Jabra Handset 450 Installation guide

USER MANUAL
Jabra HANDSET™ 450
for Cisco

1
english
Jabra HaNDSET 450 for CiSCo
CONTENTS
JABRA HANDSET 450 FOR CISCO OVERVIEW.........................2
CONNECTING......................................................................................3
HOW TO USE THE JABRA HANDSET 450 FOR CISCO...........4
TECHNICAL SPECIFICATIONS........................................................6

2
english
Jabra HaNDSET 450 for CiSCo
Jabra Handset 450 for CisCo
oVerVieW
Mute
microphone
Speaker
down
USB port
Speaker
up
LED
Indicator
turning on/off
The Jabra Handset 450 for Cisco will always be powered on when
docked in the handset cradle, and the cradle is plugged into a
USB port.
To turn o the Jabra Handset 450 for Cisco, press and hold (5 secs)
the mute microphone button. Press the mute microphone button
again, to turn back on. The Jabra Handset 450 for Cisco cannot be
turned o if the cradle is plugged into a PC that is turned on.
The Jabra Handset 450 for Cisco will automatically power o when
out of range (20 m or 66 ft) of the handset cradle for 4 minutes or
longer.

3
english
Jabra HaNDSET 450 for CiSCo
ConneCting
The Jabra Handset 450 for Cisco is plug-and-play.
1. Connect the USB cable to the handset cradle, and then plug
the USB cable into any available USB port on your PC.
2. Dock the Jabra Handset 450 for Cisco in the handset cradle.
The handset and the cradle are already paired. To pair a new
handset with the cradle, simply dock the new handset in the
cradle. Only one handset can be paired with the cradle at a time.
CHarging
The Jabra Handset 450 for Cisco will charge when docked in the
handset cradle. The handset cradle must be plugged into a USB
port, and the PC must be turned on. The battery light will change
to ashing yellow when there is less than one hour of battery
remaining
1 hour of charging = 40% charge
3 hours or charging = 100% charge.

4
english
Jabra HaNDSET 450 for CiSCo
HoW to use tHe Jabra Handset 450
for CisCo
Mute
microphone
Speaker down
USB port
Speaker up
LED
Indicator
Answer call Pick up the handset
End call Dock the handset in the cradle
Adjust speaker
volume
Tap the Volume up or
Volume down button
Mute microphone Tap the Mute microphone
button
WHat tHe ligHts mean
What you see What it means
Power on
Power o

5
english
Jabra HaNDSET 450 for CiSCo
The Jabra Handset 450 for Cisco is in pairing
mode
Incoming call
Active call
Voicemail*
The handset is out of range of the handset
cradle
Device rmware update mode
The Jabra Handset 450 for Cisco microphone
is muted
* VXI only. Not for Jabber version 9.5 or earlier.

6
english
Jabra HaNDSET 450 for CiSCo
teCHniCal speCifiCations
Weight:
Cradle: 175 g
Handset: 185 g
Assembled unit: 360 g
Dimensions:
Cradle: L 211 mm x W 57 mm x H 36 mm
Handset: L 203 mm x W 44 mm x H 47 mm
Assembled unit: L 211 mm x W 57 mm x H 60 mm
Microphone:
Omni-directional
Speaker:
Dynamic, 28 mm
Operating range:
Up to 20 m (66 feet)
DECT version:
Dect 6.0 (CAT - iq)
Talk time:
Up to 14 hours
Standby time:
120 hours. If the handset is not docked, it will turn o after 3
minutes.
Charging time:
Less than 3 hours
Operating temperature:
-10°C to 55°C (14° F to 131° F)
Storage temperature:
-40° C to 70° (-40° F to 158° F)

© 2013 GN Netcom A/S. All rights reserved. Jabra®is a registered trademark
of GN Netcom A/S. All other trademarks included herein are the property of
their respective owners.
© 2013 GN Netcom US, Inc. All rights reserved. Jabra®is a registered trademark
of GN Netcom A/S. All other trademarks included herein are the property of
their respective owners..
Made in China
MODEL: WHB004HS & WHB004BS
www.jabra.com