Insignia MXOS4000 User manual

Installation Guide
MXOS4000
Outdoor Sauna
Should you require additional assistance with the
installation of your product,
please call 01908 317512
or email
[e-mail].

INSTALLATION MANUAL
MXOS4000
Ourdoor Sauna
ATTENTION INSTALLERS:
These instrucons must be
le with the customer
30 Day Technical Support:
Call 01908 317512 and request technical support
for aiding your installaon.
Replacements Parts: Inside of your warranty period
visit:
hps://www.insigniashowers.com, click support
and make a warranty claim.
Spares/Replacements Parts: Outside of your
CHECK ALL CONTENTS BEFORE BUILD COMMENCES. NO RETURNS CAN BE MADE
ONCE THE BUILD HAS STARTED AS IT IS DEEMED ACCEPTANCE OF PRODUCT!
24/03/2023
1

Contents
Thank you for your purchase 3
Electrical & Tool requirements 4
Box contents 5
Creang the base 16
Installing Corner Posts 18
Installing the Boom Beams 20
Installing the Floor Boards 21
Installing the Back and Side Walls 22
Installing the Front Fixed Glass 23
Installing the Top Beams 24
Installing Ceiling 25
Connecng the Electrics 26
Installing the Top Panels 27
Installing the Seat Supports 28
Installing the Benches 31
Installing the Back Supports 32
Installing the Door 33
Building the Roof Structure 34
Maintenance 37
Control Panel Instrucons/Operaon 38
Before First Use—IMPORTANT 41
Sauna Room Safety Guide 42
WEEE Compliance Statement 43
24/03/2023
2

Thank you for your recent purchase of an Insignia Sauna. Please read this booklet with
great care to ensure you get the best out of your build and have a Sauna that will last
for many years to come! Like everything, in order to obtain a rst class product that
will serve you well for many years, the eort and correctness put into the assembly
will reect in the quality of your nish.
24/03/2023
3

•Scissors
•Knife
•Spirit Level
•Tape Measure
•Philips Screwdriver
•Electric Drill
•Safety Gloves
•Safety Glasses
Tools Required
380 volt ready for 3 phase connection
13,500 watts @ 15.8 amps 380 volt
Always consult a qualied Electrician before connection as to suitability
Your electrical contractor will understand ALL legal requirements of connection
before undertaking any work or installation.
UNDER NO CIRCUMSTANCES UNDERTAKE THIS YOURSELF WITHOUT CONSULTATION
The MXOS 4000 has provision for both 240 and 380 volts. The 13.5KW stove has facility for both
connecng opons. Your qualied electrician will advise on the method they feel bests suits your
situaon and electrical supply along with any potenal benet either may have.
Electrics
24/03/2023
4

What’s in the Boxes?
Contents Quantity
Back Panel
Le Panel
Right Panel
Fixed Glass
Door
Inner Roof (Halves)
Big Roof
Sauna Heater
1
1
1
2
1
2
1
1
[ ]
[ ]
[ ]
[ ]
[ ]
[ ]
[ ]
[ ]
VERY IMPORTANT
Have you got everything? If not please contact the Insignia directly on 01908 317 512.
Remember NEVER book your tradesman unl everything has arrived, been checked and is
present. No replacement/missing parts can be obtained free of charge during or aer the
build. Any claims can only be within the mescale permied (48 hours aer delivery) and
always BEFORE build.
Contents Quantity
Door Handle
Sauna Rocks
Backrests
Bench Top
Bench Vercal Supports
Under Bench Support
Screw Pack
1
1
2
4
4
4
1
[ ]
[ ]
[ ]
[ ]
[ ]
[ ]
[ ]
24/03/2023
5

1. Rate Voltage: AC380V, 50HZ
2. Power of heater: 13.5KW
3. Size: 3000*3000*3000mm
TECHNICAL PARAMETERS
24/03/2023
6

FRONT VIEW
WHOLE VIEW
TOP VIEW
Product Diagram
24/03/2023
7

Lam p （12V）
Sp eaker
Con tro l pan el Tem per atu re Se nso r
Ant enn a
Feedback line
Ele ctr ici ty bo x
Pow er li ne
Syn chr oni zer Transformer
Res erv ed la mp li ne（op tio nal）
Sup ply l ine s
Sau na st ove l ine
Col orf ul li ght （12 V）
Electric Diagram in Sauna Room Part
24/03/2023
8

1.1
1.2
1.3
1.4
2.1
2.2
2.3
2.4
2.5
2.6 2.7
2.8
3.1
3.2
3.3
4.1~4.5
----1.1~1.4
----2.1~2.8
----3.1~3.3
----4.1~4.5
----5.1~5.5
upright
outer beam
mid long beam
front short beam
ack short beam
Schematic Diagram
24/03/2023
9

7.1
7.2
7.3
7.4
----7.1~7.4
up baseboard
24/03/2023
10

8.1
8.2
8.4
8.3
8.5
9.1
9.2
9.3
8.6
8.7 9.4~9.5
----8.1
----8.2
---8.3
---8.4
----8.5
----8.6
----8.7
----9.1
-----9.2
----9.3
-----9.4~9.5
-----9.6~9.7
midside up-wall
midsdie mid wall
midside down wall
rightside up wall
rightside down wall
leftside up wal
leftside down wall
rightside fix-glass
glass door
leftside fix-glass
left & Right Door frame material
up & Down Door frame material
9.6~9.7
24/03/2023
11

10.1
10.2
10.3
10.4
10.5
10.6
10.7
----10.1~10.4
----10.5~10.7
inside top-board
upside board
24/03/2023
12

11.6
11.1
11.2
11.3
11.4
11.5
12.1
12.2
12.4
----11.1
----11.2
----11.3
----11.4
----11.5
----12.1
----12.2
----12.4
13.1
13.2
13.3
13.4
13.5
----13.1
----13.2
----13.3
----13.4
----13.5
14.2
14.1
----14.1
Upper plate
upper right corner board
right upper plate
lower right corner board
right lower plate
mid underplate
mid Upper seat frame
right upper seat frame
mid lower seat frame
right lower seat frame
mid upper baffle
right upper damper
Right lower baffle
mid lower baffle
right side armrest
mid backrest
rightside backrest
----11.6
----12.6
12.6
----14.2
24/03/2023
13

15.1~15.4
15.6
15.5
15.8
15.7
15.10
15.9
16.1
16.2
16.3
16.4
16.5
16.6
16.7
16.8
17.1
17.2
17.3
17.4
17.5
17.6
17.7
17.818.118.218.318.4
18.5
18.6
18.7
18.8
----15.1~15.4
----15.5
----15.6
----15.7~15.10
---16.1~16.8
---17.1~17.8
---18.1~18.8
middle big tripod
leftside tripod
rightside tripod
hypotenuse tripod
front broadside support
backside broadside support
left &rigth broadside support
24/03/2023
14

20.2
20.7
20.8
20.1
22.5~22.622.7~22.8
----20.1~20.8
----21.1
----21.2~21.5
----22.1~22.4
----22.5~22.8
shrouding
upper lifting
roadside aluminium
middle aluminium
edge sealing
21.3
20.620.5
20.3
20.4
22.3
21.2
21.1
22.4
24/03/2023
15

To dig a hole size 600*600*200mm;Reinforced
the hole by steel
girders;
Cover the steel girders by cement
&sand.
The finished size of hole will be
500*5000*140mm.The surface of
hole must be level.
Put the pillar with bottom cap
inside the hole & adjust the bottom
cap height .The adjustable height will
be 10cm;
After the adjustment, fill cement
into the hole to fix the bottom cap &
pillar.
INSTALLATION DIAGRAM
24/03/2023
16

Building pillars. Firstly, screw the
bottom cap on pillars, and put them on the ground per outdoor sauna size
1.1
1.2
1.3
1.4
24/03/2023
17

Firstly, Screw small bottom cap on
2.5, legs.
Secondly, Lock bottom
beam into pillars.
Install Harvia Xenio control panel
on pillar & pull out the panel cable
2.5
2.7
2.6
2.8
2.8
2.5,2.6 2.7,2.8,
24/03/2023
18

Secondly,locked 3.1,3.2,3.3 middle bottom beams
into C1, C3 bottom beam
3.1
3.2
3.3
24/03/2023
19