jbc TEH User manual

TEH
Heating Element for TET
INSTRUCTION MANUAL

Changing TET Heater Hose Set
TC
Suction
OK
TC
Suction
OK
Only perform this operation when the
station is turned off.
Use a spanner to unscrew the nut (1) and
remove the tool hose (2).
Insert the new hose, make sure
it is pushed all the way into
the connector (2), and
tighten the nut (1).
1
2
Manual ......................... 1 unit
Ref. 0029030
Heating Element
for TET .......................... 1 unit
(for 100V / 120V / 230V)
Packing List
The following items are included:
This manual corresponds to the following reference:
0012374
2
40 mm
50 mm
60 mm
80 mm
100 mm
130 mm 130 mm
para manuales - color gris
200 mm
300 mm

Replacing the Heating Element
Note: Only perform this operation when the heating element is cold
and the unit is disconnected from the mains.
Loosen the screw (1) and pull the worn heating element out of the
handle (2).
Insert the new heating element, make sure its pushed all the way in
(2) and tighten the screw (1).
TC
Suction
OK
TC
Suction
OK
TE Handle*
Ref. TE-B
(for 100V / 120V / 230V)
Heating Element for TET
Ref. 0012374
(for 100V / 120V / 230V)
TET Precision
Heater Hose Set*
Ref. TE-TB
(for 100V / 120V / 230V)
2
1
TE Nozzle*
* not included, sold separately
Features
TEH Heating Element is designed to be used with TE Handle. Both,
as a set, work with JTU Control Unit and TE Nozzles.
3
40 mm
50 mm
60 mm
80 mm
100 mm
130 mm 130 mm
para manuales - color gris
200 mm
300 mm

This product should not be thrown in the garbage.
In accordance with the European directive 2012/19/EU, electronic
equipment at the end of its life must be collected and returned to an
authorized recycling facility.
Warranty
JBC’s 2 year warranty covers this equipment against all manufacturing defects,
including the replacement of defective parts and labour.
Warranty does not cover product wear or misuse.
In order for the warranty to be valid, equipment must be returned, postage paid, to
the dealer where it was purchased.
40 mm
50 mm
60 mm
80 mm
100 mm
130 mm 130 mm
para manuales - color gris
200 mm
300 mm
0029030-0422
TEH
Heating Element for TET
Ref.: 0012374
- Total Net Weight: 28 g / 0.062 lb
- Package Dimensions/Weight: 236 x 41 x 41 mm / 40 g
(L x W x H) 9.29 x 1.61 x 1.61 in / 0.088 lb
Complies with CE standards.
ESD safe.
Specifications