Insignia Noire90 User manual

www.insigniarange.com Last Modied: 07/01/2019
INSTALLATION MANUAL
Noire90
ATTENTION INSTALLERS:
These instrucons must be
le with the customer
30 Day Technical Support: 01908 226545
This service is only available to customers from
the day of delivery, please have your supplier’s
details and your postcode to hand before calling.
Replacements Parts: Inside of your warranty
period contact: www.insigniarange.co.uk/support
Spares/Replacements Parts: Outside of your
warranty period contact 0844 800 3069
WARRANTY REG NO: _______________________
To claim your full 5 year warranty, register your shower within 90 days at: www.insigniarange.co.uk/warranty
CHECK ALL CONTENTS BEFORE BUILD COMMENCES. NO RETURNS CAN BE MADE
ONCE THE BUILD HAS STARTED AS IT IS DEEMED ACCEPTANCE OF PRODUCT!

www.insigniarange.com Last Modied: 07/01/2019
02
Contents
Thank you for your purchase 3
Tips for assembly 4
Electrical/Pressure/Tool requirements 5
Box contents 6
Starng the installaon 8
Fing the Control Panel 10
Fing the Valve 11
Fing the Body Jets 12
Body Jet Pipework Installaon 13
Tri-Jet Steam Outlet Installaon 14
Hand Shower and Glass Shelf Installaon 15
Le Panel Installaon 16
Back Panel Seals Installaon 17
Back Panel Installaon 18
Right Panel Installaon 19
Front Fixed Glass Installaon 20
Roof Accessory Installaon 21
Roof Seal Installaon 22
Roof Installaon 23
Door Hinge Installaon 24
Door Handle Installaon 25
Door Installaon 26
Door Seal Installaon 27
Panel Base Seal Installaon 28
Mounng Steam Generator 29
AMI Installaon 30
Valve/Water Connecons 31
Control Panel Connecons 32
Steam Generator Connecons 33
Signing o your Shower 34
Control Panel Instrucons 35
Parts List 37

www.insigniarange.com Last Modied: 07/01/2019
03
Thank you for your recent purchase of an Insignia shower. Please read this booklet
with great care to ensure you get the best out of your build and have a shower that
will last for many years to come! Like everything, in order to obtain a rst class
product that will serve you well for many years, the eort and correctness put into the
assembly will reect in the quality of your nish.

www.insigniarange.com Last Modied: 07/01/2019
04
Before we start, here’s our 4 top ps which may assist you...
TIP 1—Building Your Shower
This product is suitable for a DIY build, providing you are condent in your DIY abilies. Please look through this build guide and decide
on whether you feel condent in undertaking this task. If you are not, seek the services of a professional and show them these
instrucons before hiring.
TIP 2—Hard Water
Due to the nature of this product we highly advise the purchase and ng of a water soener.
(Please note: limescale build up may cause damage to your shower and will not be covered under warranty)
TIP 3—Installaon
These showers are designed to be free standing and movable from their locaon should you have the need to replace anything.
ALWAYS USE Flexible braided water inlet pipes (not supplied) at least a metre long (not central heang plasc type!)
NEVER FIX with rigid pipes, NEVER FIX the unit to the wall or oor.
TIP 4—Sealing
When using Insignia’s RubberGum, please ensure the product does not come in contact with your silicone as this will cause the
RubberGum to fail and will not adhere as intended. Rubbergum is immediately waterproof and will gain addional strength over me.

www.insigniarange.com Last Modied: 07/01/2019
05
Voltage Rang 220 -240AC
Frequency Rang 50HZ
Power Rang 2.8KW
Your electrical contractor should understand ALL legal
requirements of connecon before undertaking any work
or installaon.
UNDER NO CIRCUMSTANCES UNDERTAKE
THIS YOURSELF!!!
Note for electrician: This product comes with 13 amp plug
(s) ed with an RCD unit. We leave it this way for you to
connect it your own way due to connued addions to
current regulaons.
1) Connect within current laws and IP direcves.
2) (Preferred) Wire into isolated fused feed connecng
directly to the house consumer/service box.
Always use protecon against electrical surge. Your shower
should be treated the same as a home computer. A surge
protector should eradicate the possibility of either the
transformer or control panel being burnt out.
Electrical work needs to be signed o by a fully qualied
operave by law. Failure to adhere to this will not only void
your electrical warranty for your shower, but could void
your house insurance too.
We recommend a BAR pressure between 2.5 and 3.4 BAR. If
you have a combi boiler system no problem should be
experienced. If you have a gravity feed older type installaon
(hot water tank type usually less than 1 BAR) you will almost
certainly need a pump. We cannot advise on which type of
pump is used, locaon or design because all house plumbing
layouts vary. This is a job for your installer/plumber. The end
delivery however must fall within the scope above.
Important Note Do not exceed 3.4 BAR pressure under any
circumstances. Warranty is void if so as damage will occur. If
you have a combi supply, please use a pressure reducing valve
if required to lower the BAR pressure to the shower.
Please Remember that this product is free standing and is
designed to be pulled away from the wall.
The waste hose must be of a exible type (1m exible waste
supplied).
The water supply pipes need to be at least 1 metre in length
and must be that of a exible braided type (not supplied).
DO NOT OVERTIGHTEN THE BRAIDED HOSES AS IT CAN CAUSE
THE CONNECTION TO POP AFTER A FEW WEEKS OF USE.
Always t easy to get to isolaon taps on both hot and cold
water supply (not supplied). Just like a dishwasher or washing
machine, this product MUST be isolated when not in use.
You will require:
• Scissors
• Knife
• Silicone Gun
• Spirit Level
• Tape Measure
• Philips Screwdriver
• Electric Drill
• Safety Gloves
• Safety Glasses
• Silicone
Electrical Requirements Pressure/Water Requirements Tools Required
• RubberGum (supplied)
• Plumbers Mait (not supplied)
• Hot and cold isolaon valves (not supplied)
• 3 x Braided hoses (not supplied)
Parts Required

www.insigniarange.com Last Modied: 07/01/2019
06
What’s in the Boxes?
Box Contents Quanty
Tray Shower Tray, Waste Trap & Hose 1[ ]
Fixed Glass Fixed Glass Panel 1[ ]
Le Side Glass Le Side Panel 1[ ]
Right Side Glass Right Side Panel 1[ ]
Back Panel Back Panel
Cushioned ‘U’ shaped seal
Rubber Washers
1
4
3
[ ]
[ ]
[ ]
Door Pack Door
90 Degree Rigid Seal
Flexible Door to Fixed Glass Seal
1
1
1
[ ]
[ ]
[ ]
Wood Eect
Floor (White)
White Wood Eect Floor 1[ ]
Wood Eect
Stool (White)
White Wood Eect Stool 1[ ]
VERY IMPORTANT
Have you got everything? If not please contact the Insignia Support Line on 01908 226545.
Remember NEVER book your tradesman unl everything has arrived, been checked and is
present. No replacement/missing parts can be obtained free of charge during or aer the
build. Any claims can only be within the mescale permied (48 hours aer delivery) and
always BEFORE build.

www.insigniarange.com Last Modied: 07/01/2019
07
Accessories Hand Shower
Hand Shower Hose
Riser Rail
Insignia Control Panel
Body Jets
Body Jets Connectors (2 open ends)
Body Jets Connectors (1 open end)
PVC hoses
Valve
Glass Shelf
Tri-Jet Outlet
Jubilee Clips
90 Degree Brackets
20mm Screws
Glass Support Brackets
Door Handle
Door Hinge
1
1
1
1
6
4
1
3
1
1
1
20
14
16
8
1
2
[ ]
[ ]
[ ]
[ ]
[ ]
[ ]
[ ]
[ ]
[ ]
[ ]
[ ]
[ ]
[ ]
[ ]
[ ]
[ ]
[ ]
Accessories LED Spotlights
Ozone
Speaker Covers
Speakers
Monsoon Shower Head
Monsoon Perspex Connector
Steam Generator
Steam Generator Thermo Hose
90 Degree Elbows
Body Jets Washers
Body Jets T piece
4
1
2
2
1
1
1
1
2
6
1
[ ]
[ ]
[ ]
[ ]
[ ]
[ ]
[ ]
[ ]
[ ]
[ ]
[ ]

www.insigniarange.com Last Modied: 07/01/2019
08
Twist to adjust
Step 1 — Level the Tray and connecng the waste

www.insigniarange.com Last Modied: 07/01/2019
09
Step 2 — Connecng Tray Brackets
x8
X8 ST20
Cut RubberGum and
apply to the boom
of each bracket.

www.insigniarange.com Last Modied: 07/01/2019
10
Step 3 — Installing the control panel
Unscrew Remove
Insert Control Panel
Connect and Tighten