Ispring WSP Series User manual

Copyright ©2005-2019 ISPRING WATER SYSTEMS, LLC. All rights reserved.
WSP SERIES USER MANUAL Ver.10/2019

OVERVIEW
iSpring WSP and WSP-SL
Reusable Spin-down Sediment Water Filter Systems
The WSP spin-down sediment filter is the first line of defense for your plumbing system,
faucets, and appliances. By removing dirt, sand, and rust particles, it protects and
extends the life of your standard filters. It also prevents the faucets from being damaged
by “grinding.” Statistics show that it saves up to 20% of water consumption from being
wasted by “dripping faucets” in commercial and public buildings.
The iSpring WSP should be installed as a pre-filter, and the WSP-SL is used for hot
water heaters to prevent scale buildup. The WSP and WSP-SL are flushable and
reusable. With just a toggle of a switch, they can flush out particles that are trapped in
the filter without needing to shut down the water supply first.

BEFORE INSTALLATION
Please read the following information carefully and completely before installation.
SPECIFICATIONS
The WSP is made of FDA-grade, high impact stainless steel mesh and offers a pore
rating of 50, 100, 200, 500, or 1000 microns.
The WSP-SL includes a powerful anti-scale and corrosion agent called Siliphos, an
ultra-safe water treatment compound. It contains a glass-like Polyphosphate with
Sodium, Calcium Magnesium and Silicate, formulated specifically for scale prevention.
•Dry weight: 1 lb
•Dimensions: 3.5" width x 9" height
•Suitable temperature range: 40 - 100 °F
•Suitable pressure range: 20 - 90 psi
The 1-inch outlet MNPT fitting provides a maximum 20
GPM flow rate. The WSP and WSP-SL also feature 3/4
inch NPT threads on the inlet and outlet.
CHOOSING THE RIGHT FILTER SIZE
The WSP spin-down sediment filter series
comes with a variety of options in terms of
micron size. Choose the right filter cartridges
with different micron ratings and filter media
depending on the quality of your source water
and contaminants. We recommend using multi-
stage filters to achieve the best filtering results and longer cartridge life.

Smaller microns allow fewer particles through, but to get most life and efficiency out of
your filters, it’s important to only go as small as you need. Differences in water quality
and your water pressure
affect the performance of
the WSP.
Please avoid the mistake of
using 'fine' filters for 'rough'
water, which will cause the
filters to clog sooner than
expected.
INSTALLATION
WHERE TO INSTALL
Install this filter in a place where it will be easy to access and maintain.
This product is NOT designed to be installed outdoors or in a place that is
exposed to direct sunlight.
The filter should not be exposed to freezing temperatures, overheating, corrosive
materials. If the product has to be installed outdoors, please create a weather proof
enclosure for the filter. Please note that installing the system in a place other than
recommended will void the warranty.
HOW TO INSTALL
To suit different plumbing sizes, the unit comes with two types of threads on both ends:
1 inch MNPT and ¾ inch FNPT. The flush out valve has a garden hose barb fitting.
The 1 inch MNPT may be directly mounted onto the 1 inch FNPT inlet port of a whole
house filtration system. It is recommended that you have an inlet valve and outlet valve
before and after the unit.
The WSP should be installed as a first layer of filtration for the water source before a
larger filtration system. The WSP-SL prevents scale and corrosion in your water supply
and should be installed after the water inlet to your water heater.

MAINTENANCE
The filters’ see-through housing offers easy visual monitoring. To ensure filter
performance, the unit should be flushed out at least once per week. To flush, connect a
garden hose to the flush valve, turn off the outlet valve, turn on the inlet valve, and flush
the valve.
Observe the stainless-steel mesh once per month. To clean the mesh, twist off the clear
housing and use vinegar to remove any mineral deposits. Replace the mesh every 12 to
24 months. Replace the mesh with Siliphos every 3 months or depending on usage.
You can also visit our YouTube channel for more installation and maintenance videos.

iSpring Whole House Systems
Comparison Sheet

CUSTOMER SATISFACTION AND WARRANTY REGISTRATION
To register your product for the warranty, please visit our website at 123filter.com and
go to the “Warranty Registration” tab.
We provide a 30-day money back guarantee, a 1-year manufacturer warranty, and
lifetime tech support for all of our products. However, we do not have the order
information from websites other than 123Filter.com (Amazon, Home Depot, etc.), so
please be sure to fill in that information upon registration of your system. If you have any
questions or concerns about your product, please do not hesitate to call or email us, or
put it in the notes/comments upon your warranty registration. Your satisfaction is our
business!
If you are happy with our products and service, please show your support
by writing a product review on Amazon. Even just a single line takes you
just a minute, but means a lot to us. Thank you!
How to Contact Us
Office Hours: Monday-Friday, 8:30 am - 5:30 pm EST
Phone: [phone]
Email: [e-mail]

iSpring Water Systems, L.L.C.
3020 Trotters Pkwy
Alpharetta, GA 30004
[phone]