Insignia KYS1820 User manual

www.insigniashowers.com Last Modied: 31/01/2022
INSTALLATION MANUAL
KYS1820
Sauna Series
30 Day Technical Support:
Call 01908 317512 and request technical support for aiding your
installaon.
Replacements Parts: Inside of your warranty period visit:
hps://www.insigniashowers.com, click support and make a
warranty claim.
Spares/Replacements Parts: Outside of your warranty period visit
hps://www.insigniashowers.com/replacement-parts.html
ATTENTION INSTALLERS:
These instrucons must be
le with the customer CHECK ALL CONTENTS BEFORE BUILD COMMENCES. NO RETURNS CAN BE MADE
ONCE THE BUILD HAS STARTED AS IT IS DEEMED ACCEPTANCE OF PRODUCT!

www.insigniashowers.com Last Modied: 31/01/2022
02
Contents
Thank you for your purchase 3
Electrical & Tool requirements 4
Box contents 5
Sauna Side Panel and Back Panel Install 6
Bench Install 7
Heater Cover Install 9
Shower Back Panel Install 10
Sauna/Shower Paron Install 11
Seal and Shower Corner Frame Install 12
Shower Side Panel Install 13
Shower Framework Install 14
Paron Door Install 15
Roof Install 16
Sauna Fixed Glass Panel Install 17
Door Install 18
Door Handle and Riser Rail Install 19
Steam Generator Install 20
Roof Securing and Wire Tidying 21
Stool Assembly 22
Water Valve Connecons 23
Electrical Connecons 24
Steam Control Panel Instrucons 25
Sauna Control Panel Instrucons 26
Sauna Room Safety Guide 27
WEEE Compliance Statement 28

www.insigniashowers.com Last Modied: 31/01/2022
03
Thank you for your recent purchase of an Insignia Sauna. Please read this booklet with
great care to ensure you get the best out of your build and have a Sauna that will last
for many years to come! Like everything, in order to obtain a rst class product that
will serve you well for many years, the eort and correctness put into the assembly
will reect in the quality of your nish.

www.insigniashowers.com Last Modied: 31/01/2022
04
• Scissors
• Knife
• Spirit Level
• Tape Measure
• Philips Screwdriver
• Electric Drill
• Safety Gloves
• Safety Glasses
Tools Required
Voltage Rang 220-240AC
Frequency Rang 50Hz
Power Rang 1597 Was Sauna
3020 Was Steam Shower
Total Amperage 19.24 amps
Always consult a qualied Electrician before connecon as to suitability
Always Obtain Relevant Cercaon (minor Works Part P etc)
This Sauna / Shower must comply with current UK bathroom regulaons
Your electrical contractor will understand ALL legal requirements of connecon before undertaking any work or
installaon.
UNDER NO CIRCUMSTANCES UNDERTAKE THIS YOURSELF
Note for electrician:
1) Connect within current laws and IP direcves.
2) (Preferred) Wire into isolated fused feed connecng directly to the house consumer/service box.
Always use protecon against electrical surge. Your shower should be treated the same as a home computer. A
surge protector should eradicate the possibility of burn out.
Subject to connecon type, electrical work needs to be signed o by a fully qualied operave by law. Failure to
adhere to this will not only void your electrical warranty for your sauna, but could void your house insurance.
Electrical Requirements Model KSY1820

www.insigniashowers.com Last Modied: 31/01/2022
05
What’s in the Boxes?
Contents Quanty
Roof
Floor/Tray Combo
Glass Side Panel
Middle Paron Glass Panel
Wooden Side Panel
Wooden Back Panel
Glass Back Panel
Accessories
Stool
Electric/Steam Column
Door Handle
Door Hinge
1
1
1
1
1
1
1
1
1
1
3
4
[ ]
[ ]
[ ]
[ ]
[ ]
[ ]
[ ]
[ ]
[ ]
[ ]
[ ]
[ ]
VERY IMPORTANT
Have you got everything? If not please contact the Insignia directly on 01908 317 512.
Remember NEVER book your tradesman unl everything has arrived, been checked and is
present. No replacement/missing parts can be obtained free of charge during or aer the
build. Any claims can only be within the mescale permied (48 hours aer delivery) and
always BEFORE build.
Contents Quanty
Bench Top
Bench Side
Bench Front
Heater Guard
Shower Frame/Fixed Glass
Sauna Corner Frame
Sauna Fixed Glass Panel
Middle Paron Door
Shower Door
Sauna Door
Shower Back Corner Connecon
1
1
1
1
1
1
1
1
1
1
1
[ ]
[ ]
[ ]
[ ]
[ ]
[ ]
[ ]
[ ]
[ ]
[ ]
[ ]

www.insigniashowers.com Last Modied: 31/01/2022
06
Step 1 — Installing the back and side panel (Sauna)
The panel connecon brackets are shown (above). Li panels and
locate the interlocking connecon brackets and push the panel down
to secure into posion. Locate both panels onto the wooden side of
the base.

www.insigniashowers.com Last Modied: 31/01/2022
07
Step 2 — Installing the bench
Locate the bench front and place between the two wooden struts on
the side panel to secure it into posion.
Locate the bench side and place between the wooden struts on the
back panel to secure into posion.
Locate all the wiring and connect together. Then locate
the power cable and connect to the back panel.

www.insigniashowers.com Last Modied: 31/01/2022
08
Step 2 — Installing the bench connued
On the inner side of the bench, locate
the 50mm screws and secure the bench
pieces to the oor and each other.
6 x 50mm Screws
Take the bench topper and locate into
posion on the secured bench supports.

www.insigniashowers.com Last Modied: 31/01/2022
09
Step 3 — Installing the heater cover
Locate the heater guard, align
with a spirit level and screw into
posion. The screw holes in the
heater guard are already present.
2 x 60mm Screws

www.insigniashowers.com Last Modied: 31/01/2022
10
Step 4 — Installing the Shower Back Panel
Locate the metal connecng frame and
posion against the back panel and
connect.. The cutout on the framework
piece must be at the top.
Locate the back panel for the shower
and place onto the back of the tray and
insert into the framework.

www.insigniashowers.com Last Modied: 31/01/2022
11
Step 5 — Installing the Sauna/Shower Paron
4 x 12mm Screws
Locate the central paron panel and
place in the middle of the tray to
separate the shower and sauna secons
and push it into the framework.
Screw into the pre-made holes in the
central frame connecon piece to secure
all panels into posion.

www.insigniashowers.com Last Modied: 31/01/2022
12
Step 6 — Installing the Seal and Corner Post
Locate the seal and insert between the
glass back panel and the middle
framework piece from the rear of the
sauna/shower.
Locate the right back corner post and
connect to the framework. Ensure the
grooved cut-out at the boom ts over
the tray and the edge.

www.insigniashowers.com Last Modied: 31/01/2022
13
Step 7 — Installing the Side Panel
Locate the right side panel and push into
the corner framework. Once inserted
screw into the pre-made holes (from the
rear) in the corner frame connecon piece
to secure the panel into posion.
4 x 12mm Screws

www.insigniashowers.com Last Modied: 31/01/2022
14
Step 8 — Installing the Shower Front Framework
8 x 12mm Screws
Locate the shower front
framework and place onto the
tray and connecng to the right
side panel and central paron
panel. Once inserted screw into
the pre-made holes (from
inside) to secure the panel into
posion.

www.insigniashowers.com Last Modied: 31/01/2022
15
Step 9 — Installing the Paron Door
To install the door paron, locate the top door wheels into the middle
paron framework. The boom door wheels are spring loaded, push the
spring buon down to lock the wheels into the lower framework channel and
release.
Top Wheels Boom Wheels

www.insigniashowers.com Last Modied: 31/01/2022
16
Step 10 — Installing the Roof and Shower Corner Finishing Post
Li the roof and place into posion. Do not screw anything yet.
Locate the back corner nishing post and connect to the rear corner of the
shower.

www.insigniashowers.com Last Modied: 31/01/2022
17
Step 11 — Installing the Sauna Fixed Glass Panel
Li the roof slightly and posion the sauna xed glass panel on the tray.
Locate all holes around the glass and align with the holes located in the roof,
tray and front le corner.
Internal View

www.insigniashowers.com Last Modied: 31/01/2022
18
Step 12 — Installing the Doors
Unscrew bolts and separate
Front View
Side View
Tighten
Li the door into posion and then x the door into the hinges. To realign
the door, loosen the bolts slightly, reposion and then reghten. Repeat
this process unl alignment is perfect. Do this for both doors.

www.insigniashowers.com Last Modied: 31/01/2022
19
Step 13 — Installing the Door Handles and Riser Rail
Locate all three door handles and unscrew the knobs on the
rear of the handle to separate the parts. Align with the pre-
drilled holes in the glass and reconnect the handle parts.
Ensure you have a rubber washer on either side to protect the
glass.
Locate the riser rail and remove the top
and boom secons by sliding them up
or down respecvely. Screw the riser rail
to the back panel and replace the top
and boom secons.

www.insigniashowers.com Last Modied: 31/01/2022
20
Step 14 — Steam Generator Column Installaon
4 x 12mm Screws
Locate the steam generator and electric box panel and
connect to the rear of the shower on the right rear corner
using ST 12 screws.