INVISIBLE FENCE Doorman User manual

Doorman™ Electronic Pet Door
My Invisible Fence® Brand Dealer:
Name:
Phone:
InvisibleFence.com | 800-578-3647
Owner’s Manual and Operating Guide

2
InvisibleFence.com
Important Precautions
• Invisible Fence® Brand pet containment systems have contained over three million pets. However, there are some
precautions you should take.
• Read and retain manuals: Read the entire Owner’s Manual before using your new Doorman™ Electronic Pet Door.
• Adhere to all warnings and cautions contained in any Invisible Fence Brand manual.
This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety
messages that follow this symbol to avoid possible injury or death.
indicates a hazardous situation which, if not avoided, could result in death or serious injury.
used with the safety alert symbol, indicates a hazardous situation which, if not avoided, could
result in minor or moderate injury
used without the safety alert symbol, indicates a hazardous situation which, if not avoided,
could result in harm to your pet.
is used to address safe use practices not related to personal injury.
WARNING
• When children are present in the home, it is important to consider the pet door during child proofing activities.
The pet door may be misused by a child resulting in the child accessing potential hazards that may be on the
other side of the pet door.
• Purchasers/Homeowners with swimming pools should ensure that the pet door is monitored at all times and
that the swimming pool has adequate barriers to entry. If a new hazard is created inside or outside of your home,
which may be accessed through the pet door, Invisible Fence Brand recommends that you properly guard access
to the hazard or remove the pet door.
• The closing panel or lock, if applicable, is provided for aesthetic and energy eciency purposes and is not
intended as a security device. Invisible Fence Brand will not be liable for unintended use and the purchaser of this
product accepts full responsibility for oversight of the opening it creates.
CAUTION
• This pet door is not a fire door. It is important for the owner and contractor to consider any risks that may be
present inside or outside of the pet door, and any risks that may be created by subsequent changes to your
property and how they may relate to the existence and use, including misuse of the pet door.
NOTICE
• The user, prior to installation, must become familiar with all building codes that may aect the installation of the
pet door and determine, along with a licensed contractor, its suitability in a given installation.
• Keep these instructions with important papers; be sure to transfer these instructions to the new owner of the
property.
• Unauthorized changes or modifications may void the user’s authority to operate this equipment, and void the
warranty.
2-Year Limited Warranty - The Invisible Fence Brand Doorman electronic pet door is warranted against
manufacture defects for a period of two (2) years from the date of original purchase at retail. Proof of purchase
may be required. Does not include gross neglect or abuse. Which includes but is not limited to dog chews, pet
scratches, and damage caused by improper use.

3
InvisibleFence.com
Congratulations on your purchase of the Invisible Fence® Brand Doorman™ Electronic Pet Door. When
professionally installed, the Invisible Fence Brand Doorman electronic pet door is backed with a one-year,
money-back performance guarantee. The Doorman electronic pet door provides access to your yard for your
pet giving them increased freedom and you peace of mind knowing you are providing an enriching yet safe
environment for them. The support of your Invisible Fence Brand Dealer provides additional confidence the
Doorman electronic pet door will operate as expected.
Table of Contents
Important Precautions ........................................................................................................................................................2
How the System Works ..................................................................................................................................................... 4
Operating Guide............................................................................................................................................................... 5-9
Features
Input/Output Controls
Set Up
Programming
Troubleshooting ..................................................................................................................................................................10
Terms and Use of Liability ............................................................................................................................................... 11
Battery Disposal .................................................................................................................................................................. 11
Compliance ......................................................................................................................................................................... 12

4
InvisibleFence.com
How the Doorman™ Pet Door Works
Using radio-frequency technology, the Invisible Fence® Brand Doorman
pet door reads the Computer Collar® SmartLink™ signal and triggers
the flap to unlock so the pet(s) can come and go as they please. When
the door no longer senses the pets’ Computer Collar unit; the flap
automatically locks back into place.

5
InvisibleFence.com
Features & Controls
Features
The Invisible Fence® Brand Doorman™ electronic pet door contains a variety of features and
abilities that can be controlled and configured by users. By utilizing the pet door’s Input and
Output Control capabilities a user may:
• Set the Clock
• Learn SmartLink™ II Code(s)
• Display SmartLink II Slots in Use
• Create a Schedule
• Turn Scheduling Function On or O
• Set Signal Activation Range Function
• Switch between Locked, Unlocked and Automatic modes
• Change frequencies settings between 7K and 10K
• Lock Pushbuttons to prevent tampering/adjustments
• View Low Battery Indicator.
Input & Output Controls
Input
• Push Buttons:
There are 6 push button switches available for users to control the various functions and settings
of the door. The buttons are shown below in Figure 1.
Going from left-to-right, top-to-bottom, the buttons are called
1. Clock Set
2. Learn
3. Schedule
4. (–) Down
5. (+)Up
6. Lock/Unlock/Auto
LCD Display
Control Panel Cover Screw
Mounting Keyhole
1 each side
Figure 1

6
InvisibleFence.com
• Wireless (RF):
The pet door has the ability to receive wireless radio frequency (RF) signals. Some functions,
such as the Learn function, utilize wireless signals to read new transmit codes associated with the
Computer Collar® receiver.
Output
• LCD Display:
The LCD Display is used to show various settings and
information about the door. It is comprised of various
LCD segments that can be activated or deactivated.
These fields are black when turned-on and can’t be seen
when turned-o. Figure 2 shows all possible segments that
may be on at any given time.
- Clock:
The clock is used for the schedule function. Upon
powering-up the pet door, the LCD clock defaults to
12:00 AM.
- SmartLink™ II
SmartLink II is the code transmitted by the Computer Collar unit that communicates with the
Invisible Fence® Brand Doorman™ electronic pet door. The Invisible Fence Brand Doorman
electronic pet door is capable of learning five unique SmartLink II codes. The first empty slot
(number 1 of 5) will be used to store the SmartLink II code. If all slots are full and a new code
is stored, the new code will overwrite the code currently stored in the first slot. If a duplicate
SmartLink II code is received, its slot is automatically selected and no additional empty slots
are utilized.
For houses with more than 5 pets you can program multiple Computer Collar units to the
same code. Units with the same code will be stored in the same slot. To change the code you
need to utilize the CF-3000 Dealer Tool.
- Showing SmartLink II Slots in Use
When the Learn button is pressed and released, all SmartLink II slots that contain an
authorized code will be displayed for a period of one second.
- Schedule:
The 24-hour day can be divided into two non-overlapping intervals, each with its own start
time and pet door setting (Auto/Locked/Unlocked). The Day and Night segments on the
LCD display are used to distinguish the intervals. Both a Day and Night schedule must be
programmed for the Doorman electronic pet door to operate in schedule modes. See ‘Switch
between Locked, Unlocked and Automatic Modes’ for more details on the door modes.
When Scheduling is turned on and an interval’s start time arrives, the pet door will make the
transition to the applicable pet door mode specified for that interval.
Figure 2

7
InvisibleFence.com
Output - Continued
- Range
The range determines the distance that a Computer Collar® unit is able to communicate
with the Doorman™ electronic pet door. There are five range settings that are available.
- Modes
Pressing the Lock/Unlock/Auto button will cause the pet door to transition to one of the
three available modes:
1. Auto
When the pet door is placed in Auto mode, it is automatically locked and will only
unlock when a programmed Computer Collar unit comes within proximity of the pet
door. The pet door will relock automatically when all programmed collars are out of
range for 10 seconds.
2. Locked
When the pet door is set to Locked mode, the pet door will lock and remain in that
mode until the next schedule interval occurs (if Schedule is on) or when the Lock/
Unlock/Auto button is pressed. When this mode is selected a programmed Computer
Collar unit has no eect on the pet door.
3. Unlocked
When the pet door is set to Unlocked mode, the pet door will unlock and remain
in that mode until the next schedule interval occurs (if Schedule is on) or when the
Lock/Unlock/Auto button is pressed. When this mode is selected a programmed
Computer Collar unit has no eect on the pet door.
If the Schedule mode is active when the Lock/Unlock/Auto button is pressed, the current
schedule interval’s pet door mode is overridden. The mode selected by the pressing of
the Lock/Unlock/Auto button takes precedence over the scheduled mode. When the
start time of the next schedule interval is reached, the original scheduled mode will be
reinstated.
Each time the Lock/Unlock/Auto button is pressed, the display advances to the next
mode, but does not physically change the state of the pet door to that specific mode.
Only when the Learn button is pressed or after no button is pressed for 20 seconds does
the pet door set to the specific selected mode.
- Disable Keypad Function
The Disable keypad function allows the user to disable the keypad. This will help prevent
unintended programing changes being made to the Doorman electronic pet door.
A one second tone will sound indicating the change has occurred and a message will
scroll across the display when the push buttons have been disabled reading as, “Keypad
Locked”. If any of the keys are pressed while the keypad is locked, a “Keypad Locked”
message will scroll across the LCD display.
- Low Battery Indication
The battery voltage is consistently measured once every 4 hours. If the reading is below
4.4 Volts each of the times it is checked within a 24-hour period, the Low Battery alarm
will activate. The pet door will beep and display “LOW BATT” on the LCD display once
every 20 seconds. The audible alarm can be disabled by pressing any of the keypad
buttons. If the audible alarm is disabled, the “LOW BATT” message will appear on the LCD
screen every 2 seconds.

8
InvisibleFence.com
Set-Up
Place Batteries in the Doorman™ Electronic Pet Door
1. Open the control panel door
2. With a Phillips screwdriver, remove the battery
compartment cover screw
3. Remove the battery compartment cover
4. Refer to the inside of the battery compartment
cover for the proper orientation of the four
C-Cell batteries
5. Replace the battery compartment cover and reinstall the screw
6. When the batteries are placed in the Invisible Fence® Brand Doorman™ electronic pet door
the LCD will illuminate for 1 second and turn o for 0.5 second.
NOTE: The door must be in the upright position for the flap to center properly and operate correctly.
Program Doorman Electronic Pet Door (see next page)
1. Set Clock
2. Set Range
3. Select Mode (Automatic, Locked, Unlocked)
4. Set schedule if desired

9
InvisibleFence.com
Programming the Doorman™ Electronic Pet Door
To Set the Clock
1. Hold Clock Set button until hours blink.
2. Press + or - buttons to adjust hours. Continue holding down to
roll over from AM to PM.
3. Press Clock Set button to change between hours and minutes.
4. Press + or - buttons to adjust minutes.
5. When correct time is displayed press Learn button or wait 30
seconds to save changes.
Set the Range
6. Press + or - buttons to adjust the activation range from 1-5.
To Select Mode
7. Press Lock/Unlock/Auto until desired mode is present.
To Schedule
- On/O
Press and release Schedule button to enable or disable schedule
mode.
- To Set the Schedule
NOTE: Schedule must be set for both DAY and Night.
1. Hold Schedule button until Schedule blinks.
2. Press Schedule button to select the schedule period (day or night)
3. Press + or - buttons to adjust the selected period’s start time.
4. Press Lock/Unlock/Auto button to select the period’s door mode.
5. Press Learn button or wait 30 seconds to save changes.
Disable and Enable the Push Buttons
1. Press the Down and Up buttons simultaneously and hold for at least
2 seconds to disable the key board.
2. Repeating the process will enable the keypad and return it to an
active state.
1 & 3
2 & 4
5

10
InvisibleFence.com
Symptom Possible Cause Action
Doorman™
electronic pet
door failed to set
Selected Mode
• Locking mechanism is jammed or
damaged
• The Doorman electronic pet door has
no power
• Check for obstructions near locking
mechanism
• Check power
• Contact local Invisible Fence® Brand
Dealer for service
Doorman electronic
pet door will not
unlock while in
Auto Mode
• Collar is not Learned to the Doorman
electronic pet door
• The Doorman electronic pet door has
no power
• Locking mechanism is jammed or
damaged
• Check if collar is Learned correctly
• Check power
• Contact local Invisible Fence Brand
Dealer for service
Doorman electronic
pet door will not
close/lock in Auto
Mode
• The Doorman electronic pet door has
no power
• Locking mechanism is jammed or
damaged
• Check for obstructions near locking
mechanism
• Check power
• Contact local Invisible Fence Brand Dealer
for service
Troubleshooting - System Issues

11
InvisibleFence.com
Terms of Use and Limitation of Liability
Need additional help? Contact your local Invisible Fence® Brand dealer. Call 1-800-578-3647
or visit www.InvisibleFence.com to find your local dealer.
TERMS OF USE
This Product is oered to you conditioned upon your acceptance without modification of the terms,
conditions and notices contained herein. Usage of this Product implies acceptance of all such terms,
conditions, and notices.
PROPER USE
This Product is designed for use with pets where training is desired. The specific temperament of your pet
may not work with this Product. If you are unsure whether this is appropriate for your pet, please consult
your veterinarian or certified trainer. Proper use includes reviewing the entire Operating Guide provided
with your Product and any specific Caution statements.
NO UNLAWFUL OR PROHIBITED USE
This Product is designed for use with pets only. This pet training device is not intended to harm, injure, or
provoke. Using this Product in a way that is not intended could result in violation of Federal, State or local
laws.
LIMITATION OF LIABILITY
In no event shall Radio Systems Corporation be liable for any direct, indirect, punitive, incidental, special
or consequential damages, or any damages whatsoever arising out of or connected with the use or
misuse of this Product. Buyer assumes all risks and liability from the use of this Product.
MODIFICATION OF TERMS AND CONDITIONS
Radio Systems Corporation reserves the right to change the terms, conditions and notices under which
this Product is oered.

12
InvisibleFence.com
Important Recycling Advice
Separate collection of spent batteries is required
in many regions; check the regulations in your
area before discarding spent batteries. The
Doorman™ electronic pet door operates on four
Alkaline batteries of the type C-cell with a 1.5
Volt, 8350 mAH capacity. Replace only with the
equivalent batteries.
Please respect the Waste Electrical and Electronic
Equipment regulations in your country. This
equipment must be recycled. If you no longer
require this equipment, do not place it in the normal
municipal waste system. Please return it to where it
was purchased so it can be placed in our recycling
system. If this is not possible, please contact your
Invisible Fence® Brand Dealer.
Compliance
US and Canada
Model: RAC00-17201
FCC ID: KE3-3003678
IC: 2721A-3003678
This device complies with Industry Canada license-
exempt RSS standard(s). This device complies with
Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not
cause interference, and (2) this device must accept
any interference, including interference that may
cause undesired operation of the device.
Le présent appareil est conforme aux CNR
d’Industrie Canada applicables aux appareils radio
exempts de licence. Cet appareil est conforme
à la partie 15 des régles FCC. L’exploitation est
autorisée aux deux conditions suivantes : (1)
l’appareil ne doit pas produire de brouillage, et (2)
l’utilisateur de l’appareil doit accepter tout brouillage
radioélectrique subi, même si le brouillage est
susceptible d’en compromettre le fonctionnement.
Caution: Modification or changes to this equipment
not expressly approved by Radio Systems®
Corporation may void the user’s authority to operate
the equipment.
This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However,
there is no guarantee that interference will not
occur in a specific installation. If interference does
occur to radio or television reception, which can be
determined by turning the equipment o and on, the
user is encouraged to try to correct the interference
by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and
the receiver. Connect the equipment to an outlet on
a circuit dierent from that to which the receiver is
connected. Consult the dealer, or an experienced
radio/TV technician for help.
This Class B digital apparatus complies with
Canadian ICES-003. Cet appareil numérique de
la classe B est conforme à la norme NMB-003 du
Canada.

13
InvisibleFence.com
800-578-3647 (USA)
[phone] (International)
400-1600-1
©2021 Radio System Corporation®
All rights reserved.
Protected by Patents:
U.S.: 7,046,152; 7,068,174; 7,204,204;