Insignia KY003 Series User manual

www.insigniashowers.com Last Modied: 03/10/2023
INSTALLATION MANUAL
KY003 Infrared
Sauna Series
30 Day Technical Support:
Call 01908 317512 and request technical support for aiding your
installaon.
Replacements Parts: Inside of your warranty period visit:
hps://www.insigniashowers.com, click support and make a
warranty claim.
Spares/Replacements Parts: Outside of your warranty period visit
hps://www.insigniashowers.com/replacement-parts.html
ATTENTION INSTALLERS:
These instrucons must be
le with the customer CHECK ALL CONTENTS BEFORE BUILD COMMENCES. NO RETURNS CAN BE MADE
ONCE THE BUILD HAS STARTED AS IT IS DEEMED ACCEPTANCE OF PRODUCT!

www.insigniashowers.com Last Modied: 03/10/2023
02
Contents
Thank you for your purchase 3
Electrical & Tool requirements 4
Box contents 5
Screw Pack Contents 6
Sauna Le Panel and Back Panel Install 7
Bench Heater Install 8
Bench Front Install 9
Heater Wires Install 10
Right Panel Install 11
Bench Cover Install 12
Back Rest Install 13
Glass Panels Install 14
Heater Cover Install 15
Front Panels Install 16
Roof Install 17
Door Cushioning Strip Install 18
Roof Cover Install 19
Door Handles Install 20
Door Magnet Brackets Install 21
Securing the Electrics 22
Electrical Connecons 23
Sauna Control Panel Instrucons 24
Remote Control Instrucons 26
Sauna Room Safety Guide 27
WEEE Compliance Statement 28

www.insigniashowers.com Last Modied: 03/10/2023
03
Thank you for your recent purchase of an Insignia Sauna. Please read this booklet with
great care to ensure you get the best out of your build and have a Sauna that will last
for many years to come! Like everything, in order to obtain a rst class product that
will serve you well for many years, the eort and correctness put into the assembly
will reect in the quality of your nish.

www.insigniashowers.com Last Modied: 03/10/2023
04
•Scissors
•Knife
•Spirit Level
•Tape Measure
•Philips Screwdriver
•Electric Drill
•Safety Gloves
•Safety Glasses
Tools Required
Voltage Rang 220-240AC
Frequency Rang 50Hz
Power Rang 2297 Was Sauna
Total Amperage 9.6 amps
Indoor saunas with power consumpon under 3KW have been designed for easy installaon,
allowing for a simple plug-in directly into a standard household power circuit.
Installaon Notes:
1. (Recommended) Consult with a qualied Electrician before connecon to assess
suitability.
2. Ensure all parts are connected safely and correctly.
Always use protection against electrical surges by means of an RCD unit.
If you are uncertain about the installaon process or have any quesons, please feel
free to reach out to our friendly technical support for general advice. For anything more
specic to the electric installaon, please consult with a cered electrician.
Electrical Requirements Model KY003

www.insigniashowers.com Last Modied: 03/10/2023
05
What’s in the Boxes?
Contents Quanty
Roof
Le Panel
Back Panel
Right Panel
Front Panel Glass Door
Slaed Back Rest
Floor Insert
Heater
Back Rest
1
1
1
1
1
1
1
1
1
[ ]
[ ]
[ ]
[ ]
[ ]
[ ]
[ ]
[ ]
[ ]
[ ]
VERY IMPORTANT
Have you got everything? If not please contact the Insignia directly on 01908 317 512.
Remember NEVER book your tradesman unl everything has arrived, been checked and is
present. No replacement/missing parts can be obtained free of charge during or aer the
build. Any claims can only be within the mescale permied (48 hours aer delivery) and
always BEFORE build.
Contents Quanty
Front Panels
Glass Panels
Door Handles
Door
Bench Front Cover
Bench Top Cover
Heat Cover
Bench Frame
Roof Cover
1
2
1
1
2
2
1
4
1
[ ]
[ ]
[ ]
[ ]
[ ]
[ ]
[ ]
[ ]
[ ]

www.insigniashowers.com Last Modied: 03/10/2023
06
Screw Pack Contents
Contents Quanty
ST 50mm Screws
ST 60mm Screws
ST 70mm Screws
ST 18mm Screws
ST 12mm Screws
Rubber pads for Heater
Wire Fixers
16
16
2
8
18
4
3
[ ]
[ ]
[ ]
[ ]
[ ]
[ ]
[ ]
VERY IMPORTANT
Have you got everything? If not please contact the Insignia directly on 01908 317 512.
Remember NEVER book your tradesman unl everything has arrived, been checked and is
present. No replacement/missing parts can be obtained free of charge during or aer the
build. Any claims can only be within the mescale permied (48 hours aer delivery) and
always BEFORE build.
Contents Quanty
Screw Covers
Rubber Glass Seals
Brackets
Door Cushioning Strips
Door Hinge
Door Magnet Brackets
2
1
2
3
1
1
[ ]
[ ]
[ ]
[ ]
[ ]
[ ]

www.insigniashowers.com Last Modied: 03/10/2023
07
Step 1 — Installing the Back and Le Panels
4 x ST50mm Screws
Slot the back panel and le panel in place on the
oor of the sauna and secure using the ST 50mm
screws.

www.insigniashowers.com Last Modied: 03/10/2023
08
Step 2 — Installing the Bench Heater
4 x ST18mm Screws
Using the ST 18mm screws found in the screw pack,
connect the bench heater behind the bench frame
as shown in the diagram.

www.insigniashowers.com Last Modied: 03/10/2023
09
Step 3 — Installing the Bench Front Panel
Once the heater is screwed into place on the back of the bench panel,
t it onto the sauna oor and connue to connect the wires as shown
in the next step.

www.insigniashowers.com Last Modied: 03/10/2023
10
Step 4 — Connecng the Heater Wires
Once the bench panel is in place, locate the splier in the
screw bag & connect the heater wires as shown in the dia-
gram. The earth wire is secured on the back of the heater onto
the pre-ed nut & bolt.

www.insigniashowers.com Last Modied: 03/10/2023
11
Step 5 — Installing the Right Panel
Repeang step 1, slot the right panel in place and secure
with the ST 50mm screws.
4 x ST50mm Screws

www.insigniashowers.com Last Modied: 03/10/2023
12
Step 6 — Installing the Side Rest
Once heater wires have been correctly connected,
place the bench seat in place on top on the bench.

www.insigniashowers.com Last Modied: 03/10/2023
13
Step 7 — Installing the Back Rest
2 x ST70mm Screws
Place the back rest onto the bench and secure
with the ST 70mm screws.
Please note to remove the protecve lm from
the heaters before covering with the back rest.
Cover the screws with the screw caps to conceal
the screw.

www.insigniashowers.com Last Modied: 03/10/2023
14
Step 8 — Installing the Glass Panels
Carefully slide the glass panels into the grooves of the
side panels and insert the rubber seals in between the
glass and wood.
(View from Above)

www.insigniashowers.com Last Modied: 03/10/2023
15
Step 9 — Installing the Heater Cover
Screw the brackets to the two panels which the heaters
are located on. They must screw onto the top and boom
of the heater as shown in the diagram.
Then hook the heater cover onto the brackets. Be sure to
remove the protecve lm o the heater before covering.
8 x ST 12mm Screws

www.insigniashowers.com Last Modied: 03/10/2023
16
Step 10 — Installing the Front Panels
Slide and slot the front panels onto the glass
panels and secure in place using the rubber
seals in between the wood and glass.

www.insigniashowers.com Last Modied: 03/10/2023
17
Step 11 — Installing the Roof
Carefully slot the roof into place and adjust unl secured.

www.insigniashowers.com Last Modied: 03/10/2023
18
Step 12 — Installing the Door Cushioning Strip
Remove the paper covering to reveal the scky
side of the strip and place on the top, le and
right of the door frame to allow a cushioning
when the glass door is installed.

www.insigniashowers.com Last Modied: 03/10/2023
19
Step 13 — Installing the Roof Cover
8 x ST18mm Screws
Carefully guide the door onto the hinges and screw securely using
the ST 18mm screws.

www.insigniashowers.com Last Modied: 03/10/2023
20
Step 14 — Installing the Door Handles
Taking the door handle screws and nuts apart, remove
the thread from the cylinder and ghten the nut
within the cylinder to the wooden handle with the
larger allen key. Secure with the smaller allen key.