Itamar Medical WatchPAT Manual

www.itamar-medical.com
®
www.itamar-medical.com
®
®®
Disposable Home Sleep Apnea Test Disposable Home Sleep Apnea Test
For step-by-step video instruction
please visit
watchpatone-howtouse.com
If you have any questions
you may contact
Itamar®Medical Help Desk at:
1-888-748-2627
Step by Step Instructions Guide
Scan the QR code below to download
the WatchPAT®ONE Application
Itamar Medical Ltd.
9 Halamish Street, PO box 3579
Caesarea Ind. Park, 3088900 Israel
T: [phone], F: [phone]
The Squaire 12, Am Flughafen
60549 Frankfurt am Main
Germany
Important Notes:
• Storage and operation
temperatures 0oC - 40oC
• Do not attempt to connect or
disconnect any part of the unit.
• Do not try to introduce any
foreign object into the unit.
• Do not, under any
circumstances, attempt to fix a
problem by yourself.
• The WatchPAT®ONE should not
cause any discomfort or pain.
Should you encounter
unbearable discomfort, remove
the device and call the help desk.
Arazy Group Gmbh
Technical Information Labeling
Caution: Federal Law Restricts this device to sale by or on
the order of a licensed healthcare practitioner
Single use, do not re-use
Temperature limit 0oC - 40oC
Refer to instruction for use
Battery operating voltage
Ingress protection
Type BF applied part
Federal communications commision identification number
Medical device manufacturer
Catalogue number
Serial number
Date of manufacture
Use-by date
The product is marked with the CE logo 2797 for BSI
Authorized representative in the European Community
Fragile, Handle with care
Keep dry
According to the WEEE Directive 2012/19/EU, all waste
electrical and electronic equipment (EEE) should be collected
separately and not disposed of with regular household waste.
Please dispose this product and all of its parts in a
responsible and environmentally friendly way.
REF OM2193390 - Ed.2
For step-by-step video instruction
Visit watchpatone-howtouse.com

WatchPAT®ONE
Disposable Home Sleep Apnea Test
Step by Step Instructions Guide
This guide will take you step by step and show you how to
correctly use the WatchPAT®ONE Home Sleep Apnea Test.
Before applying WatchPAT®ONE:
It is recommended to apply the WatchPAT®ONE device to
your non-dominant hand.
Probe can be worn on any finger, except the thumb.
Before use, remove tight clothes, rings, watches and
other jewelry.
Remove nail polish and artificial nails from the test finger
and make sure the fingernail is cut short.
Note: Use only Alkaline AAA battery.
Do not insert the battery until you are ready to go to bed.
1. Before you proceed with your sleep study make sure you
have internet access, your phone, WatchPAT®ONE device,
and PIN number.
Phone WatchPAT® ONE Internet Access PIN Number
2. Download the WatchPAT®ONE application to your mobile
device (available on Apple App Store
and Google Play Store).
3. Open the WatchPAT®ONE application and allow
all permissions required by the application. These
permissions are necessary for the application to operate.
Take out the WatchPAT®ONE from the box. You can click
the “Preview” button on the application to have a quick tour,
showing how to set up the device.
Press “Ready” button when done.
PREVIEW
READY
8. Take the chest sensor (snoring and body position sensor)
and direct the cable in through your
sleeve and out through the neck opening.
Remove the tab from the sticker and
attach the sensor just below your sternal
notch.
* If your WatchPAT®ONE device does not
include the chest sensor, skip this step.
NEXT
NEXT
NEXT
NEXT
NEXT
ENTER
7. Put the WatchPAT®ONE device
on your non-dominant hand.
Ensure it is not too tight and not
too loose.
6. Enter the 4-digit PIN code
provided by your physician’s office
or provider, and press “Enter”.
5. Remove your watch and
jewelry from your test hand.
4. Insert the battery into
the WatchPAT®ONE
device.
ENTER PIN
Enter your assigned four digit PIN (personal
identification number) and tap ENTER
Baery
9. Place the probe all the way onto a finger of your
non-dominant hand. You may use any finger except
the thumb. The probe should be inserted so
the sticker marked TOP is positioned
above the fingernail. Hold the probe
against a hard surface and slowly
pull the TOP tab towards you to
remove it from the probe.
a. Make sure your phone is located no more than 15 feet/
5 meters from the WatchPAT®ONE device.
b. Turn off all other transmitting devices in the room,
such as other smart phones, smart watches and
headphones, as they could interfere with the test.
c. Connect your phone to the charger, it must remain
plugged in throughout the night. If you need to get up
during the night leave the phone plugged in, no need to
carry it with you.
Now click the “Start” button to begin your sleep study.
START
11. In the morning when you wake up, press the
“End Recording” button, and wait a few minutes
for the device to complete the data transmission.
After completing the data transmission you will
receive a thank you message.
Once received press “Close Application”.
END RECORDING
CLOSE APPLICATION
12. Remove the chest sensor, probe and WatchPAT®ONE
device. There is no need to keep the device or return it.
You can simply dispose of it.
Press “Next” when done.
Press “Next” when done.
Press “Next” when done.
Press “Next” when done.
10. You are all set.
Last few steps before you begin your sleep study:
Press “Next” when done.