Insportline IN3948 User manual

IN3948 POWER TOWERR
CAUTION:
WARNING: Do not use this
product without a physician’s
approval.
Do not let children use this
product unsupervised.
Read all instructions carefully
before using.
Tighten all bolts before using
equipment.
Leave adequate space to
exercise
CAUTION:
Maximum Weight Limit is 300
lbs.
Photo may differ from actual product.

POWER TOWER
Owner’s Manual
BEFORE BEGINNING ASSEMBLY
CAUTION:
Maximum Weight Limit is 300 lbs.
Take a few moments to familiarize yourself with the specific parts and hardware included with your
product. Make sure all the parts and hardware are included in the carton and examine them for any
damage that may have occurred in transport. Some parts may be pre-assembled and pre-installed.
CAUTION
WARNING:
Before starting any exercise program, consult your physician.
Read all instructions very carefully before using equipment
Tighten all bolts securely before using equipment
Product Warranty
Limited Liability
We warrants that this product will be free from defects in materials and workmanship for a period of ninety
( 90 ) days from date of purchase. This warranty applies only to the original purchaser when purchase of the
product is from an authorized retailer and is for personal or household use, but not when the sale is for
commercial use. This warranty is not transferable.
EXCEPT FOR THE LIMITED EXPRESS WARRANTY STATED HEREIN, WE DISCLAIMS ALL OTHER
EXPRESS OR IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.SOME STATES DO NOT ALLOW
LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATIONS MAY
NOT APPLY TO YOU.
We will not be liable for any loss or damage, including incidental or consequential damages of any kind,
whether based upon warranty, contract or negligence and arising in connection with the sale, use or repair of
the product.
SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR
CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU.
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS AND YOU MAY HAVE OTHER RIGHTS THAT
VARY FROM STATE TO STATE.
In the event of failure of this product to conform to this warranty during the warranty period, please call our
service number for assistance in the repair or replacement of the product or any covered part. We will repair
or replace, at its own option, the product or any covered part, except that this warranty does not cover
damage caused by accident ( including transit) , or repairs or attempted repairs by any person not authorized
by our company, or by vandalism, misuse, abuse, or alteration. The Warranty Period is based on the
purchase date of the product validated by the Authorized Retailers Register Receipt, or valid copy of
transaction statement.

Parts Listing

Exploded View

Baseframe Assembly- Step 1
S
Connect Left Lower Baseframe (1) to Right Lower Baseframe (2) using Lower
Cross Bar Support (3) and secure with 4 Bolts (16) , 2 Metal Support Plates( 4),
4 Washers (17) and 4 Nuts (18). Place End Caps (15) on ends of Baseframe
1 & 2.
E
NOTE: Tighten All Bolts At This Time

Mainframe Assembly –Step 2
inframe Assembly -Step Mainframe Assembly ( cont)
–Step 3
Connect Lower Section (5) of
Mainframe Support to Lower
Cross Bar Support (3) using 2
Bolts (19), 2 Washers (17) and 2
Nuts (18)

NOTE: Tighten All Bolts At This Time
Mainframe Assembly ( cont) –Step 3
Connect Rear Support Frame (6) to Lower
Baseframe sections (1&2), using 2 Bolts
(19),
2 Washers (17) and 2 Nuts (18)
Connect Upper Section (7) of Mainframe
Support
to Lower Mainframe Support (5) using 4
Threaded
Screws (20), and 2 Washers (17)

NOTE: Tighten All Bolts At This Time
Upper Pull Up Frame Assembly- Step 4
Connect Handlebars (10 &11) to Upper Pull Up Frame
Assembly (9) using Bolts (16) and Washers (21).
Connect Handlebars to Upper Frame Assembly using
Screws (23) and washers (22). Place Round Caps (24) over
End of Handle Assembly.

NOTE: Tighten All Bolts At This Time
Upper Frame Assembly (Cont.)- Step 5
Connect completed Upper Handle
Assembly to Mainframe Assembly
using 4
Screws (20) and 4 Washers (17)

NOTE: Tighten All Bolts At This Time
Vertical Knee Raise / Dip Assembly - Step 6
Connect Vertical Knee
Raise/Dip
Assembly (8) to completed
Mainframe Assembly (5/7)
using
Bolt ( 25), 1 Washer (17) and
1
Nut (18)

NOTE: Tighten All Bolts At This Time
Arm Pad Assembly- Step 7
Connect Arm Rest Pads
(12)
to Vertical Knee
Raise/Dip
Assembly (8) using 4
Screws
(26) and 4 Washers
(22)

NOTE: Tighten All Bolts At This Time
Upper Frame Assembly (Cont.)- Step 8
Install Backrest Pad (13)
to
Upper Mainframe (7)
using 2
Screws (26) and 2
Washers
(27).
Note: Self Tapping Screw
(14) is used to secure
Vertical
Knee Raise (8) in Upper
Position to Accommodate
Pull
Ups

NOTE: Tighten All Bolts At This Time
Vertical Knee Raise/Dip Assembly Adjustment
Step 9
Vertical Knee Raise/Dip
Assembly (8) can be
adjusted
Up or Down using Pin
(14)

NOTE: Tighten All Bolts At This Time
Final Assembly
300 Lb.Weight
Capacity
CAUTION:
MAKE SURE ALL NUTS, OLTS
& SCREWS ARECOMPLETELY
TIGHTENED BEFORE USE