fantastic furniture Brody User manual

fantasticfurniture.com.au
Version 1.0
Clothes Rack 4 Shelf
Brody

Secure it!
Reduce the risk of furniture
tip-over accidents
Page
fantasticfurniture.com.aufantasticfurniture.com.au
20
WEIGHT LIMIT: KGS PER SHELF
Please seek professional advice if you are in doubt of what fixing device to use.
2
Wall attachment guide
For plasterboard
(with available wood stud)
Securing method:
Screw inserted directly into
stud.
For plasterboard
(without available wood stud)
Securing method:
Self drilling plasterboard
anchor.
For masonry wall
Securing method:
Solid wall: Plug with screw
Hollow wall: Spring toggle
WARNING: ENSURE THE WALL STRAP IS ATTACHED TO
AVOID SERIOUS INJURY OR DEATH.
To avoid any serious or fatal injury, a wall strap has been provided with this
product to prevent toppling. We strongly recommend that this product is
permanently fixed to the wall or other suitable surface. Fixing devices are not
included since different surface materials require different attachments.
Please seek professional advice if you are in doubt of what fixing device to use.
To reduce the risk of furniture tipover:
•Do not allow children to stand, climb or hang on furniture. It may topple
and cause serious injury or death.
•Do not place toys or other child appealing items on top of this furniture,
and place heaviest items towards the bottom of the furniture.
• Do not open more than one drawer at the time.
•Anchoring this product to a wall or other suitable surface is recommended.
Check anchors regularly.
•Avoid putting a TV on this product.

fantasticfurniture.com.au
Page 3
Looks like you’ve found
your Fantastic!
Love it? Share it!
Fantastic buy! Share how it looks at home on Instagram for
your chance to win a $250 Fantastic Furniture Gift Card!
@fantasticfurniture
We’re thrilled you’ve chosen Fantastic Furniture
to help create a home you’ll love!

fantasticfurniture.com.au
Read through the instructions
carefully before you begin.
Identify and lay out all of the
components before you begin assembly.
Unless instructed, do not fully tighten
screwsuntil the item is fully assembled.
Make sure you have all the required tools.
Never use power tools unless instructed.
! Never use power tools unless specifically instructed. They can damage your
components or hardware if used incorrectly.
! The most common mistakes made during assembly are using the wrong hardware or
getting components back to front.
! Always use a so t surface (such as carpet or cardboard) when assembling your
product to avoid scratching or damaging the surface of the product.
! Bulky items such as wardrobes and bunk beds should be assembled in the room they
will be used in as they may not fit through a door once assembled.
! Never use any glue until you are certain that the parts belong together.
! Periodically check and re-tighten all fasteners. Check the product care label or
website for product care instructions.
components please visit our website Help Centre for further assistance.
Assembly Checklist
!Please see page 2for any safety requirements or weight restrictions.
Useful information
Page 4

Page 5
fantasticfurniture.com.au
What You Need
to assemble the product
Hardware list:
Box 1:
Shelf Panel (P1)
18X Screws (H1)
(P6)
(P9)
(P8)
(P11)
(P10)
(P7)
Shelf Panel
(P1)
(P2)
(P3)
(P4)
(P5)
(P15)
Top Left Frame
Lower Left Frame
Lower Middle Frame
Top Middle Frame Top Right Frame
Lower Right Frame
(P12)
(P12)
(P13)
(P13)
(P14)
20X Screws (H2) 6X Screws (H3) 1X Allen Key (H4)
Shelf Panel (P2)
Shelf Panel (P3)
Shelf Panel (P4)
Shelf Panel (P5)
Top Left Frame (P6)
Top Middle Frame (P7)
Top Right Frame (P8)
Lower Left Frame (P9)
Lower Middle Frame (P10)
Lower Right Frame (P11)
6 x Small Bars (P12)
2 x Threaded Bars (P13)
Hanging Rail (P14)
(P12)
2 x Large Bars (P15)
Hanging Rail
Large Bar
Threaded Bar
(P12)
(P12)
(P12)
Shelf Panel
Shelf Panel
Shelf Panel
Shelf Panel
1 x Wall Strap 1 x Wall Strap
Screw (H6)
2 x Washers (H7)
(H5)

(P8)
Page 6
fantasticfurniture.com.au
Step 1
Step 2
You will need
(H3) (H4)
4X Screws Allen Key
(P11)
You will need
(H3) (H4)
2X Screws Allen Key
(P6)
(P9)
(H3)
(H3)
(H3)
(H3)
(H3)
(H3)
(H3)
(H3)
(H3)
(P11)
(P8)
(H4)
(P7)
(P10)
Repeat steps for the Top Right Frame (P8) and Lower Right Frame (P11).
Attach Top Let Frame (P6) to Lower Let Frame (P9) with
2 x Screws (H3) by tightening with the Allen Key (H4);
Attach Top Middle Frame (P7) to Lower Middle Frame (P10) with 2 x Screws (H3) by
tightening with the Allen Key (H4).

Page 7
Step 4
You will need
fantasticfurniture.com.au
(P4)
(H2)
(H2)
(H2)
(P13)
(H2) (H4)
4X Screws Allen Key
Attach Small Bars (P12×2) to Shelf Panel (P1) with 4 x Screws (H2) by tightening with the
Allen Key (H4).
Attach Threaded Bars (P13×2) to Shelf Panel (P4) with 2 x Screws (H2) by tightening
with the Allen Key (H4) as shown.
Repeats steps for Shelf Panels (P2) & (P3).
You will need
Step 3
(H2) (H4)
12X Screws Allen Key
(P1)
(P2)
(P3)
(H2)
(H2)
(H2)
(H2)
(H2)
(H2)
(H2)
(H2)
(H2)
(H2)
(H2)
(P12)
(P12)
(P12)
(P12)
(P12)
(P13)
(H4)
(H2)
(H4)
(H2)
(P12)
Counter sink
face screw
Counter sink
face screw

Page 8
fantasticfurniture.com.au
You will need
Step 6
You will need
(H1) (H4)
14X Screws Allen Key
(H1)
(H1)
(H1)
(P13)
(H1)
(H1)
(H1)
(P12)
(P13)
(P1)
(P2)
(P3)
(P4)
(H1)
(H1)
(H1)
(H1)
(P6)
(P7)
(P9)
(P10)
(P13)
(P15)
(P15)
(H1)
(H1)
(H1)
(H1)
(H4)
(P15)
(H2) (H4)
4X Screws Allen Key
(P5)
(P15)
(P15)
(H2)
(H2)
(H2)
Step 5
Attach Shelves (P1, P2, P3 & P4) to Top & Lower Let Frames (P6&P9) and Top & Lower
Middle Frames (P7&P10) as shown with 14 x Screws (H1) by tightening with the Allen Key(H4).
Attach Large Bars (P15×2) to Lower Middle Frame (P10) by tightening to the ends of
Threaded Bars (P13×2).
Attach Shelf Panel (P5) to Large Bars (P15×2) with 4 x Screws (H2) by tightening with
the Allen Key (H4).
Ensure the
threaded rods are
inserted through
the lower middle
frame.
(P10)
(H2)
(P15)
(P5)
Counter sink
face screw

Page 9
Step 7
fantasticfurniture.com.au
You will need
(H1) (H4)
4X Screws Allen Key
(H1)
(P11)
(P8)
(H1)
(H1)
(P5)
(H1)
(P14) (P11)
(P15)
(P15)
(P15)
Attach Hanging Rail (P14) to Top Middle & Top Right Frames (P7&P8) with 2 x Screws (H1)
by tightening with Allen Key (H4).
Secure Large Bars (P15×2) to Lower Right Frame (P11) with 2 x Screws (H1) by tightening
with the Allen Key (H4).
(P7)
(P10)
You will need
Phillips head
screwdriver
1 x Wall Strap 1 x Wall Strap
Screw
1 x Washer
(H5) (H6)
Step 8
(H7)
(H5)
(H6)
(H7)
(P3)
Attach the Wall Strap (H5) to the Panel (P33) with 1 x Washer (H7) and 1 x Wall
Strap Screw (H7) by tightening with the Phillips Head Screwdriver.

Page 10
fantasticfurniture.com.au
You will need
Job Complete!
In the interest of our environment
packaging thoughtfully.
please dispose of all
Screws and wall plugs are not
provided please use appropriate
fixtures for your wall.
1 x Washer
(H7)
(H5)
(H7)
Step 9
Move the unit into it’s final position and then
Ensure it is firmly attached. Screw and wall plug are not
*Seek advice from a qualified tradesperson on how to
attach this safety strap to your specific wall.
secure the Safety Strap to the wall.
provided. Please use appropriate fixtures for your wall.