Insportline IN 10893 inCondi UB30m User manual

1
USER MANUAL – EN
IN 10893 Exercise Bike inSPORTline inCon i UB30m

2
CONTENTS
SAFETY FUNCTION ............................................................................................................................... 3
TOOL KIT ................................................................................................................................................ 4
EXPLODED VIEW ................................................................................................................................... 5
PARTS LIST ............................................................................................................................................ 6
ASSEMBLY ............................................................................................................................................. 7
RESISTNCE ADJUSTMENT ................................................................................................................. 14
CONSOLE INSTRUCTIONS ................................................................................................................. 15
BIKING+ INSTRUCTIONS ................................................................................................................... 17
FAT BURNING ...................................................................................................................................... 22
TERMS AND CONDITIONS OF WARRANTY, WARRANTY CLAIMS ................................................. 23

3
PREFACE
Let’s start a fearless adventure n know ng what to do when no one’s there tell ng you what to do.
BUT Before that please read the follow ng.
SAFETY FUNCTION
This exerciser is made for home use only, and tested up to a max body wei ht of 120k .
1. Follow the steps of the assembly nstruct ons carefully.
2. Use only or g nal parts as del vered.
3. Place th s exerc ser on an even, non-sl ppery surface. Because of poss ble corros on, the
usage of any exerc ser n mo st areas s not recommended.
4. Before assembly, check f del very s complete by us ng the ncluded parts-l st.
5. For assembly use only su table tools and ask for ass stance w th assembly f necessary.
6. Check before the f rst tra n ng and every 1-2 month that all connect ng elements are t ght f tt ng
and are n the correct cond t on.
7. Replace defect ve components mmed ately and/or keep t out of use unt l repa r.
8. For repa rs, use only or g nal spare parts.
9. In case of repa r please ask your dealer for adv ce.
10. Ensure that tra n ng starts only after correct assembly and nspect on.
11. For all adjustable parts be aware of the max mum pos t ons to wh ch they can be adjusted/
t ghtened to.
12. Th s exerc ser s des gned for adults. Please ensure that ch ldren use the exerc ser only under
the superv s on of an adult.
13. Ensure that those present are aware of poss ble hazards, e. g. movable parts dur ng tra n ng.
14. Warn ng: ncorrect/excess ve tra n ng can cause health njur es.
15. Please follow the adv ce for correct tra n ng as deta led n tra n ng nstruct ons.
16. Consult your phys c an before start ng w th any exerc se program. They can adv se on the k nd
of tra n ng and wh ch mpact s su table.
17. Th s user manual s only for customers’ reference.
18. The suppl er cannot guarantee for m stakes occurr ng due to translat on or change n techn cal
spec f cat on of the product.
19. All data d splayed are approx mate gu dance and cannot be used n any med cal appl cat on.
20. For your own safety, always ensure that there s at least 0.6 meter of free space n all
d rect ons around your product wh le you are exerc s ng.
21. WARNING! A hart rate mon tor may not be accurate. Overload ng dur ng tra n ng may cause
ser ous njury or death. If you feel any d scomfort, mmed ately stop the exerc se!
22. Certification: Th s tra n ng equ pment s n compl ance w th EN ISO 20957-1:2013 / EN957-
5:2009, Class HC (for home use)
23. Max user wei ht: 120kg

4
TOOL KIT
These are all the accessor es you w ll need to complete the assembly of your product. The follow ng
accessor es are loosely assembled to the frame or master component and w ll need to be removed
pr or to assembly.

5
EXPLODED VIEW

6
PARTS LIST
Part No.
Description
Q’ty
1 Handlebar 1
2 Handlebar Upr ght 1
3 Ma n Frame 1
4 Saddle Stem 1
5 Front Stab l zer 1
6 Rear Stab l zer 1
7 Pedal Crank and Dr ve Wheel 1
8 Flywheel 1
9 Pulley Bracket 1
10 Console 1
11 Handlebar Gr p Foam 2
12 Pulse Sensor Pad 2
13 M8 x 25 mm Allen Bolt 2
14 Pulse Sensor W re 2
15 Tens on Controller 1
16 Saddle 1
17 Saddle Stem Insert 1
18 Saddle Adjustment Knob 1
19 Transportat on Wheel 2
20 Hex End Cap 2
21 Pedal (R ght & Left) 1
22 Cha n Guard Tr m 2
23 Cha n Cover (R ght & Left) 1
24 Pulley 1
25 Flywheel T ghten ng Nut 2
26 Spr ng 1
27 BB set 1
28 Dr ve Belt 1
29 Handlebar End Cap 2
30 M5x10mm Screw 2
31 Sensor 1
32 Lower Tens on Cable 1
33 Upper L nk W re 1
34 Lower Sensor W re 1
35 Self-tapp ng Screw 11

7
36 M8 Nylon Lock Nut 5
37 M8 Lock Nut 2
38 M8 x 75 mm Carr age Bolt 4
39 M8 x 20 mm Allen Bolt 4
40 M8 Dome Nut 4
41 M8 Curved Washer 10
42 M8 Spr ng Washer 10
43 M8 Flat Washer 5
44 Allen Bolt 1
45 4.2 x 20mm Self-tapp ng Screw 2
46 Bottle Cage 1
ASSEMBLY
Carefully unpack each component, check ng aga nst the parts l st that you have all the necessary parts
to complete the assembly of your product.
PLEASE NOTE that some of the parts may be pre-f tted to major components, so please check
carefully before contact ng our CUSTOMER SUPPORT team.
STEP 1:
Attach the Front and Rear Stab l zer (5 & 6) to the Ma n Frame (3) w th 4 x M8 x 75mm Carr age Bolts
(38), 4 x M8 Curved Washers (41), 4 x M8 Spr ng Washers (42) and 4 x M8 Dome Nuts (40).

8
Note: Do NOT FULLY TIGHTEN any Bolts, Nuts or F tt ngs at th s stage unless spec f cally nstructed
to do so.
STEP 2:
Assemble the Pedals (Left and R ght) (21L & 21R) to the Pedal Crank (7) (see note). Both Pedals
MUST be t ghtened securely otherw se damage may occur to the Crank. F t the Pedal Straps (Marked
L and R) ensur ng a snug, but not t ght f t w th your normal footwear.
Note: One Pedal s suppl ed w th a RIGHT HAND THREAD for the RIGHT HAND SIDE of the cycle
and must be f tted by turn ng CLOCKWISE. The other Pedal s suppl ed w th a LEFT HAND THREAD
for the LEFT HAND SIDE and must be f tted by turn ng ANTI-CLOCKWISE.

9
STEP 3.
Remove the 3 x M8 Nylon Locknuts (36) and 3 x M8 Flat Washers (43) from the unders de of the
Saddle (16).
Attach the Saddle (16) to the Saddle Stem (4) then loosely ref t the 3 x M8 Flat Washers (43) and 3 x
M8 Nylon Locknuts (36).

10
STEP 4:
Sl de the assembled Saddle Stem (4) nto the Ma n Frame (3), select the des red he ght to allow for a
knee bend at the bottom of the pedal ng act on and secure n place w th the Saddle Adjustment Knob
(18).
Al gn the Saddle and t ghten the 3 x M8 Nylon Locknuts (36) securely.
Unlock the Saddle Adjustment Knob (18) and change the saddle he ght f necessary. Select des red
saddle he ght and t ghten Saddle Adjustment Knob (18).
Do not exceed the “MAX” mark ng on tube.

11
STEP 5:
a) Place the end of the 8-stage Tens on Control Cable (15) nto the spr ng hook of the Lower
Tens on Cable (32).
b) Pull the 8-stage Tens on Control Cable upwards aga nst the spr ng pressure and push t nto
the gap on the metal bracket of the Lower Tens on Cable as shown.
c) Complete the f tt ng as shown and f necessary, close the open sect on of the metal bracket
sl ghtly w th a pa r of pl ers as th s w ll help to reta n the cables.
d) Connect the lower part of the Upper L nk W re (33) to the Lower Sensor W re (34) ensur ng a
t ght connect on. Feed the Upper L nk W re (33) out through the top of the Handlebar Upr ght
(2).
e) Carefully lower the Handlebar Upr ght (2) onto the Ma n Frame (3), loosely f t 4 x M8 x 20mm
Allen Bolts (39), 4 x M8 Spr ng Washers (42) and 4 x M8 Curved Washers (41).
f) F t the Bottle Cage (46) w th 2 x Self-tapp ng Screws 4.2 x 20mm (45).

12
STEP 6:
F t the Handlebar (1) onto the Handlebar Upr ght (2) w th 2 x M8 x 25mm Allen Bolts (13), 2 x M8
Curved Washers (41), 2 x M8 Spr ng Washers (42).

13
STEP 7:
Attach the Console (10) to the Handlebar Upr ght (2) us ng 2 x M5 x 10mm Screws (30).
Connect the Upper L nk W re (33) and Pulse Sensor W re (14) nto the back of Console (10).

14
RESISTNCE ADJUSTMENT
To adjust the pedal ng res stance dur ng use, start by turn ng the Tens on Controller Knob (15) fully
COUNTER-CLOCKWISE at the start of your workout. Gradually ncrease the pedal ng res stance by
turn ng the Tens on Controller Knob CLOCKWISE as requ red.
When you have f n shed your rout ne, turn the Tens on Controller Knob (15) fully COUNTER-
CLOCKWISE aga n to ensure that the Tens on Controller Cable s not under tens on when your
Magnet c B ke s not n use.
Note: There may be a small amount of bu lt n res stance present at f rst due to the general t ght f t of
the new bear ngs, bushes and the dr ve belt.
The foot pr nt for th s product s 835mm x 475mm.
The assembled we ght s 20.34 kg

15
CONSOLE INSTRUCTIONS
DISPLAY FUNCTION
SCAN
The sequence of d splay: TMR→SPD→ DST→CAL→ODO→PULSE
• In SCAN mode, press MODE key to choose other funct ons.
• Automat cally scan through each mode n sequence every 6 seconds.
SPEED (SPD)
• W/O any s gnal been transm tted nto the mon tor for 4 seconds, SPEED w ll d splay “0.0”
• D splay current tra n ng speed.
TIME (TMR)
• W/O sett ng the target value, t me w ll count up.
• W th sett ng the target value, t me w ll count down from your target t me to 0, and as 0 s
ach eved t me alarm.
• W/O any s gnal been transm tted nto the mon tor for 4 seconds, t me w ll STOP
• Range 0:00 ~ 99:59
DISTANCE (DST)
• W/O sett ng the target value, d stance w ll count up.
• W th sett ng the target value, d stance w ll count down from your target d stance to 0, and as 0
s ach eved d stance alarm.
• Range 0.0~999.9 KM
CALORIES (CAL)
• W/O sett ng the target value, calor e w ll count up.

16
• W th sett ng the target value, calor es w ll count down from your target calor e to 0, and as 0 s
ach eved calor e alarm.
• Range 0.0~9999 Cals
• Calor e count on the d splay only serves as a general gu del ne. For deta l calor e consumpt on
for each nd v dual please consult a phys c an or a nutr t on st.
ODO
• Accumulates total workout d stance. Th s data can be reset to zero when batter es are
replaced.
PULSE
W th pulse s gnal nto for 6 seconds, the current pulse w ll d splay.
• W/O pulse s gnal nto for 6 seconds, t d splays “P”
• Pulse alarm when over preset target pulse.
• Range 0-40~230 BPM
BUTTON FUNCTION
RESET
• In sett ng cond t on, press RESET key once to reset the current funct on f gures.
• Press RESET key and hold for 2 seconds to reset all funct on f gures, and have B sound for
prompt at the same t me.
SET
• Each add ng by press ng once, press and hold the button to ncrease the value faster
• TMR sett ng range: 0:00~99:00 (Each ncrement s 1:00)
• CAL sett ng range: 0~9990 (Each ncrement s 10)
• DST sett ng range: 0.0~999.0 (Each ncrement s 1.0) KM
MODE
• Choose each funct on by press ng MODE key. In SCAN mode, press MODE key can lock the
current funct on.
• Press MODE key and hold for 2 seconds to reset all funct on f gures.
POWER ON/OFF
Power on: LCD w ll d splay all segments w th B sound as Draw ng A.
Power off: W thout any s gnal been transm tted nto the mon tor for 4 m nutes, and the mon tor enter
to SLEEP.
OPERATION
1. When mon tor power on (or press MODE, RESET key and hold for 3 seconds), LCD w ll
d splay all segments w th B sound for one second and enter to SCAN mode as Draw ng B.
2. W th any s gnal been transm tted nto the mon tor, the value of TMR, DST, and CAL w ll start
to count up as Draw ng C.
3. W thout any s gnal been transm tted nto the mon tor for 4 m nutes, the mon tor w ll enter to
SLEEP mode.
TROUBLE SHOOTING
• When the d splay shows Draw ng D, t means the batter es need to be changed.

17
• If there s no s gnal when you pedal, please check f the cable s well connected.
Drawin A
Drawin B
Drawin C
Drawin D
Note:
1. Compat ble w th OS and Andro d system.
2. Console and mob le dev ce connect on v a Tunel nc, once connect ng,
the d splay w ll be off.
3. Stop tra n ng for 4 m nutes, the ma n screen w ll be off.
4. If the computer d splays abnormally, please re- nstall the battery and try
aga n.
5. Battery Spec: 1.5V UM-3 or AA (4PCS).
iBIKING+ INSTRUCTIONS
To operate B k ng+, f rst you need to connect your 3c dev ce and computer through 3.5mm cable.
Then download B k ng+ from Google play or App store.
Note
:
Download B k ng+ n Google play, system requ rements: 480*800, 720*1280,
1280*800 Andro d 2.2 or above.
Support Andro d dev ces: Samsung Galaxy Note 1~4, Samsung Galaxy S2~5,
HTC NEW ONE, HTC D316d, HTC M8, SONY Z ULTRA.
Download B k ng+ n APP STORE, system requ rements: OS 5.1.1 or above.
Support OS dev ces: Phone4s, Phone5, Phone5s, Phone6, Phone6+.

18
STARTING iBIKING+
Step
1
Step
2
Step
3
• Enter ng the App
• Press “Tunel nc” con
• Connect on not success
yet:
• Press “Tunel nc” con
aga n to conf rm
• Successful connect on:
MAIN FUNCTION OF iBIKING+
The ma n funct ons of B k ng+ are: 1. tra n ng 2. gym center 3. sett ng 4. nformat on
TRAINING
The ma n funct on of tra n ng are: 1. target 2. qu ck start 3. heart rate
1. You can sett ng 3 traget values, wh ch are: 1. t me 2. d stance 3. calor es
*1 „x“ to clear
*2 „Done“ to conf rm
• After sett ng the target Values, t w ll start countdown dur ng your workout.
2. Qu ck start can present the values of t me, d stance, calor es, speed, rpm, heart
rate dur ng exerc se.

19
Main layout
Workout summary
S
hare layout
• After start ng exerc se user can press pause from console control to stop any t me.
• When f n sh, the workout summary can post on Facebook, Tw tter, We bo.
3. You can sett ng 2 values: 1. heart rate 2.t me
Main layout:
*1 „x“ to clear
*2 „Done“ to conf rm
As over the target heart rate
value, there would be a warn ng
GYM CENTER
Comb ne w th google map, sett ng and show the route when exerc se.
1. Plan my own route
User can set a start
po nt and end po nt by
own wh ch
* User selected route
can save n my
favor tes

20
2. My favor te
There are f ve default routes n my favor tes. User selected route can save n my favor tes.
Main layout:
Choose vision mode
Shows elevat on and length of
the route
shows the exerc se nformat on:
t me, d stance, calor es, speed,
rpm, heart rate
3. MapMyF tness
Combine with map my fitness.
Step 1
Enter ng my prof le, press „MapMyFITNESS“
Step 2
press “AUTHORIZE” to comb ne b k ng+ and
MapMyF tness