Ispring WSP-ARB User manual

Copyright ©2005-2019 ISPRING WATER SYSTEMS, LLC. All rights reserved.
Automatic Flush Module Installation and User ManualVer.04/2019

Introduction
This product is designed for use with the iSpring WSP-ARB spin down pre-filtration system.It
enables the system to flush automatically on a preset schedule.
Product Features
•HD touch screen
•3 flush modes (auto, semi-auto, manual)
•Installs in seconds
•Dual power supply, install with or without wall plug
•Built-in alarm and automatic self-diagnostic system
•Leak free
Warning
•Never clean the surface with bleach or corrosive
cleansing products.
•This product is for indoor use only.
•Any unauthorized modification/alteration to the system will void the product warranty.
iSpring is not responsible for any damages or injuries caused by such modifications.
Specifications
Internal Power
3 x AA battery (included)
External Power
100-240V ~50/60Hz 5V/1A
Temperature
40 °F - 104 °F
Flush Runtime
15s/30s/45s/60s/90s
Flush Frequency
1-99 days
Default Setting
Flush 15 seconds every 15 days
Parts list:
Power adapter, circlip, 3 x AA battery, module unit, touch screen control panel, and reset
button
Installation (for WSP-ARB systems without the module pre-installed)
•Prior to installation, inspect the package and make sure that all parts are included.
•After the installation, turn the manual switch on and off to make sure there is no
malfunctionor leak. Contact iSpring support at 678-261-7611 if you have any questions
or concerns.

Step 1:Make sure the ball valve switch is closed(in a level position).
Step 2: Remove the circlip and the ball valve knob.
Step 3: Install the battery or plug in the power supply. Insert the unit and make sure the ball
valve switch is aligned with the slot on the controller.Place the circlip back on the unit to secure
the connection.
User Guide
The system is preset to flush for 15 seconds every 15 days. This can be adjusted based on actual
water quality.
After the batteries are in place or the wall charger is connected to a power supply, the system
can be activated by pressing the home button. To restart the system, press and hold the home
button for 8 seconds. The system will perform a self diagnostic after a restart. This process lasts
for 15 seconds and the flushing indicator will be flashing. The system cannot be operated during
this time.
To set a schedule, activate the system by pressing the home button. The number that appears
on the screen indicates the number of days until the next flush. Press the setting indicator on
the screen.After a short beep, the number will flash. Press + - on the screen to adjust the
flushing frequency (ranging from 1- 99 days.) Press the setting indicator again, the number that
shows the flush runtime will appear. Use the + - on the screen to adjust(choose from 15, 30, 45,
60, or 90 seconds.) The number will flash for 3-5 seconds then be saved to settings.
To manually flush the system, simply press the home button and tap the "Flush" icon,which will
trigger the ball valve controller to open the attached ball valve. Based on the flush setting, a
countdown will appear on the screen; the number "0'' indicates that the flush has been finished
and the ball valve switch is back to the "off" position.

Trouble shooting
Error Code
Cause
Solution
E0
No power(when running in
battery only mode)
Replace the battery
E1
Ball valve cannot be opened fully
Restart the system
E2
Ball valve cannot be closed fully
Restart the system
CUSTOMER SATISFACTION AND WARRANTY REGISTRATION
To register your product for the warranty, please visit our website at 123filter.com and go to the
“Warranty Registration” tab.
We provide a 30-day money back guarantee, a 1-year manufacturer warranty, and lifetime tech support
for all of our products. If you ordered from a website other than 123Filter.com (Amazon, Home Depot,
etc.), please be sure to fill in your order information upon registration of your system. If you have any
questions or concerns about your product, please do not hesitate to call or email us, or you can use the
notes/comments section upon your warranty registration. Your satisfaction is key to our business!
If you are happy with our products and service, please show your support by
writing a product review on Amazon. Even just a single line takes you just a
minute, but means a lot to us. Thank you!
How to Contact Us
Office Hours:Monday-Friday, 8:30 am - 5:30 pm EST
Phone: [phone]
Email: [email protected]