4. Card cleaning cartridge
Remove the card cleaning cartridge
from the card cleaning kit.
Lift the small lid of the cartridge and
remove the white adhesive roller.
Gently peel off the wrapper and
replace back into the cartridge.
Avoid touching the roller surface.
Close cartridge lid and install into
printer - behind the card entry
slot - by gently squeezing the two
clips.
5. Loading ribbon cartridge
Peel off protective wrapper by gently
pulling on the tape.
Insert the ribbon cartridge so the
gears on the ends of the rollers fit
into the appropriate slots.
Close the printer lid and push down
until you hear an audible click.
Card will exit from slot after printing.
Setup
1. Unpack your JAVELIN card printer
Make sure the following items are included:
- Power & USB cables - Power transformer
- Ribbon cartridge - Driver and documentation CD
- Quick Start guide - Card Cleaning kit
(this document) - Printer Cleaning kit
If any items are missing, please contact your dealer.
2. Open lid
Open printer lid by pressing the
cover release button on the
top of your printer.
3. Black printer roller
Ensure printer is turned off.
Remove the small black printer
roller from the card cleaning kit
and place it between the blue clips
behind the card entry slot.
While pressing the roller down,
turn power on. You will hear a loud
click as the roller is secured.
At this point, let go of the roller and
turn power off.
R
