Snap/Record Button (Show Button)
Press the snap/record button to launch the camera feature to take photos.
Micro-USB Port
Connect to your computer with the included Micro-USB charger to transfer files and charge the
watch.
Included in this package
- One iTouch Playzoom Smartwatch
- One micro-USB cable
- Quick Start Guide
Product Specifications
Display: 1.44inch TFT Capacitive Touch Screen
Supported Languages:English
Photo Resolution: 0.3 Megapixel
Video Resolution: <144p
Video Length Limit Per File: ~3 minute limit per file, but I would advise either two 1 minute videos or
1 two minute video
Storage Capacity: 2 1 minute videos or 50 pictures (confirming if this changed at all)
File Format: AVI; JPG; WAV
Connectivity: N/A - No WiFi, BlueTooth, or Smartphone needed.
Battery: 400 mAh Lithium-Polymer (Ion) Battery
Wearing your iTouch Playzoom
Kids with very sensitive skin may notice some irritation after wearing the iTouch Playzoom
Smartwatch for long periods of time. The skin may become irritated when sweat, moisture, soap, or
other irritants get trapped under the watch band and are left in contact with the skin. To prevent skin
irritation, we suggest keeping your child’s wrists and the band clean and dry. In addition, wearing the
watch too tightly may also be the cause of irritation. Make sure the fit is good- tight enough so the
watch stays in place but not so tight that it’s uncomfortable for your child. If you notice any redness,
swelling, or other irritation, you may want to consult a doctor before wearing the watch again.
Getting Started:
When using your iTouch Playzoom for the first time, you will need to first fully charge the watch. A
full charge will take about 2 hours.
Battery Recharging: Note Adult supervision/operation required.
To charge your iTouch Playzoom, the watch needs to be connected to a computer with the included
Micro-USB Cable. To do so correctly, please follow these steps:
- Pull the rubber cover off of the Micro-USB Port on the left side of the watch.
- Insert the Micro-USB Cable (small end) into the Micro-USB Port on the watch.
- Insert the large end of the Micro-USB into a USB port on your computer. A USB port is
usually marked with this symbol: .