Jetson Pinky User manual

USER MANUAL
MODEL #: JPNKY | VERSION #: 032017
PINKY
Three-in-One Scooter

Model #: JPNKY | Version #: 032017
1
Congratulations on your new Jetson 3-in-1 Pinky Scooter! Please
note, this is not an electric device. Before your rst ride, please
check whether the wheels are damaged, or parts are loose. If there
are any abnormalities, please contact Jetson Customer Support at
1-[phone], or email customerser[email protected].
This product manual can help you understand, assemble, use, and maintain
your Jetson Pinky. In order to avoid danger caused by collisions, falls, and
loss of control, please use caution and learn how to ride the Jetson Pinky
safely. Jetson and authorized dealers cannot be held liable for injury or
damage caused from riding the Jetson Pinky. Falling, losing control, and colli-
sions (including failure to obey the Jetson Pinky manual) may cause injury. In
order to minimize the risk, ensure you read the Jetson Pinky manual careful-
ly. Users ride at their own risk.
The user is responsible for consequences caused by violating warnings or
improper operations.
If for any reason you want to return this product, please call us at 1-(888)
976-9904 or email us at [e-mail] before returning
it to the store.
WHAT’S IN THE BOX:
• 1 x Pinky Scooter
• 1 x Seat Housing (Seat
and Front Covering)
• 1 x Removable Drawer
• 1 x Sliding Sleeve
• 3 x Allen Wrench

2
Model #: JPNKY | Version #: 032017
FOR YOUR SAFETY:
• This product is suitable for children age 2-6+, and for use on private
property and closed courses. Always ride defensively, and watch out for
potential obstacles that may catch your wheel or cause you to swerve sud-
denly.
• The Jetson Pinky should always be used under supervision.
• Always check any local laws or regulations which may a󰀨ect where the
Jetson Pinky may be used.
• Ride at your own risk and use common sense. Any rider that is unable to t
comfortably on the product should not attempt to ride it. All decisions on who
is allowed to ride the Jetson Pinky should be made based on their maturity,
skill, and ability to follow the rules.
• The Jetson Pinky is designed for one rider. Never carry passengers, and do
not attach the Jetson Pinky to other objects.
• This product was manufactured for performance and durability, but is not
impervious to damage. Jumping and aggressive riding should be avoided
under all circumstances. The rider assumes all responsibility and risk associ-
ated with high-stress activity.
• Keep your ngers and other body parts away from all other moving compo-
nents when operating the Jetson Pinky. Keep your hands on the handlebars
at all times.
• Do not wear headphones or use a cell phone while operating the Jetson
Pinky.
• Do not operate the Jetson Pinky in wet or icy weather, and never immerse
the product in water.
• Avoid excessive speeds when riding downhill, as it increases the risk of
accident and injury. Avoid wet, slick, bumpy, uneven or rough surfaces while
using the Jetson Pinky. Never risk damaging surfaces such as carpet and
ooring by using the product indoors.
• Do not ride at night, or when visibility is limited.
• Always wear proper protective equipment, such as a helmet, elbow pads,
and knee pads. Athletic shoes with rubber soles are best for riding the Jet-
son Pinky.
• Never operate the product barefooted or in sandals, and keep shoelaces
tied and away from the wheels.
• The brake may become hot while operating, do not touch the brake with
your bare skin.
• Make sure all screws are tightened, and all clamps and locks are properly
secured before riding.

Model #: JPNKY | Version #: 032017
3
OVERVIEW:
UNFOLDING THE PINKY:
To unfold your Pinky,
insert the long Allen
Wrench into the hole of
the Steering Rod and pull
up (Figure A).
NOTE: Images of the product in this instruction manual may differ slightly from the product itself.
While pulling up with the
Allen Wrench, lift the
Handlebar away from the
Deck (Figure B).
The unfolding process
is complete when the
Steering Rod is upright
and locked in place
(Figure C).

Model #: JPNKY | Version #: 032017 4
To fold your Pinky for
storage, insert the long
Allen Wrench into the
Steering Rod and pull
up (Figure D).
SEAT AND DRAWER INSTALLATION:
To install the seat
and drawer, rst
slide the Seat
Housing onto the
Steering Rod.
EASY FOLDING COVER INSTALLATION:
The Easy Folding Cover is a very useful attachment that allows you to easily fold and
unfold your Pinky once you no longer use the Seat Housing and Drawer. Please note
that you will not be able to install or use the Seat and Drawer while the Easy Folding
Cover is installed. To install the Sliding Sleeve, you must rst remove the Collar Clamp
which has two screws and the T-Bar.
Slide the Front
Covering around
the Steering Rod
until the screw
holes align with
the Seat Housing.
Use the Allen
Wrench to secure
the screw rmly into
the nut by turning
clockwise through
the Front Covering
and Seat Housing.
Once the Seat
Housing is secured
to the Pinky, slide
the Drawer into the
Seat Housing.
FOLDING THE PINKY:
While pulling up with
the Allen Wrench,
lower the Handlebar
towards the Deck
(Figure E).
The folding process is
complete when the Steer-
ing Rod is at against
the Deck and locked in
place(Figure F).

Model #: JPNKY | Version #: 032017
5
Open the lever on the Col-
lar Clamp and use the Allen
Wrench counter-clockwise
to loosen the screw that is
screwed into the steering
rod (Figure A).
Remove the Collar Clamp
from the Steering Rod by
lifting up (Figure D).
To unfold the Pinky using the Easy Folding Cover, slide the Easy Folding Cover up the
Steering Rod and raise the Handlebar until it locks into place. To fold the Pinky up for
storage, slide the Easy Folding Cover up the Steering Rod and lower the Handlebar
towards the Deck.
Then, loosen the
second screw on
the Collar Clamp
(Figure B).
Press the Height
Adjustment Button
on the Steering Rod
and pull the T-Bar
out (Figure C).
Before installing the Easy
Folding Cover, your Pinky
should look like Figure E.
Put the Easy Folding Cover
on the Steering Rod, and line
up the screw holes featured
in Figure E.
Tighten the screws us-
ing two Allen Wrenches
(Figure F). Reinstall the
Collar Clamp and T-Bar
before attempting to
use the Pinky.

6
Model #: JPNKY | Version #: 032017
MAINTENANCE:
To change the Deck, loosen the six screws
(labeled “A”) from the bottom of the deck. Re-
move the deck, and replace with a new deck.
Tighten all six screws back in place before at-
tempting to ride. Once you have replaced the
deck, check the screws after riding to ensure
that they remain tight.
To change the Brakes, loosen the six screws
(labeled “A”) from the bottom of the deck.
Then, remove the deck and loosen the two
brake screws (labeled “B”). Replace the brake
and tighten the brake screws, then reattach
the deck and tighten all six deck screws.
To change the Steering Spring, loosen the
four screws (labeled “C”) from under the front
wheels. Then, remove the mudguard and
loosen the two spring screws (labeled “D”).
Pull the spring upwards to remove it. Once
the new spring is inserted, screw in the spring
screws, reattach the mudguard, and tighten
the four screws under the front wheels.
To change the Collar Clamp, loosen the
two screws (labeled “E” and “F”) on either
side of the Collar Clamp. Then, lift the Collar
Clamp upwards to remove it. Once the new
Collar Clamp has been added, tighten the two
screws on either side of it.
To change the Sliding Sleeve, rst remove
the Collar Clamp (as described above). Then,
loosen the two screws (labeled “G”) on either
side of the Sliding Sleeve. Then, lift the Collar
Clamp upwards to remove it. Once the new
Collar Clamp has been added, tighten the two
screws on either side of it.

PRODUCT REGISTRATION
Please complete and mail this card within 10 days of purchase.
Name: _____________________________________________________________________
Age: _______________________________________________________________________
Address: ___________________________________________________________________
City, State, Zip: _____________________________________________________________
Email: _____________________________________________________________________
Home Phone: __________________ Work Phone: ________________________________
Purchase Date: ___________ Purchased from: _________________________________
Serial Number: _____________________________________________________________
Product: ___________________________________________________________________
Gender: _______________ Occupation: ________________________________________
Is this your rst Jetson product? _____________________________________________
Other similar product owned before: _________________________________________
How did you hear about the Jetson® Pinky?
____________________________________________________________________________
____________________________________________________________________________
Complete this form and mail it to:
Attention: Product Registration
Jetson Electric Bikes
1 Rewe Street
Brooklyn, NY 11211

WWW.JETSONBIKE.COM
• ELECTRIC MOPED
• ELECTRIC SKATEBOARD
...AND MORE!
• ELECTRIC BICYCLE
• FOLDING ELECTRIC SCOOTER
IF YOU LIKE THIS PRODUCT, PLEASE CHECK OUT THE
OTHER PRODUCTS ON OUR WEBSITE, INCLUDING OUR:
A LEADER
IN ELECTRIC TRANSPORTATION
888-976-9904
[e-mail]