Intel CD1M3128MK Configuration guide

1
Intel® Compute Card
CD1M3128MK
CD1IV128MK
Technical Product Specification
July 2018
Order Number: J46734-002
Intel® Compute Card CD1M3128MK or CD1IV128MK may contain design defects or errors known as errata that may cause the product to deviate
from published specifications. Current characterized errata, if any, are documented in Intel® Compute Card CD1M3128MK or CDIV128MK
Specification Updates
+

2
Revision History
Revision
Revision History
Date
001
First release
August 2017
002
Added table detailing measurements and tolerances
July 2018
Disclaimer
This product specification applies to only the standard Intel®Compute Card with BIOS identifier
MKKBLY35.86A or MKKBI5V.86A.
INFORMATION IN THIS DOCUMENT IS PROVIDED IN CONNECTION WITH INTEL®PRODUCTS. NO LICENSE, EXPRESS OR
IMPLIED, BY ESTOPPEL OR OTHERWISE, TO ANY INTELLECTUAL PROPERTY RIGHTS IS GRANTED BY THIS DOCUMENT.
EXCEPT AS PROVIDED IN INTEL’S TERMS AND CONDITIONS OF SALE FOR SUCH PRODUCTS, INTEL ASSUMES NO
LIABILITY WHATSOEVER, AND INTEL DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY, RELATING TO SALE AND/OR
USE OF INTEL PRODUCTS INCLUDING LIABILITY OR WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE,
MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.
UNLESS OTHERWISE AGREED IN WRITING BY INTEL, THE INTEL PRODUCTS ARE NOT DESIGNED NOR INTENDED FOR
ANY APPLICATION IN WHICH THE FAILURE OF THE INTEL PRODUCT COULD CREATE A SITUATION WHERE PERSONAL
INJURY OR DEATH MAY OCCUR.
All Compute Cards are evaluated as Information Technology Equipment (I.T.E.) for installation in homes, offices, schools,
computer rooms, and similar locations. The suitability of this product for other PC or embedded non-PC applications or
other environments, such as medical, industrial, alarm systems, test equipment, etc. may not be supported without further
evaluation by Intel.
Intel Corporation may have patents or pending patent applications, trademarks, copyrights, or other intellectual property
rights that relate to the presented subject matter. The furnishing of documents and other materials and information does
not provide any license, express or implied, by estoppel or otherwise, to any such patents, trademarks, copyrights, or
other intellectual property rights.
Intel may make changes to specifications and product descriptions at any time, without notice.
Designers must not rely on the absence or characteristics of any features or instructions marked “reserved” or
“undefined.” Intel reserves these for future definition and shall have no responsibility whatsoever for conflicts or
incompatibilities arising from future changes to them.
Intel processor numbers are not a measure of performance. Processor numbers differentiate features within each
processor family, not across different processor families: Go to:
Learn About Intel®Processor Numbers
Contact your local Intel sales office or your distributor to obtain the latest specifications before placing your product
order.
Intel, the Intel logo and Intel Core are trademarks of Intel Corporation in the U.S. and/or other countries.
* Other names and brands may be claimed as the property of others.
Copyright 2018 Intel Corporation. All rights reserved.

3
Specification Changes or Clarifications
The table below indicates the Specification Changes or Specification Clarifications that apply to
the Intel® Compute Card CD1M3128MK and CD1IV128MK.
Specification Changes or Clarifications
Date
Type of Change
Description of Changes or Clarifications

Errata
Current characterized errata, if any, are documented in a separate Specification Update. See
http://www.intel.com/ComputeCardSupport for the latest documentation.

4
Preface
This Technical Product Specification (TPS) specifies the layout, components, connectors, power,
environmental and BIOS features for the Intel® Compute Card CD1M3128MK and CD1IV128MK.
NOTE
In this document, the use of “Intel® Compute Card” will refer to the CD1M3128MK and
CD1IV128MK versions of the Intel® Compute Card.
Intended Audience
The TPS is intended to provide detailed technical information about Intel® Compute Card
CD1M3128MK and CD1IV128MK and its components to the vendors, system integrators, and
other engineers and technicians who need this level of information. It is specifically not intended
for general audiences.
What This Document Contains
Chapter
Description
1
A description of the hardware used on Intel® Compute Card CD1M3128MK and CD1IV128MK
2
A technical description of the Intel® Compute Card CD1M3128MK and CD1IV128MK
3
The features supported by the BIOS Setup program
Typographical Conventions
This section contains information about the conventions used in this specification. Not all of
these symbols and abbreviations appear in all specifications of this type.
Notes, Cautions, and Warnings
NOTE
Notes call attention to important information.
CAUTION
Cautions are included to help you avoid damaging hardware or losing data.

5
Other Common Notation
#
Used after a signal name to identify an active-low signal (such as USBP0#)
GB
Gigabyte (1,073,741,824 bytes)
GB/s
Gigabytes per second
Gb/s
Gigabits per second
KB
Kilobyte (1024 bytes)
Kb
Kilobit (1024 bits)
kb/s
1000 bits per second
MB
Megabyte (1,048,576 bytes)
MB/s
Megabytes per second
Mb
Megabit (1,048,576 bits)
Mb/s
Megabits per second
TDP
Thermal Design Power
Xxh
An address or data value ending with a lowercase h indicates a hexadecimal value.
x.x V
Volts. Voltages are DC unless otherwise specified.
*
This symbol is used to indicate third-party brands and names that are the property of their respective
owners.

6
Contents
Revision History...............................................................................................................2
Specification Changes or Clarifications.........................................................................................................3
Errata............................................................................................................................................................................3
Preface ...............................................................................................................................4
Intended Audience.................................................................................................................................................4
What This Document Contains.........................................................................................................................4
Typographical Conventions ...............................................................................................................................4
Contents ............................................................................................................................6
1Product Description ..................................................................................................9
1.1 Overview .........................................................................................................................................................9
1.2 Version Summary........................................................................................................................................9
1.3 Online Support.............................................................................................................................................9
1.4 Feature Summary.....................................................................................................................................10
1.4.1 Compute Card Exterior........................................................................................................11
1.4.2 Block Diagram.........................................................................................................................12
1.5 Operating System Overview................................................................................................................ 13
1.6 Processor.....................................................................................................................................................13
1.7 System Memory........................................................................................................................................13
1.8 System Storage......................................................................................................................................... 13
1.9 Processor Graphics Subsystem..........................................................................................................14
1.9.1 Integrated Graphics ..............................................................................................................14
1.10 Wireless LAN Subsystem ......................................................................................................................15
1.10.1 Wireless Network Module.................................................................................................. 15
1.11 Authentication...........................................................................................................................................15
1.12 Power Management ................................................................................................................................16
1.12.1 ACPI.............................................................................................................................................16
1.12.2 Hardware Support.................................................................................................................18
1.13 Intel® Security and Manageability Technologies.........................................................................20
1.13.1 Intel® vPro™ Technology.....................................................................................................20
1.13.2 Intel® Virtualization Technology...................................................................................... 21
1.13.3 Intel® Trusted Execution Technology............................................................................ 21
1.13.4 Intel® Identity Protection Technology........................................................................... 22
1.13.5 Intel® Platform Trust Technology (PTT)....................................................................... 22
1.13.6 Intel® Software Guard Extensions (SGX) ......................................................................22
1.13.7 Intel® Memory Protection Extensions (MPX)..............................................................22
1.13.8 Trusted Platform Module (discrete TPM) .................................................................... 22

7
2Technical Reference............................................................................................... 23
2.1 Addressable Memory..............................................................................................................................23
2.2 Connector....................................................................................................................................................23
2.2.1 Connector Interface Options ............................................................................................24
2.2.2 Power On Straps and Select Signals ............................................................................. 24
2.2.3 Muxing Options ...................................................................................................................... 25
2.2.4 Connector Pinout...................................................................................................................25
2.3 Power Considerations ............................................................................................................................27
2.4 Mechanical Considerations.................................................................................................................. 27
2.4.1 Form Factor.............................................................................................................................. 27
2.5 Thermal Considerations........................................................................................................................ 30
2.6 Reliability .....................................................................................................................................................30
2.7 Environmental ...........................................................................................................................................31
3Overview of BIOS Features................................................................................... 32
3.1 Introduction................................................................................................................................................ 32
3.2 BIOS Flash Memory Organization .....................................................................................................32
3.3 System Management BIOS (SMBIOS)..............................................................................................32
3.4 Legacy USB Support ...............................................................................................................................33
3.5 BIOS Updates.............................................................................................................................................33
3.5.1 Language Support.................................................................................................................33
3.6 BIOS Recovery ...........................................................................................................................................34
3.7 Boot Options..............................................................................................................................................34
3.7.1 Booting Without Attached Devices................................................................................34
3.7.2 BIOS POST Hotkeys..............................................................................................................35
3.7.3 Changing the Default Boot Device During POST......................................................35
3.7.4 Power Button Menu..............................................................................................................35
3.7.5 BIOS Error Messages............................................................................................................36
Figures
Figure 1. Top-Front View of Compute Card.................................................................................................... 11
Figure 2. Bottom-Back View of Compute Card.............................................................................................. 11
Figure 3. Block Diagram...........................................................................................................................................12
Figure 4. Compute Card Connector Pinout.....................................................................................................25
Figure 5. Compute Card Dimensions (Top and Left)...................................................................................27
Figure 6. Compute Card Dimensions (Bottom and Right).........................................................................28
Figure 7. Compute Card Dimensions (Front and Back) ..............................................................................29
Figure 8. Compute Card Dimensions (Connector)........................................................................................29
Tables
Table 1. Version Summary........................................................................................................................................9
Table 2. Feature Summary.....................................................................................................................................10

8
Table 3. Effects of Pressing the Power Switch............................................................................................... 16
Table 4. Power States and Targeted System Power ...................................................................................17
Table 5. Wake-up Devices and Events..............................................................................................................18
Table 6. Connector Interface Options...............................................................................................................24
Table 7. Power On Straps and Select Signals ................................................................................................24
Table 8. Compute Card Connector Pinout ......................................................................................................26
Table 9. Measurement with Maximum Tolerances...................................................................................... 28
Table 10. Compute Card Weight Information................................................................................................ 29
Table 11. Power Usage............................................................................................................................................ 30
Table 12. Skin Temperature Recommendations..........................................................................................30
Table 13. Environmental Specifications...........................................................................................................31
Table 14. Acceptable Drives/Media Types for BIOS Recovery ...............................................................34
Table 15. Boot Device Menu Options................................................................................................................35
Table 16. BIOS Error Messages............................................................................................................................36

9
1Product Description
1.1 Overview
The Intel® Compute Card requires a certified compatible device with a Compute Card slot in order
to operate. For information on compatible devices for use with the Intel® Compute Card see
www.intel.com/ComputeCard/.
1.2 Version Summary
There are two different versions of this model of Intel® Compute Card available which are
summarized in Table 1. Unless otherwise noted in this document, not all features are available on
all versions of the Intel® Compute Cards.
Table 1. Version Summary
Version
Intel® vPro™
Discrete TPM
Memory
Processor
CD1M3128MK
No
No
4 GB
Intel® Core™ m3-7Y30 Processor
CD1IV128MK
Yes
Yes
8 GB
Intel® Core™ i5-7Y57 Processor
1.3 Online Support
To find information about…
Visit this World Wide Web site:
Intel® Compute Card
http://www.intel.com/ComputeCard
Intel® Compute Card CD1M3128MK and
CD1IV128MK Support
http://www.intel.com/ComputeCardSupport
Available configurations for Intel® Compute Card
http://ark.intel.com

10
1.4 Feature Summary
Table 2 summarizes the major features of the Intel® Compute Card.
Table 2. Feature Summary
Form Factor
94.5 millimeters by 55 millimeters by 5 millimeters (3.7205 inches by 2.1654 inches by
0.1969 inches)
Processor
Soldered-down Intel® Core™processor
―Integrated graphics
―Integrated memory controller
―Integrated PCH
Memory
Soldered-down dual-channel LPDDR3 1866 MHz memory
4 GB total memory for CD1M3128MK
8 GB total memory for CD1IV128MK
Graphics
Integrated graphics support with Intel®HD Graphics Technology
Audio
Intel® High Definition (Intel®HD) Audio
Storage
128 GB soldered-down PCIe x2 SSD onboard storage
BIOS
Intel®BIOS resident in the Serial Peripheral Interface (SPI) Flash device
Support for Advanced Configuration and Power Interface (ACPI), Plug and Play, and
System Management BIOS (SMBIOS)
Wireless LAN
Soldered-down Intel® Dual Band Wireless-AC module
802.11a/b/g/n, 802.11ac, Bluetooth* 4.2
Supports Miracast* and Miracast Plus
Advanced
Technologies
Intel® vPro™ Technology (CD1IV128MK only)
Intel® Virtualization Technology (VT-x)
Intel® Virtualization for Directed I/O (VT-d)
Intel® VT-x with Extended Page Tables (EPT)
Intel® Speed Shift Technology
Intel® Turbo Boost Technology
Intel® Hyper-Threading Technology
Enhanced Intel® SpeedStep® Technology
Intel® Identity Protection Technology (Intel® IPT)
Intel® Platform Trust Technology (Intel® PPT) –(CD1M3128MK only)
Security and Reliability
Intel® Active Management Technology 11.0 (Intel® AMT) –(CD1IV128MK only)
Intel® Trusted Execution Technology (Intel® TXT) –(CD1IV128MK only)
Intel® Memory Protection Extensions (Intel® MPX)
Intel® Software Guard Extensions (Intel® SGX)
Intel® AES New Instructions
Execute Disable Bit
Discreet Trusted Platform Module 2.0 (TPM) –(CD1IV128MK only)
To find information about…
Visit this World Wide Web site:
Advanced Technologies
http://www.intel.com/Support
Security and Reliability

11
1.4.1 Compute Card Exterior
Figures 1 and 2 show the exterior of the Intel® Compute Card.
Figure 1. Top-Front View of Compute Card
Figure 2. Bottom-Back View of Compute Card

12
1.4.2 Block Diagram
Figure 3 is a block diagram of the major functional areas of the Intel® Compute Card.
Figure 3. Block Diagram

13
1.5 Operating System Overview
The Intel® Compute Card CD1M3128MK and CD1IV128MK support the following Operating
Systems (64-bit only).
Windows* 10 Home
Windows 10 Pro
Windows 10 Enterprise
Windows 10 Education
Windows 10 IoT Enterprise
Some Linux* operating systems may be supported. Check with the specific Linux distribution
to make sure that support is available for this platform.
Installation of any of the above operating systems will require a compatible device with a
Compute Card slot, the Compute Card plugged in, a mouse and keyboard along with a USB flash
drive or USB optical drive. The USB flash drive or USB optical drive will need the operating
system installation media.
To find information about…
Visit this World Wide Web site:
Intel® Compute Card drivers
http://downloadcenter.intel.com
1.6 Processor
The Intel® Compute Card has a soldered-down System-on-a-Chip (SoC), which consists of an
Intel® Core™ m3-7Y30 Processor on the CD1M3128MK and an Intel® Core™i5-7Y57 Processor on
the CD1IV128MK.
Integrated Intel® HD Graphics 615
Integrated memory controller
Integrated PCH
1.7 System Memory
The Intel® Compute Card has soldered-down memory and supports the following memory
features:
LPDDR3 1866 MHz
Dual-channel memory
2 GB memory per channel (4 GB total memory) on CD1MK128MK
4 GB memory per channel (8 GB total memory) on CD1IV128MK
Refer to Section 2.1 on page 23 for information on the total amount of addressable memory
1.8 System Storage
The Intel® Compute Card has soldered-down storage using a 128 GB PCIe x2 Sold State Drive.

14
1.9 Processor Graphics Subsystem
The Intel® Compute Card supports graphics through Intel® HD Graphics.
1.9.1 Integrated Graphics
The Intel® Compute Card supports integrated graphics via the processor. Two Digital Display
Interface (DDI) lanes are available from the Compute Card connector. How the DDI lanes are used
is dependent on the device the Compute Card is plugged into and how the lanes are configured.
By default, the DDI lanes are configured as DisplayPort* 1.2. The DDI lane from the extended part
of the connector can be configured as HDMI* 1.4b via DDI_Config.
High-Bandwidth Digital Content Protection support for content protection
oHDCP 2.2 supported via DisplayPort
oHDCP 1.4 supported via HDMI
Resolutions and refresh rates supported
oUp to 4K @ 60Hz via DisplayPort
oUp to 4K @ 30Hz via HDMI
See section 2.2 for more information on the connector and connector configuration options.
1.9.1.1 Intel®High Definition (Intel®HD) Graphics
The Intel® HD graphics controller features the following:
3D graphics hardware acceleration supporting Direct3D* 9/1011.1/11.2, DirectX*11, Direct2D,
OpenCL 2.0/2.1, OpenGL 5.0
Video decode hardware acceleration supporting AVC/H264, HEVC/H265, JPEG, MJPEG, MPEG2,
VC1/WMV9, VP8 and VP9 formats
Video encode hardware acceleration supporting AVC/H264, HEVC/H265, JPEG, MJPEG, MPEG2,
VC-1, VP8 and VP9
1.9.1.2 Video Memory Allocation
Intel®Dynamic Video Memory Technology (DVMT) is a method for dynamically allocating system
memory for use as graphics memory to balance 2D/3D graphics and system performance. If your
computer is configured to use DVMT, graphics memory is allocated based on system
requirements and application demands (up to the configured maximum amount). When memory
is no longer needed by an application, the dynamically allocated portion of memory is returned to
the operating system for other uses.

15
1.9.1.3 Integrated Audio
The following audio technologies are supported via the Digital Display Lanes using either
DisplayPort or HDMI:
AC3 Dolby* Digital
Dolby Digital Plus
DTS-HD*
LPCM, 192 kHz/16-bit or 176.4kHz/24-bit, 8 Channel
Dolby TrueHD, DTS-HD Master Audio*
1.10 Wireless LAN Subsystem
The Intel® Compute Card wireless LAN subsystem consists of the following:
Intel® Dual Band Wireless-AC 8265 module
1216 BGA soldered-down
For information about
Refer to
LAN software and drivers
http://downloadcenter.intel.com
1.10.1 Wireless Network Module
The Dual Band Wireless-AC 8265 module provides hi-speed wireless connectivity with the
following capabilities:
802.11a/b/g/n, 802.11ac
2.4 GHz, 5.0 GHz
Two antennas incorporated inside the Compute Card
Dual Mode Bluetooth 4.2
Supports Miracast* and Miracast Plus
Support for AMT 11.0 on CD1IV128MK
For information about
Refer to
Obtaining WLAN software and drivers
http://downloadcenter.intel.com
Full Specifications
http://intel.com/wireless
1.11 Authentication
The Intel® Compute Card and any device with a compatible slot for the Intel® Compute Card will use
bidirectional authentication. The Compute Card will attempt to authenticate the compatible device and
the compatible device will attempt to authenticate the Compute Card. The authentication uses digital
keys, which are provisioned by default during manufacturing for every Compute Card and Compute
Card compatible device. With this provisioning, the Intel® Compute Card will only work with correctly
provisioned Intel® Compute Card slot compatible devices.

16
1.12 Power Management
Power management is implemented at several levels, including:
Software support through Advanced Configuration and Power Interface (ACPI)
Hardware support:
Power Input
Instantly Available PC technology
Wireless LAN wake capabilities
Wake from USB (When plugged into a compatible device)
Wake from S5
1.12.1 ACPI
ACPI gives the operating system direct control over the power management and Plug and Play
functions of a computer. The use of ACPI with this Compute Card requires an operating system
that provides full ACPI support. ACPI features include:
Plug and Play (including bus and device enumeration)
Power management control of individual devices
A Soft-off feature that enables the operating system to power-off the Compute Card
Support for multiple wake-up events (see Table 5 on page 18)
Table 3 lists the system states based on how long the power switch is pressed, depending on how
ACPI is configured with an ACPI-aware operating system. Support is only available when the
Compute Card is plugged into a compatible device’s Compute Card slot.
Table 3. Effects of Pressing the Power Switch
If the system is in this state…
…and the power switch is pressed for
…the system enters this state
Off
(ACPI G2/G5 –Soft off)
Less than four seconds
Power-on
(ACPI G0 –working state)
On
(ACPI G0 –working state)
Less than four seconds
Soft-off/Standby
(ACPI G1 –sleeping state) Note
On
(ACPI G0 –working state)
More than six seconds
Fail safe power-off
(ACPI G2/G5 –Soft off)
Sleep
(ACPI G1 –sleeping state)
Less than four seconds
Wake-up
(ACPI G0 –working state)
Sleep
(ACPI G1 –sleeping state)
More than six seconds
Power-off
(ACPI G2/G5 –Soft off)
Note: Depending on power management settings in the operating system.

17
1.12.1.1 System States and Power States
Under ACPI, the operating system directs all system and device power state transitions. The
operating system puts devices in and out of low-power states based on user preferences and
knowledge of how devices are being used by applications. Devices that are not being used can be
turned off. The operating system uses information from applications and user settings to put the
system as a whole into a low-power state.
Table 4 lists the power states supported by the Compute Card along with the associated system
power targets. See the ACPI specification for a complete description of the various system and
power states.
Table 4. Power States and Targeted System Power
Global States
Sleeping States
Processor States
Device States
Targeted System
Power (Note 1)
G0 –working
state
S0 –working
C0 –working
D0 –working state.
Full power
G1 –sleeping
state
S3 –Suspend to RAM.
Context saved to
RAM.
No power
D3 –no power
except for wake-up
logic.
Power < 5 W (Note 2)
G1 –sleeping
state
S4 –Suspend to disk.
Context saved to disk.
No power
D3 –no power
except for wake-up
logic.
Power < 5 W (Note 2)
G2/S5
S5 –Soft off. Context
not saved. Cold boot
is required.
No power
D3 –no power
except for wake-up
logic.
Power < 5 W (Note 2)
G3 –mechanical
off
AC power is
disconnected
No power to the
system.
No power
D3 –no power for
wake-up logic.
No power to the system.
Service can be performed
safely.
Notes:
1. Total system power is dependent on the system configuration and peripherals powered by the system power supply.
2. Dependent on the standby power consumption of wake-up devices used in the system.

18
1.12.1.2 Wake-up Devices and Events
Table 5 lists the devices or specific events that can wake the Compute Card from specific states.
Table 5. Wake-up Devices and Events
Devices/events that wake up the system…
…from this sleep state
Comments
Power switch
S3, S4, S5
Only supported if compatible device has
a power switch
RTC alarm
S3, S4, S5 (Note 1, 3)
Wireless LAN
S3, S4, S5 (Notes 1, 2, 3, 4)
“S5 WOL after G3” supported
USB
S3, S4 (Note 3, 4)
Wake S4 controlled by BIOS option. Only
supported if compatible device has USB
ports.
Bluetooth
S3
PCIe controller on slot
S3, S4, S5 (Notes 1, 2)
Only supported if compatible device has
support for wake events
Notes:
1. Monitor will remain in “sleep” state from S3 resume.
2. “S5 WoL after G3” only supported w/Deep Sleep disabled
3. Wake from S4 only supported w/Deep Sleep disabled
4. Wake from device/event not supported immediately upon return from AC loss
5. Wake from S5 only supported on CD1IV128MK
NOTE
The use of these wake-up events from an ACPI state requires an operating system that provides
full ACPI support. In addition, software, drivers, and peripherals must fully support ACPI wake
events.
1.12.2 Hardware Support
Power management hardware features include the following when the Compute Card is plugged
into a compatible device’s slot:
Wake from Power Button signal
Instantly Available PC technology
Wireless LAN wake capabilities
Wired LAN wake capabilities
Wake from USB
Wake from S5
NOTE
The use of Wake from USB from an ACPI state requires an operating system that provides full
ACPI support.

19
1.12.2.1 Instantly Available PC Technology
Instantly Available PC technology enables the Compute Card to enter the ACPI S3 (Suspend-to-
RAM) sleep-state. While in the S3 sleep-state, the computer will appear to be off (the power
supply is off, and the front panel off). When signaled by a wake-up device or event, the system
quickly returns to its last known wake state. Table 5 on page 18 lists the devices and events that
can wake the Compute Card from the S3 state when the Compute Card is plugged into a
compatible device.
The use of Instantly Available PC technology requires operating system support.
1.12.2.2 Wired LAN Wake Capabilities
Wired LAN wake capabilities enable remote wake-up of the Compute Card through a network.
The Wired LAN subsystem monitors network traffic at the Media Independent Interface. Upon
detecting a Magic Packet* frame, the Wired LAN subsystem asserts a wake-up signal that powers
up the Compute Card. Only available when plugged into a compatible device that has support for
Wired LAN.
1.12.2.3 Wireless LAN Wake Capabilities
Wireless LAN wake capabilities enable remote wake-up of the Compute Card through a network.
The Wireless LAN subsystem monitors network traffic at the Media Independent Interface. Upon
detecting a Magic Packet* frame, the Wireless LAN subsystem asserts a wake-up signal that
powers up the Compute Card.
1.12.2.4 Wake from USB
USB activity wakes the Compute Card from an ACPI S3 and S4 states.
NOTE
Wake from USB requires the use of a USB peripheral that is plugged into a compatible device that
supports Wake from USB.
1.12.2.5 Wake from S5
When the RTC Date and Time is set in the BIOS, the Compute Card will automatically wake from
an ACPI S5 state.

20
1.13 Intel® Security and Manageability Technologies
Intel® Security and Manageability Technologies provides tools and resources to help small
business owners and IT organizations protect and manage their assets in a business or
institutional environment.
NOTE
Software with security and/or manageability capability is required to take advantage of Intel
platform security and/or management technologies.
1.13.1 Intel® vPro™ Technology
Only available on the CD1IV128MK. Intel® vPro™ Technology is a collection of platform
capabilities that support enhanced manageability, security, virtualization and power efficiency.
The key platform capabilities include:
Intel® Active Management Technology (Intel® AMT) 11.0
Intel® Virtualization (Intel® VT)
Intel® Virtualization for Directed I/O (Intel® VT-d)
Intel® Trusted Execution Technology (Intel® TXT)
Intel® Identity Protection Technology (Intel® IPT)
Trusted Platform Module 2.0 (TPM)
For information about
Refer to
Intel® vPro Technology
http://www.intel.com/content/www/us/en/support/technologies/in
tel-vpro-technology.html
1.13.1.1 Intel® Active Management Technology 11.0
Only available on the CD1IV128MK. When used with third-party management and security
applications, Intel® Active Management Technology (Intel® AMT) allows business owners and IT
organizations to better discover, heal, and protect their networked computing assets.
Some of the features of Intel® AMT include:
Out-of-band (OOB) system access, to discover assets even while PCs are powered off
Remote trouble-shooting and recovery, which allows remote diagnosis and recovery of
systems after OS failures
Hardware-based agent presence checking that automatically detects and alerts when
critical software agents have been stopped or are missing
Proactive network defense, which uses filters to block incoming threats while isolating
infected clients before they impact the network
Remote hardware and software asset tracking, helping to track computer assets and keep
virus protection up-to-date
Keyboard, video and mouse (KVM) remote control, which allows redirection of a managed
system’s video to a remote console which can then interact with it using the console’s
own mouse and keyboard