Itamar Medical OM2196335 User manual

WatchPAT™200 Unified
Operation Manual
Itamar Medical REF OM2196335
Caution: Federal law restricts this device to sale by or on the order of a licensed healthcare
practitioner
Copyright 2015-2020 By Itamar Medical Ltd.
WatchPAT™ and PAT®are trademarks of Itamar Medical, Ltd.

WatchPAT™200U System i Operation Manual
This manual and the information contained herein are confidential and are the sole property
of Itamar Medical Ltd.Only Itamar Medical Ltd. or its licensees have the right to use
this information. Any unauthorized use, disclosure or reproduction is a direct violation of
Itamar Medical’s proprietary rights.
DISCLAIMER
Itamar Medical Ltd. shall not be held responsible in any manner for any bodily injury
and/or property damage arising from operation or use of this WatchPAT™200 Unified
other than that which adheres strictly to the instructions and safety precautions contained
herein and in all supplements hereto and according to the terms of the warranty provided in
the License Agreement in Appendix C.
Itamar Medical Ltd.
9 Halamish St., P.O. Box 3579
Caesarea Ind. Park, 3088900, Israel
Tel: International + 972-4-617-7000, US 1-888-7ITAMAR
Fax + 972 4 627 5598
www.itamar-medical.com
This product and/or method of use, is covered by one or more of the following US patents: 6319205,
6322515, 6461305, 6488633, 6916289, 6939304, 7374540, as well as any pending US patent applications and
corresponding patents and/or applications filed in other countries.
EN ISO 13485:2016
See appendix D for contact information of the regulatory authorized representative

WatchPAT™200U System ii Operation Manual
Record of Editions
Edition
Date
Description
Chapter
Pages
1 (based on
OM2196331 Ed.6
and Ed.7)
Oct 2015
ARMS –correcting typo
App.G
64
2
Jan 2016
Updating company logo
Updating - Symbols Used on the
Product Labels, adding WEEE
symbol
-
1.11
-
8
3
June 2016
Updating Manufacturing
Declarations
App.F
60
4
July 2017
Update Rx caution
Adding eIFU indicator symbol
Update Company & product
Standards
Update French translation of
Safety Precautions
Update symbols and label
Update FDA clearance #
Updating Overview section to
include SBP/RESBP
Update SBP section to include
RESBP data
Update Tamper-Proof bracelet
photos (new design)
Update maintenance instructions
to include routine maintenance
Added instr. when using
SBP/RESBP sensor
Updating Attaching the uPAT
probe
Update specification table
Update address
Updating Manufacturing
Declarations
Added RESBP when referring to
snoring and BP sensor
Update photos to include the
RESBP sensor
-
-
-, 1.6
1.10
1.11, 1.12
1.13
2
4.1
All
6
7.1,8.2, App.A
8.3
10
App.C
App.F
All
All
-
ii
i, 3-4
6
7-8
8
9
24
All
29-33
34,39,
44-49
39
43
57
60-64
All
All

WatchPAT™200U System iii Operation Manual
5
Jan 2018
Updating CE marking with the
accompanying BSI notified body
number 0086
Updating Intertek certification
marks
Deleting information in App H
Adding zzzPAT HW
requirements and information
regarding Manual
-,1.11, 1.12
-, App.H
i, 7-8
iii, 68
6
March 2019
Updating CE marking with the
new notified body number 2797
Updating standards
-,1.11, 1.12
all
i,7-8
all
7
Sep 2019
Updating standards
Update Tamper-Proof Bracelet
instructions
Update EU REP address
1.6
4.2
App D
3-4
26
58
8
Jan 2020
Added warning for double night
4.3
27
9
Feb 2020
Add restriction for AHIc
Changed from Exclusion Criteria
to Precautions
Change Precautions wording for
arrhythmias
1.2
1.3
1.3
2
2
2
10
Sep 2020
Remove CE Mark, explanation
and classification related to
MDD
Updating device label
1.6, 1.7
1.10, 1.11
i, 2, 4
7-8
Note:
Latest version of the WatchPAT™ system Operation Manual is available at:
http://www.itamar-medical.com/Support/Downloads.html
zzzPAT Software Manual is also available on the zzzPAT installation CD and is installed as part of
the software installation.
Printed copy will be provided within 7 calendar days if requested at no additional cost.

WatchPAT™200U System iv Operation Manual
Table of Contents
1GENERAL INFORMATION..................................................... 1
1.1 Intended Use / Indications for Use ........................................................ 1
1.2 Restrictions for Use................................................................................1
1.3 Precautions .............................................................................................2
1.4 Data Generated by the WatchPAT™200U ............................................. 2
1.5 Quality Assurance System: EN ISO 13485............................................3
1.6 CSA Compliance ..................................................................................... 4
1.7 Conventions Used in this Manual.......................................................... 4
1.8 Warnings, Cautions and Notes.............................................................. 5
1.9 Safety Precautions.................................................................................. 6
1.10 Symbols Used on the Product Labels...................................................7
1.11 WatchPAT™200U Device Labels ...........................................................8
1.12 FDA information......................................................................................8
2OVERVIEW............................................................................. 9
2.1 System Description............................................................................... 10
2.2 User Interaction with the WatchPAT™ Device Keys.......................... 12
2.3 WatchPAT™ Device Function.............................................................. 13
2.4 Built-In Self-Diagnostic Procedures.................................................... 14
3PREPARATION FOR SLEEP STUDY...................................19
3.1 Charging the Battery............................................................................. 19
3.2 Preparing the Snore and Body Position Sensor ................................ 20
3.3 Preparing the Wrist Strap..................................................................... 20
3.4 Mounting the WatchPAT™ on the Wrist Strap ................................... 21
3.5 Replacing the uPAT Probe................................................................... 21
3.6 Preparing the WatchPAT™ Device for a New Study .......................... 22
3.7 Testing the WatchPAT™ Device .......................................................... 22
3.8 WP200U Self-diagnostic Test Results and Trouble-shooting........... 22
3.9 Packing the Carrying Case................................................................... 23
4OPTIONAL FUNCTIONS.......................................................24
4.1 Using the integrated Snore & Body Position Sensor......................... 24
4.2 Tamper-Proof Testing with WatchPAT™ Device................................ 25
4.3 Multi-night study................................................................................... 27
5DATA DOWNLOAD AND ANALYSIS ...................................28
6MAINTENANCE.....................................................................29
6.1 Cleaning................................................................................................. 30
6.2 Handling................................................................................................. 31

WatchPAT™200U System v Operation Manual
6.3 Replacing the uPAT Probe Cable ........................................................ 31
6.4 Replacing the Battery ........................................................................... 32
6.5 Setting the Time and Date of the WatchPAT™ device....................... 33
6.6 Storing the WatchPAT™ device........................................................... 33
7APPLYING THE WATCHPAT™ DEVICE..............................34
7.1 Preparing for Use of the WatchPAT™ Device .................................... 34
7.2 Applying the WatchPAT™ Device ....................................................... 35
7.3 Attaching the uPAT Probe.................................................................... 35
7.4 Switching On the WatchPAT™ device ................................................ 37
7.5 When You Wake Up .............................................................................. 37
7.6 Important Notes..................................................................................... 38
8PATIENT TRAINING –GUIDELINES...................................39
8.1 Walk Through the Process of Using the WatchPAT™ device........... 39
8.2 Product Introduction............................................................................. 39
8.3 Applying the WatchPAT™ device........................................................ 39
8.4 Switching on the WatchPAT™ Device ................................................ 40
8.5 Removing the WatchPAT™ Device ..................................................... 40
8.6 Patient Training..................................................................................... 40
8.7 Review Safety, General and Functional Issues.................................. 40
9TROUBLESHOOTING GUIDE...............................................41
9.1 Operator Error Messages..................................................................... 41
9.2 Patient Error Messages ........................................................................ 42
10 SPECIFICATIONS .................................................................43
APPENDIX A: WATCHPAT™ INTEGRATED SNORING + BODY
POSITIONING SENSOR OPERATING INSTRUCTIONS (SBP/RESBP)
...........................................................................................................44
APPENDIX B: TAMPER-PROOF TESTING WITH WATCHPAT™ .50
APPENDIX C: LICENSE AGREEMENT...........................................52
APPENDIX D: REGULATORY REPRESENTATIVE........................58
APPENDIX E: DESCRIPTION OF THE WATCHPAT™200U UPAT
PROBE...............................................................................................59
APPENDIX F: MANUFACTURING DECLARATIONS ACCORDING
TO IEC 60601-1 & 60601-1-2...............................................................60
APPENDIX H: ZZZPAT HARDWARE REQUIREMENTS.................68
APPENDIX I: SPARE PARTS LIST ...................................................69

WatchPAT™200U System vi Operation Manual
List of Figures
Figure 1 –Packed Device ................................................................................... 11
Figure 2 –WatchPAT™200U Device with Sensors........................................... 11
Figure 3 –The Buttons and Display .................................................................. 12
Figure 4 –Service Ports and Peripherals.......................................................... 13
Figure 5 –WatchPAT™ Wrist Strap................................................................... 13
Figure 6 –Charging the WatchPAT™ Device ................................................... 19
Figure 7 –Disconnecting the Probe .................................................................. 21
Figure 8 –Probe Disconnected.......................................................................... 21
Figure 9 –WatchPAT™ Fully Prepared............................................................. 22
Figure 10 –WatchPAT™ Device with Tamper-Proof Bracelet......................... 25
Figure 11 –Bracelet on Patient's Hand ............................................................. 25
Figure 12 –WatchPAT™ Device with Cable for Bracelet................................ 26
Figure 13 –WatchPAT™ Device with Bracelet ................................................. 26
Figure 14 –Bracelet and WatchPAT™ Device on a Patient’s Hand................ 26
Figure 15 –Cut the Bracelet............................................................................... 26
Figure 16 –Case for 3 Night Multi-night Study................................................. 27
Figure 17 –uPAT Probe Cable with Screw........................................................ 31
Figure 18 –Replacing the uPAT Probe ............................................................. 32
Figure 19 –Replacing the Battery...................................................................... 33
Figure 20 –Finger Designation.......................................................................... 34
Figure 21 –Putting On The Wrist Strap............................................................. 35
Figure 22 –Wearing the WatchPAT™ Device ................................................... 35
Figure 23 –Placing Finger In uPAT Probe........................................................ 36
Figure 24 –Removing TOP Tab ......................................................................... 36
Figure 25 –Wearing the WatchPAT™– Ready for Sleep.................................. 36
List of Tables
Table 1 –Operator Troubleshooting.................................................................. 41
Table 2 –Patient Troubleshooting..................................................................... 42
Table 3 –WatchPAT™200U Specifications....................................................... 43

WatchPAT™200U System 1 Operation Manual
1 GENERAL INFORMATION
This manual is part of the WatchPAT™200 Unified system.
1.1 Intended Use / Indications for Use
The WatchPAT™200U (WP200U) device is a non-invasive home care device for use with
patients suspected to have sleep related breathing disorders. The WP200U is a diagnostic
aid for the detection of sleep related breathing disorders, sleep staging (Rapid Eye
Movement (REM) Sleep, Light Sleep, Deep Sleep and Wake), snoring level and body
position. The WP200U generates a peripheral arterial tonometry ("PAT") Respiratory
Disturbance Index ("PRDI"), Apnea-Hypopnea index ("PAHI"), PAT sleep staging
identification (PSTAGES) and optional snoring level and body position discrete states from
an external integrated snoring and body position (SBP) sensor. The WP200U's PSTAGES
and SBP provide supplemental information to its PRDI/PAHI. The WP200U's PSTAGES
and SBP are not intended to be used as the sole or primary basis for diagnosing any sleep
related breathing disorder, prescribing treatment, or determining whether additional
diagnostic assessment is warranted.
The WatchPAT™200U device is not indicated for children less than 12 years old.
1.2 Restrictions for Use
1. The WP200U should be used only in accordance with physician’s instructions. For
precautions see Section 1.3.
2. Only qualified medical personnel may authorize the use of the WP200U.
3. Qualified medical personnel must instruct the patients (and accompanying
individual if needed) how to attach and use the WP200U prior to use.
4. In the event of equipment malfunction all repairs should be executed by authorized
Itamar Medical Ltd. personnel or licensed service agents.
5. The eligibility of a patient for a PAT® study is entirely at the discretion of a
physician, and is generally based upon the patient’s medical status.
6. The WP200U system in whole, or in part, may not be modified in any way.
7. The WP200U is used as an aid for diagnostic purposes only, and should not be used
for monitoring.
8. Only suitably trained and qualified personnel should be authorized to prepare the
WP200U equipment prior to use.
9. The WP200U Operation Manual should be carefully studied by the authorized
operators, and kept where it is easily accessible. Periodic review of the Manual is
recommended.
10. Itamar Medical Ltd. makes no representation whatsoever, that the act of reading the
Manual renders the reader qualified to operate, test or calibrate the system.
11. The tracings and calculations provided by the WP200U system are intended as tools
for the competent diagnostician. They are explicitly not to be regarded as a sole
incontrovertible basis for clinical diagnosis.

WatchPAT™200U System 2 Operation Manual
12. In the event that the system does not operate properly, or if it fails to respond to the
controls in the manner described in this Manual, the operator should refer to the
Troubleshooting section. If necessary, contact our service office to report the
incident, and to receive further instructions.
13. The step by step instructions for the patient should be carefully followed when
attaching the unit to the patient.
14. The WP200U is not indicated for children less than 12 years old.
15. The AHIc was not clinically assessed for patients who are in high altitudes or for
patients using opioids.
1.3 Precautions
The WatchPAT™200U should not be used in the following cases:
1. Use of one of the following medications: alpha blockers, short acting nitrates (less
than 3 hours before the study).
2. Permanent pacemaker: atrial pacing or VVI without sinus rhythm.
3. Sustained* non-sinus cardiac arrhythmias.
* In the setting of sustained arrhythmia the WatchPAT’s automated algorithm might
exclude some periods of time, resulting in a reduced valid sleep time. A minimum
valid sleep time of 90 minutes is required for an automated report generation.
1.4 Data Generated by the WatchPAT™200U
The WatchPAT™200U generates a PAT respiratory disturbance index (“PRDI”) and its
derivative, the PAT Apnea-Hypopnea Index (“PAHI”) and PAT sleep staging identification
("PSTAGES"). The PAHI and PRDI are estimates of conventional RDI and AHI values and
REM, DEEP SLEEP, LIGHT SLEEP, and WAKE stages identification that are produced
by polysomnography (“PSG”). The WatchPAT™200U also generates optional acoustic
decibel detector used for snoring level and body position discrete states from an external
integrated snoring and body position (SBP/RESBP) sensor.

WatchPAT™200U System 3 Operation Manual
1.5 Quality Assurance System: EN ISO 13485
The Itamar Medical WP200U is compliant to the following standards.
STANDARD
#
1.
Medical electrical equipment –Part 1: General requirements
for basic safety and essential performance
IEC 60601-1
ANSI/AAMI ES60601
CAN/CSA -C22.2
No.60601-1
2.
Medical electrical equipment –Part 1-2: General
requirements for basic safety and essential performance -
Collateral standard: Electromagnetic compatibility -
Requirements and tests
IEC 60601-1-2
3.
Medical Device Software –Software Life Cycle Processes
IEC 62304
4.
Medical electrical equipment -- Part 1-11: General
requirements for basic safety and essential performance --
Collateral standard: Requirements for medical electrical
equipment and medical electrical systems used in the home
healthcare environment
IEC 60601-1-11
5.
Degrees of protection provided by enclosures (IP Code) –
IP22
IEC 60529
6.
Medical devices - Application of usability engineering to
medical devices
BS EN 62366
7.
Medical electrical equipment - Part 1-6: General
requirements for basic safety and essential performance -
Collateral standard: Usability
IEC 60601-1-6
8.
Medical devices. Application of risk management to
medical devices
EN ISO 14971
9.
Medical devices. Symbols to be used with medical device
labels, labelling and information to be supplied. General
requirements
ISO 15223-1
10.
Graphical symbols for electrical equipment in medical
practice
IEC TR 60878
11.
Graphical symbols - Safety colours and safety signs --
Registered safety signs; refer to instruction manual/ booklet
ISO 7010-M002
12.
Information supplied by the manufacture with medical
devices
EN 1041
13.
Biological evaluation of medical devices - Part 1:
Evaluation and testing
ISO 10993-1
14.
Medical electrical equipment - Part 2-61: Particular
requirements for basic safety and essential performance of
pulse oximeter equipment
ISO 80601-2-61
15.
FDA Quality Systems Regulation (QSR)
21 CFR part 820
16.
Medical devices. Quality management systems.
EN ISO 13485:2016

WatchPAT™200U System 4 Operation Manual
Requirements for regulatory purposes
17.
RoHS Directive 2011/65/EU (RoHS2)
RoHS - Directive
2011/65/EU
1.6 CSA Compliance
The product is certified by CSA.
1.7 Conventions Used in this Manual
Note: Throughout this document, the references WatchPAT™, WatchPAT™200U and
WP200U device are used to refer to the WatchPAT™200 Unified device.
Note: Throughout this document, the reference Snore & Body Position sensor is referring
to both SBP sensor and RESBP sensor unless specified otherwise.
Warnings are used to identify conditions or actions, which - if the
instructions are ignored - may violate patient safety, or cause
damage/malfunction to the system, resulting in non recoverable loss of
data.
Les avertissements sont utilises pour identifier les conditions ou les
actions qui- si elles sont ignorées- peuvent porter atteinte à la sécurité
des patients ou causer des dommages au système et résulter à une
perte irréversible des données.
Cautions are used to identify conditions or actions, which could cause
interference with data acquisition and/or impair study results.
Les précautions sont utilisées affin d’identifier les conditions ou les
actions qui peuvent interférer avec le ramassage de données et
provoquer des résultats équivoque.

WatchPAT™200U System 5 Operation Manual
Notes are used to identify an explanation, or to provide additional
information for purposes of clarification.
Les notes sont utilisées pour identifier les explications et pour donner des
informations supplémentaires dans le but de clarifier.
1.8 Warnings, Cautions and Notes
The WP200U is internally powered from a 4.2 V battery.
The WP200U is portable with continuous operation.
The WP200U uses BF patient applied parts.
The WP200U uses UL listed power supply (USA & Canada only).
The power supply is used in a non-patient environment only.
The WP200U should only be transported in its original case.
There are no serviceable parts inside the WP200U.
Environmental conditions during transportation & storage: See Specifications section.
Environmental conditions during operation: See Specifications section.
Sleep professionals (other than patients) using the WP200U should read the Operation
Manual.

WatchPAT™200U System 6 Operation Manual
1.9 Safety Precautions
WARNINGS
Use only the AC adapter provided (5V DC, 5W maximum capacity power
supply). Only authorized personnel may charge the WP200U. Failure to heed
this warning may cause permanent damage to the equipment.
Do not let the unit get wet.
Avoid placing food or water on any part of the system.
In the event of fire use only fire extinguishers approved for use on electrical
fires.
Handle unit with care. This unit is sensitive to extreme movements and to
falling.
Do not attempt to connect or disconnect any part of the unit.
Do not try to introduce any foreign object into the unit.
The WP200U MUST be charged ONLY after being removed from the
patient!
The WP200U MUST be removed from the patient BEFORE connecting it to
a PC!
AVERTISSEMENTS
Utiliser uniquement l'adaptateur CA fourni avec le dispositif (5V DC, 5W
alimentation maximale). Seuls les techniciens autorisés peuvent recharger
le dispositif WP200U. Cet avertissement est essentiel pour éviter des
dommages irréparables à l’équipement.
Ne pas mouiller l’unité.
Éloigner le dispositif de toute source d'eau ou nourriture.
En cas d'incendie, utiliser uniquement des extincteurs homologués pour
l'utilisation en cas d'un incendie dû à une source électrique.
Manier avec précaution. L’unité est fragile : éviter les mouvements
soudains et chute.
Ne pas tenter de brancher ou débrancher une des parties de l’unité.
Ne pas introduire un corps étranger a l’intérieur de l’unité.
Le système WP200U doit être rechargé uniquement après avoir été
détaché de la main du patient.
Il est impératif de détacher le système WP200U de la main du patient avant de
le relier à l'ordinateur.

WatchPAT™200U System 7 Operation Manual
1.10 Symbols Used on the Product Labels
Follow instructions for use
Type BF applied part
The product is certified by CSA
Date of manufacture
Battery Operating Voltage
Single use, do not re-use
Temperature limit
Use-by date
Medical device Manufacturer
Catalogue Number
Serial Number
IP22
Ingress protection
The device is protected against insertion of fingers and
vertically dripping water shall have no harmful effect
when the device is tilted at an angle up to 15° from its
normal position
Authorized representative in the European Community
YYYY-MM-DD
3.7V DC

WatchPAT™200U System 8 Operation Manual
Caution: Federal law restricts this device to sale by or on the
order of a licensed healthcare practitioner
According to the WEEE Directive 2012/19/EU, all waste
electrical and electronic equipment (EEE) should be collected
separately and not disposed of with regular household waste.
Please dispose this product and all of its parts in a responsible
and environmentally friendly way.
1.11 WatchPAT™200U Device Labels
Located on WatchPAT™200U device
Located on WatchPAT™200U device
1.12 FDA information
The WatchPAT200U is cleared by the FDA under K161579, trade name Watch-PAT
200U (WP200U).

WatchPAT™200U System 9 Operation Manual
2 OVERVIEW
Obstructive sleep apnea syndrome (OSAS) is considered a major public health problem.
The prevalence of the syndrome is estimated at 2% to 5% in the adult population. It is
characterized by recurrent events of complete or partial obstruction of the upper airways
during sleep, often leading to hypoxemia, and/or arousals associated with sympathetic
nervous system activation. The diagnosis and assessment of the sleep apnea patient is based
on the Respiratory Disturbance Index (RDI), the number of Apneas, Hypopneas and
Respiratory Effort Related Arousals (RERA) per hour of sleep, along with sleep
architecture. The common consequences of this sleep disruption are daytime sleepiness,
poor daytime performance and increased vulnerability to accidents. Cardiovascular
complications such as systemic/pulmonary hypertension, ischemic heart disease and
arrhythmias are the major sequel of OSAS in the adult population.
The WP200U is worn on the wrist and is utilizing a plethysmographic based finger–
mounted probe that measures the PAT®(Peripheral Arterial Tone) signal. The PAT®signal
is a measurement of the pulsatile volume changes in the fingertip arteries which reflects the
relative state of the arterial vasomotor activity, and thus indirectly the level of sympathetic
activation. Peripheral arterial vasoconstriction, which mirrors sympathetic activation, is
shown as attenuation in the PAT®signal amplitude.
The same probe measures RED and IR channels used for the measurement of SpO2 signal.
The PAT®and SpO2 signals are recorded continuously and stored on an embedded micro
SD card, together with data from a built-in actigraph (embedded in the WP200U). Snoring
and Body Position signals are generated from the SBP/RESBP integrated sensor (optional).
The RESBP (Respiratory Effort Snoring and Body Position) sensor collect the raw chest
movement signal in addition to the snoring and body position signals that are included with
the SBP sensor.
Following the sleep study, the recordings are automatically downloaded and analyzed in an
offline procedure using the proprietary zzzPAT software.
The zzzPAT algorithms use the four WP200U channels (PAT®, Pulse Rate, Oxygen
saturation and actigraphy) for the detection of sleep related breathing disorders and sleep
staging (Rapid Eye Movement (REM), Light Sleep, Deep Sleep and Wake). The zzzPAT
uses WP200U's snoring and body position channels to generate snoring level and body
position discrete states. The use of SBP/RESBP is optional and according to physician
preference.
The software issues comprehensive reports of the study, with statistics and graphic
presentation of the results. The whole night data can be viewed and the automatically
detected events can be revised manually.

WatchPAT™200U System 10 Operation Manual
2.1 System Description
The WP200U system is comprised of the following items:
WP200U device that includes:
oEmbedded actigraph
oEmbedded pulse oximeter
oEmbedded CPU and electrical circuit card
oEmbedded micro SD card drive
oRechargeable Lithium Ion Battery
oLCD display
uPAT probe (includes oximetry)
uPAT probe connection cable
Wrist Strap
Snore and Body Position sensor (SBP/RESBP) –optional
Cable for Tamper-Proof Bracelet –optional
Tamper-Proof Bracelet - optional
AC adapter
USB cable
Step-by-Step Reference Guide (to be used in conjunction with Section 7)
Quick Reference Cards (to be used in conjunction with Section 8)
Carrying case

WatchPAT™200U System 11 Operation Manual
Figure 1 –Packed Device
Figure 2 –WatchPAT™200U Device with Sensors
An additional item required for the operation of the system is the zzzPAT kit. zzzPAT is a
proprietary PC software for initializing the study, retrieving, analyzing and displaying the
data. For more information, refer to the zzzPAT Operation Manual.
Optional
RESBP sensor
uPAT probe
Optional
SBP sensor

WatchPAT™200U System 12 Operation Manual
2.2 User Interaction with the WatchPAT™ Device Keys
The WatchPAT™ has the following keys (see Figure 3):
Central On/Enter key to power on the WatchPAT™ (the only key
visible to the patient)
Outer ring containing four keys (left, right, up, down) that may be used
by the Operator for entering the diagnostic mode and navigating
through the diagnostic menu. These keys are hidden from the patient.
Figure 3 –The Buttons and Display
LCD Display
The display is used for reading status and error messages. The display is divided
to three sections: Title, Info and Status.
Title (first line): Current operational mode and time
oPATIENT mode while recording night study
oDIAGNOSTIC mode while testing device
oPC HOST while connecting to PC
oCHARGER mode while connecting to AC adapter
Info (2nd-5th line): Specific information depending on
operational mode
Status (last line): Message indicating device status depending
on operational mode
Service Ports and Peripherals
The WatchPAT™ device has 4 ports that are used either for sensor connections
or for servicing and charging (see Figure 4).
ON/ENTER
DOWN
LEFT
LCD
RIGHT
UP

WatchPAT™200U System 13 Operation Manual
The bracelet port is used for connecting the tamper-proof
bracelet.
The uPAT probe port is used for connecting the uPAT probe
A port for connecting the optional Snore & Body Position
sensor
The USB port is used for charging or connecting to the PC
Figure 4 –Service Ports and Peripherals
Figure 5 –WatchPAT™ Wrist Strap
2.3 WatchPAT™ Device Function
The WatchPAT™ records the following channels:
Wrist strap
Bracelet port
uPAT probe port
USB port for charging
and communication
Port for optional Snore
& Body Position
sensor