floor placement 16
Placing the bench front 17
Under seat support frame install 18
Bench seat install 19
Back rest install 20
Installing the xed glass panel 21
Installing the inner roof 22
Installing the big roof 23
Installing the heater and heater guard 24
Installing the door handle 25
Installing the door 26
Installing the accessories 27
Control Panel Instrucons/Operaon 28
Before First Use—IMPORTANT 31
Sauna Room Safety Guide 32
WEEE Compliance Statement 33

www.insigniashowers.com Last Modied: 29/06/2022
03
Thank you for your recent purchase of an Insignia Sauna. Please read this booklet with
great care to ensure you get the best out of your build and have a Sauna that will last
for many years to come! Like everything, in order to obtain a rst class product that
will serve you well for many years, the eort and correctness put into the assembly
will reect in the quality of your nish.
Please note: Like all timber products, such as garden sheds and fencing, garden
saunas require full exterior wood weatherproofing treatment after installation to
ensure long life and prevention of water ingress.

www.insigniashowers.com Last Modied: 29/06/2022
04
•Scissors
•Knife
•Spirit Level
•Tape Measure
•Philips Screwdriver
•Electric Drill
•Safety Gloves
•Safety Glasses
Tools Required
Power Rating 4.5KW
Always consult a qualied Electrician before connecon as to suitability
Your electrical contractor will understand ALL legal requirements of connecon before
undertaking any work or installaon.
UNDER NO CIRCUMSTANCES UNDERTAKE THIS YOURSELF WITHOUT CONSULTATION
The MXOS 1700 is 240 volt compliant. Due the nature of use and current UK legislaon,
connecon from the house to sauna must always be completed by a qualied electrical
contractor. In all circumstances our recommendaon is direct supply your house service board.
On compleon always request a copy of a Minor Works Cercate showing completed required
connecon and circuit tests. In many cases this will be a legal requirement.
Electrics

www.insigniashowers.com Last Modied: 29/06/2022
05
What’s in the Boxes?
Contents Quanty
Back Panel
Le Panel
Right Panel
Fixed Glass
Door
Inner Roof
Big Roof
Sauna Heater
Heater Guard
1
1
1
1
1
1
1
1
1
[ ]
[ ]
[ ]
[ ]
[ ]
[ ]
[ ]
[ ]
[ ]
VERY IMPORTANT
Have you got everything? If not please contact the Insignia directly on 01908 317 512.
Remember NEVER book your tradesman unl everything has arrived, been checked and is
present. No replacement/missing parts can be obtained free of charge during or aer the
build. Any claims can only be within the mescale permied (48 hours aer delivery) and
always BEFORE build.
Contents Quanty
Light
Door Handle
Sauna Rocks
Backrest
Bench Top
Bench Vercal Supports
Under Bench Support
Screw Pack
1
1
1
1
4
4
4
1
[ ]
[ ]
[ ]
[ ]
[ ]
[ ]
[ ]
[ ]

www.insigniashowers.com Last Modied: 29/06/2022
06
Step 1 — Creang the base
Create a square using the 4 boom struts.
Note: The front strut has a groove cut out
for the front xed glass panel. Make sure
this strut is at the front of the square.

www.insigniashowers.com Last Modied: 29/06/2022
07
Step 2 — Installing rear right upright
There will be 3 screw connecons on two faces of
the upright. They should face towards the back
boom strut and right boom strut.

www.insigniashowers.com Last Modied: 29/06/2022
08
Step 3 — Installing the back panel
Li the back panel and slide the brackets over the
screw xings and lock into posion. Also ensure you
push the panel down onto the back boom strut and
ensure they lock together.

www.insigniashowers.com Last Modied: 29/06/2022
09
Step 4 — Installing the back le upright
Tilt the back panel up in order to get the back le upright to slot
into the brackets. Connect and push the right back upright down
and secure into posion.
There will be 3 screw connecons on two faces of the upright. They
should face towards the back boom strut and le boom strut.

www.insigniashowers.com Last Modied: 29/06/2022
10
Step 5 — Installing the right side panel
Li the side panel and slide the brackets over the screw xings and
lock into posion. Also ensure you push the panel down onto the
right boom strut and ensure they lock together.

www.insigniashowers.com Last Modied: 29/06/2022
11
Step 7 — Installing the right front upright
Slot the front right upright onto the side panel and push
down to secure in posion.

www.insigniashowers.com Last Modied: 29/06/2022
12
Step 8 — Installing the le side panel
Li the le side panel and slot down onto the
back le upright and locking in place on the
boom le strut.

www.insigniashowers.com Last Modied: 29/06/2022
13
Step 9 — Installing the front le upright
Slot the front le upright onto the side panel and
push down to secure in posion.

www.insigniashowers.com Last Modied: 29/06/2022
14
Step 10 — Electric box
The electrical box (below) should be housed in the sauna,
underneath the back bench on the oor. Install electrical
connecons. Partner up all corresponding wires which are
denoted by matching sckers from the box to the back/
right panels.
The electrical box should be placed with the items facing down and
the lid facing up.
Note: It is recommended to make this connecon now
with full access.

www.insigniashowers.com Last Modied: 29/06/2022
15
Step 19 — Installing the top frame
Locate the top framework into posion. Secure loosely, as you
need manoeuvrability of the framework to insert the xed glass
panel.

www.insigniashowers.com Last Modied: 29/06/2022
16
Step 11 — Placing the oor in posion
The cut-outs in each front corner go around the front uprights.
Ensure you place the oor in it’s correct orientaon.

www.insigniashowers.com Last Modied: 29/06/2022
17
Step 13 — Placing the front of the bench
Place the front of the bench ght up to the oor.

www.insigniashowers.com Last Modied: 29/06/2022
18
Step 17 — Placing under seat support frame
• Using ST40 Screws locate the large frame support to the back
of the sauna.
• From the inside screw the base of all bench front to the
adjoining panels.
ST40 x 26

www.insigniashowers.com Last Modied: 29/06/2022
19
Step 18 — Placing the bench seat in posion
Locate the bench seat into posion by placing it onto
the under support frame.