jbc HT420 User manual

HT420
THERMAL TWEEZERS
www.jbctools.com

2
HT420 / THERMAL TWEEZERS
HT420-A
Thermal tweezersCartridge C420
DD-2B/DD-1B/DD-9B
CONTROL UNIT
HT-SB
STAND
Connectable control units: DI, DD, DM and RM.
HT420-A
THERMAL TWEEZERS
MANUAL
Power cord socket
Equipotential connection
HT420
THERMAL TWEEZERS
ww w.jb cto ols. com

3
CHANGING THE CARTRIDGE
RANGE OF CARTRIDGES
WARNING: It is esential to tighten this screw for
the tool to function.
Cartridge electric
connection screw
Alignment
Important: It is esential to insert the cartridge
till the end for a good connection.
Take the mark as reference and check that
both tips of the tweezer coincide.
Consult our wide range of cartridges with more than 250 references in www.jbctools.com.
For special cartridges contact with our distributor.
A
A
A
A
C420-281 C420-282 ø 3,5mm max.
C420-271 A=1,5mm
C420-272 A=2,6mm
C420-273 A=4mm
C420-274 A=6mm
C420-275 A=8mm
C420-276 A=10mm
C420-277 A=15mm
C420-278 A=20mm
C420-285 A=22mm
C420-279 A=8mm
C420-280 A=11mm
C420-283 A=50mm
C420-281 C420-282
Chip Components
Dual in line
QFP y PLCCBlade Type
Cable stripper

WARRANTY
JBC’s 2 years warranty guarantees this equipment against all manu-
facturing defects, covering the replacement of defective parts and
all necessary labour.
Warranty does not cover product wear due to use or mis-use.
In order for the warranty to be valid, equipment must be returned,
postage paid, to the dealer where it was purchased enclosing this
fully filled in, sheet.
www.jbctools.com
SERIAL Nº
STAMP OF DEALER
DATE OF PURCHASE
0008868/1112
This product should not be
thrown in the garbage.