Jetter JVM-104-O09 User manual

User Manual
JVM-104-O09
HMI
60884730_01
We automate your success.

This document has been compiled by Jetter AG with due diligence based on the state of the art as
known to them. Any revisions and technical advancements of our products are not automatically made
available in a revised document. Jetter AG shall not be liable for any errors either in form or content, or
for any missing updates, as well as for any damage or detriment resulting from such failure.
Jetter AG
Graeterstrasse 2
71642 Ludwigsburg
Germany
Phone
Switchboard [phone]
Sales [phone]
Technical hotline [phone]
E-mail
Technical hotline [email protected]
Sales [email protected]
www.jetter.de
Translation of the german original User Manual
Revision 4.12.1
Date of issue 4/3/2023

Jetter AG Table of contents
User Manual – JVM-104-O09 iii
Table of contents
1 Introduction ....................................................................................................................................... 6
1.1 Information on this document .................................................................................................. 6
1.2 Typographical conventions...................................................................................................... 6
2 Safety................................................................................................................................................ 7
2.1 General Information................................................................................................................. 7
2.2 Purpose ................................................................................................................................... 7
2.2.1 Intended use................................................................................................................ 7
2.2.2 Usage other than intended .......................................................................................... 7
2.3 Warnings used in this document.............................................................................................. 8
3 Product description ........................................................................................................................... 9
3.1 Design...................................................................................................................................... 9
3.2 Product features ...................................................................................................................... 9
3.3 Nameplate ............................................................................................................................... 10
3.4 Scope of delivery ..................................................................................................................... 10
4 Technical data................................................................................................................................... 11
4.1 Dimensions .............................................................................................................................. 11
4.2 Mechanical specifications........................................................................................................ 11
4.3 Electrical properties ................................................................................................................. 12
4.3.1 Ports and interfaces..................................................................................................... 12
4.3.2 Multi-purpose inputs/outputs ....................................................................................... 13
4.4 Environmental conditions......................................................................................................... 16
4.5 Display ..................................................................................................................................... 16
4.6 Acoustic signal generator ........................................................................................................ 16
4.7 EMI values............................................................................................................................... 17
5 Mechanical installation...................................................................................................................... 18
5.1 Requirements for the installation location................................................................................ 18
5.2 Preparing for installation.......................................................................................................... 19
5.3 Installing the HMI..................................................................................................................... 20
5.4 Mounting the HMI combined with JXM-HMI ............................................................................ 22
6 Electrical connection ......................................................................................................................... 24
6.1 Pin assignment ........................................................................................................................ 25
6.1.1 Deutsch connector – voltage supply, multi-purpose inputs/outputs, CAN, ignition...... 25
6.2 Wiring - Example ..................................................................................................................... 27

Jetter AG Table of contents
User Manual – JVM-104-O09 iv
7 Identification and Configuration ........................................................................................................ 28
7.1 Operating system..................................................................................................................... 28
7.1.1 Operating system update of the HMI........................................................................... 28
7.2 File system............................................................................................................................... 31
7.2.1 Features ...................................................................................................................... 32
8 Programming .................................................................................................................................... 33
8.1 Abbreviations, module register properties and formats ........................................................... 33
8.2 CANopen STX API .................................................................................................................. 34
8.2.1 STX Functions ............................................................................................................. 34
8.2.2 CANopen object directory............................................................................................ 35
8.3 Storage options - Overview ..................................................................................................... 36
8.3.1 Operating system memory .......................................................................................... 36
8.3.2 File system memory .................................................................................................... 36
8.3.3 Application program memory....................................................................................... 37
8.3.4 Flag.............................................................................................................................. 37
8.3.5 Storing registers and variables .................................................................................... 38
8.4 Control elements...................................................................................................................... 39
8.4.1 Input keys .................................................................................................................... 39
8.4.2 Digipot ......................................................................................................................... 40
8.5 Ignition and OFF delay ............................................................................................................ 41
8.6 Multi-purpose inputs ................................................................................................................ 43
8.6.1 Status and instructions ................................................................................................ 44
8.6.2 Analog functions .......................................................................................................... 45
8.6.3 Digital functions ........................................................................................................... 46
8.7 Multi-purpose outputs .............................................................................................................. 47
8.7.1 Status and instructions ................................................................................................ 48
8.7.2 Analog functions .......................................................................................................... 49
8.7.3 Digital functions ........................................................................................................... 50
8.7.4 Multi-purpose outputs PA3 and PA4 functioning as H-bridges.................................... 52
8.8 Runtime registers..................................................................................................................... 53
8.9 Saving and loading an application program ............................................................................ 55
9 Registers - Overview......................................................................................................................... 56
10 Register overview - Multi-purpose inputs and outputs ...................................................................... 64

Jetter AG Table of contents
User Manual – JVM-104-O09 v
11 Maintenance ..................................................................................................................................... 67
11.1 Repairs .................................................................................................................................... 67
11.2 Return and disposal................................................................................................................. 67
11.3 Storage and shipment.............................................................................................................. 68
12 Service .............................................................................................................................................. 69
12.1 Customer service..................................................................................................................... 69
13 Spare parts and accessories ............................................................................................................ 70
13.1 Accessories ............................................................................................................................. 70

Jetter AG Introduction | 1
User Manual – JVM-104-O09 6
1 Introduction
1.1 Information on this document
This document forms an integral part of the product and must be read and under-
stood prior to using it. It contains important and safety-related information for the
proper use of the product as intended.
Target groups This document is intended for specialists with appropriate qualifications.
Only competent and trained personnel is allowed to put this device into operation.
During the whole product life cycle, safe handling and operation of the device
must be ensured. In the case of missing or inadequate technical knowledge or
knowledge of this document any liability is excluded.
Availability of
information Make sure this document is kept at the ready in the vicinity of the product
throughout its service life.
For information on new revisions of this document, visit the download area on our
website. This document is not subject to any updating service.
Start | Jetter - We automate your success.
For further information refer to the following information products:
■JetSym software Online Help
Detailed description of software functions with application examples
■Application-oriented manuals
Cross-product documentation
■Version updates
Information about new versions of software products or of the operating sys-
tem of your device
1.2 Typographical conventions
This manual uses different typographical effects to support you in finding and
classifying information. Below, there is an example of a step-by-step instruction:
üThis symbol indicates requirements which have to be met before executing
the following action.
►This sign or a numbering at the beginning of a paragraph marks an action in-
struction that must be executed by the user. Execute the instructions one af-
ter the other.
ðThe target after a list of instructions indicates reactions to, or results of these
actions.
INFO Further information and practical tips
In the info box you will find helpful information and practical
tips about your product.

Jetter AG Safety | 2
User Manual – JVM-104-O09 7
2 Safety
2.1 General Information
When placed on the market, this product corresponds to the current state of sci-
ence and technology.
In addition to the operating instructions, the laws, regulations and guidelines of
the country of operation or the EU apply to the operation of the product. The op-
erator is responsible for compliance with the relevant accident prevention regula-
tions and generally accepted safety rules.
RoHS 2 The device conforms to the EU directive 2011/65/EU (RoHS 2).
2.2 Purpose
2.2.1 Intended use
The JVM-104-O09 is intended for installation in commercial vehicles and self-pro-
pelled machines. It is an HMI with integrated controller for exchange of data with
peripheral devices.
Operate the device only in accordance with the intended conditions of use, and
within the limits set forth in the technical specifications.
Intended use of the product includes its operation in accordance with this man-
ual.
SELV/PELV If this device is not used in a vehicle or mobile machine, a SELV or PELV power
supply unit must be used to supply the device.
2.2.2 Usage other than intended
This device must not be used in technical systems which to a high degree have
to be fail-safe.
Machinery Directive This device is no safety-related part as per Machinery Directive 2006/42/EC, and
must, therefore, not be used for safety-relevant applications. This device is NOT
intended for the purpose of personal safety, and must, therefore, not be used to
protect persons.

Jetter AG Safety | 2
User Manual – JVM-104-O09 8
2.3 Warnings used in this document
DANGER
High risk
Indicates an imminently hazardous situation which, if not
avoided, will result in death or serious injury.
WARNING
Medium risk
Indicates a potentially hazardous situation which, if not
avoided, could result in death or serious injury.
CAUTION
Low risk
Indicates a hazardous situation which, if not avoided, could
result in minor or moderate injury.
NOTICE
Material damage
Indicates a situation which, if not avoided, could result in mal-
functions or material damage.

Jetter AG Product description | 3
User Manual – JVM-104-O09 9
3 Product description
The JVM-104-O09 is a graphical HMI. Thanks to its compact design and in-
tegrated controller, the HMI is versatile and has been specially developed
for harsh applications in commercial vehicles and self-propelled machines.
3.1 Design
113
12
93
48
10 2
67 5
11
11 11
11
Fig.1: Design
1 TFT display
2 F3 key
3 F4 key
4 Home key
5 ESC key
6 Digipot
7 Scroll key
8 Power key
9 F1 key
10 F2 key
11 Screw hole
12 Deutsch connector
13 Nameplate
3.2 Product features
■Display: 3.5” TFT, 320x240px
■CPU: ARM11, 500MHz, 128MB RAM, 512MB Flash
■Surface mount model with connector Deutsch DT06-12S
■Input: 8 keys, 1 DigiPot
■Ports and interfaces: 1x CAN
■2 multi-purpose inputs, configurable:
Digital input, voltage and current measurement, frequency measure-
ment, counter function

Jetter AG Product description | 3
User Manual – JVM-104-O09 10
■4 multi-purpose inputs/outputs, configurable:
Digital active-low input, digital output up to 2.5A, PWM output,
H-bridge
■Front/rear degree of protection: IP65/IP65
3.3 Nameplate
2
3
4
1
5
Fig.2: Nameplate
1 Logo
2 Serial number
3 Barcode
4 Article number and hardware revision
5 Model code number
3.4 Scope of delivery
Scope of delivery Item number Quantity
JVM-104-O09 10001559 1

Jetter AG Technical data | 4
User Manual – JVM-104-O09 11
4 Technical data
This chapter contains electrical, mechanical data and operating data of the
JVM-104-O09.
4.1 Dimensions
119.8
27.955
83
O3.1
4 x
67.3
17.6 28.4
104.9
Fig.3: Dimensions in mm
4.2 Mechanical specifications
Parameter Description Standards
Weight 300g
Vibration
Broadband noise 10Hz / 0.005(m/s2)2/Hz DINEN60068-2-64
200Hz / 0.02(m/s2)2/Hz
300Hz / 0.01(m/s2)2/Hz
350Hz / 0.002(m/s2)2/
Hz
Duration 3x 24h
Shock resistance
Type of shock Half-sine wave DINEN60068-2-27
Intensity and duration 30g (300m/s2) for
18ms
Number and direction 18shocks in all 6direc-
tions
Degree of protection
Front panel IP65 DINEN60529
Rear panel IP65
Tab.1: Mechanical specifications

Jetter AG Technical data | 4
User Manual – JVM-104-O09 12
4.3 Electrical properties
Power supply
VBAT_ECU Parameter Description
Nominal voltage DC12V or 24V
Maximum current 2A
Typical logic current con-
sumption (VBAT_ECU)
170mA at DC12V
90mA at DC24V
Power consumption Approx 2W
Integrated protective
functions
Reverse polarity protection, overvoltage, short volt-
age pulses
Permissible voltage
range VBAT_ECU
DC8V...32V
Permissible voltage
range at terminal 31 (ig-
nition)
DC8V...32V
Tab.2: Power supply VBAT_ECU
4.3.1 Ports and interfaces
CAN interface Parameter Description
Baud rate 250kBaud…1MBaud
Protocol CANopen
Default node ID on the
CANopen bus
127(0x7F)
Terminating resistance Does not exist.
Must be connected externally.
Cable specification Twisted pair conductors, unshielded
Tab.3: CAN interface specification
CAN bus cable Parameter Description
Wire cross-section 500kBaud: 0.34mm²…0.50mm2
250kBaud: 0.34mm²…0.60mm2
Cable capacitance 60pF/m max.
Resistivity 500kBaud: Max. 60Ω/km
250kBaud: Max. 60Ω/km
Number of cores 2
Twisting CAN_L and CAN_H cables are twisted pairwise
Tab.4: Specification - CAN bus cable

Jetter AG Technical data | 4
User Manual – JVM-104-O09 13
The maximum permitted cable length depends on the baud rate being used and
the number of CANopen devices being connected.
Baud rate Max. cable length Max. stub length Total cable length
500kBaud 100m 5m 30m
250kBaud 250m 10m 60m
Tab.5: Cable lengths
4.3.2 Multi-purpose inputs/outputs
Power supply
VBAT_PA Parameter Description
Nominal voltage DC12V or DC24V
Permissible voltage
range VBAT_PA
DC8V...DC32V
Maximum current 10A
Integrated protective
functions
Protection against polarity reversal
Tab.6: Technical data - Power supply VBAT_PA
MFQE digital inputs Parameter Description
Type of inputs Active-high input
Operating point ON 2.0V min.
Operating point OFF 1.0V max.
Input resistance 50kΩ
Maximum input fre-
quency
1Hz
Electrical isolation None
Tab.7: Technical Data – Digital Inputs MFQE
Voltage measuring Parameter Description
Measuring range DC0V...DC15V
Input resistance 50kΩ
Resolution 12 bits
Electrical isolation None
Tab.8: Technical data - Voltage measurement
Current measurement Parameter Description
Measuring range DC0mA...DC20mA
Measuring shunt 120Ω
Resolution 12 bits
Overcurrent trip Yes
Electrical isolation None
Tab.9: Technical data - Current measurement

Jetter AG Technical data | 4
User Manual – JVM-104-O09 14
Frequency measuring Parameter Description
Measuring range 0.1Hz...10kHz
Accuracy 99.9%
Input resistance 20kΩ
Typical input current Max. 1mA
Maximum input fre-
quency
Max. 10kHz
Period measurement
resolution
1μs
Adjustable gate times for
gate time measuring
1ms...10s
Duty cycle frequency in-
put
35μs min.
Operating point ON 4.7V min.
Operating point OFF Max. 2.5V
Tab.10: Technical data - Frequency measurement
Counting function Parameter Description
Measuring range 0.1Hz...10kHz
Resolution 0.1%
Counting range 32 bits
Operating point ON 4.7V min.
Operating point OFF Max. 2.5V
Tab.11: Technical data - Counting function
Digital input PAx Parameter Description
Type of input Active-high input
Nominal voltage VBAT_PA – 10%
Operating point ON Minimum DC 4.0V
Operating point OFF Maximum DC 1.6V
Internal pull-up resistor NAMUR: 1kΩ, 8.2V
Electrical isolation None
Tab.12: Technical data – Digital input PAx

Jetter AG Technical data | 4
User Manual – JVM-104-O09 15
Digital output Parameter Description
Maximum output current
per channel
2.5A
Nominal voltage Supply voltage VBAT_PA
Diagnostics Overcurrent, short circuit, cable break
Overcurrent evaluation Adjustable current trip
Maximum latency:
Switching between out-
put and input
500ms
Maximum total current The total current of all outputs must not exceed 8A,
otherwise shutdown after 500ms.
If the total current exceeds 10.5A, the outputs shut
off immediately.
Tab.13: Technical data – Digital output
PWM output Parameter Description
PWM frequency 100Hz...1kHz
Resolution of duty cycle 0.1%
Accuracy of pulse con-
trol factor (duty cycle)
±42ns
Maximum rated current Supply voltage VBAT_PA
Switching frequency 100Hz...1kHz
Protective circuitry Overvoltage, overcurrent
Diagnostics Overcurrent, cable break
Maximum total current The total current of all outputs must not exceed 8A,
otherwise shutdown after 500ms.
If the total current exceeds 10.5A, the outputs shut
off immediately.
Tab.14: Technical data – PWM output
H-bridge Parameter Description
Maximum rated current Supply voltage VBAT
Maximum output current 2.5A
Peak current ~5A, max. 500ms
Current measuring accu-
racy
±20%
Switching frequency (1/
period length)
100Hz...1kHz
Frequency accuracy ±42ns
Resolution of duty cycle 0.1%
Diagnostics Overcurrent
Tab.15: Technical data – H-bridge

Jetter AG Technical data | 4
User Manual – JVM-104-O09 16
4.4 Environmental conditions
Parameter Description Standards
Operating temperature -20°C...+65°C ISO16750-4
Climatic conditions Humid heat
Storage temperature -20°C...+70°C ISO16750-4
DINEN60068-2-1
DINEN60068-2-2
Relative humidity 10% … 95% DINEN61131-2
Pollution degree 2 DINEN61131-2
Tab.16: Environmental conditions
4.5 Display
Parameter Description
Type TFT LCD flat screen monitor
Resolution 320 x 240Pixel
Size 3.5"
Backlighting LED, typ. 350cd/m2 , dimmable
Horizontal viewing angle 70° to each side
Vertical viewing angle 50° from above, 70° from below
Tab.17: Technical data – display
4.6 Acoustic signal generator
Parameter Description
Type Loudspeaker Adjustable frequency
and volume.
Volume 83dB 10cm distance and res-
onance frequency
2,670Hz
Tab.18: Acoustic signal generator

Jetter AG Technical data | 4
User Manual – JVM-104-O09 17
4.7 EMI values
The JVM-104-O09 has E1 approval according to ECE R10 Rev. 5 and CE con-
formity according to ISO 14982.
Pulses ISO7637-2 Test pulse Values Function class
1 -450V C
2a +37V A
2b +20V C
3a -150V A
3b +150V A
4 Ua1: -12V / 50ms
Ua2: -5V / 500ms
A (24V systems)
Ua1: -6V / 15ms
Ua2: -2.5V / 1,000ms
C (12V systems)
Tab.19: Pulses ISO7637-2
Irradiation ISO11452 Parameter Values Function class
Irradiation 20MHz ... 2GHz 30V/m A
Tab.20: Irradiation ISO11452
ESDEN61000-4-2 Parameter Values Function class
Contact discharge ±4 kV (to conductive
surfaces)
A
Discharge through air ±8 kV (to insulating
surfaces)
A
Tab.21: ESDEN61000-4-2

Jetter AG Mechanical installation | 5
User Manual – JVM-104-O09 18
5 Mechanical installation
NOTICE
Damages to material or functional impairment due to
welding
Welding on the chassis may damage the device material, or
impair device functions.
►Before you start welding, disconnect all connections be-
tween the device and the electric system of the vehicle.
►Protect the device from flying sparks and welding beads
(splatter).
►Do not touch the device with the welding electrode or
earth clamp.
NOTICE
Dirt and moisture can affect the electrical connections
►Protect unused pins using blanking plugs.
►Protect all electrical connections with appropriate single
wire seals.
►Clean the area around a connector prior to removing the
mating connector.
5.1 Requirements for the installation location
The installation location must meet the following requirements:
■The installation location must allow air to circulate.
■The installation location must be of sufficient size.
■The device must be easily accessible to allow for service work.
Space required for
installation and
service
It should be possible to disconnect the connectors at any time.
70
Fig.4: Space requirements for installation work (in mm)

Jetter AG Mechanical installation | 5
User Manual – JVM-104-O09 19
Avoiding unsuitable
installation locations The following installation locations are unsuitable for mounting the device:
Unsuitable installation location Reason
Outdoor installation The device must not be exposed to
rain or a jet of water. Do not use a
steam jet or other such devices to
clean the device.
Installation location close to heat-sen-
sitive materials
The materials could become warped
or misshapen as a result of heat pro-
duced by the device.
Tab.22: Unsuitable installation locations
5.2 Preparing for installation
Mounting
accessories Use the following accessories for installation:
Accessories Item number
Mounting plate for RAM Mount ball
consisting of mounting plate and screws for housing with
Deutsch or M12 connector, without RAM Mount attach-
ments
10001621
OR
Mounting plate for RAM mount arm with suction cup
consisting of mounting plate and screws for housings with
Deutsch/M12 connector including RAM Mount arm with
suction cup
10001551
Screw holes
27.955
83
O3.1
4 x
Fig.5: Screw holes, dimensions in mm

Jetter AG Mechanical installation | 5
User Manual – JVM-104-O09 20
5.3 Installing the HMI
The illustration below shows how to install the device:
234
5
1
6
Fig.6: Installation drawing
1 2 x self-locking nuts
2 4 x screw for fixing to the JVM-104-O09
3 RAM Mount ball
4 Mounting plate with opening for connector
5 2 x countersunk screws for mounting a RAM Mount ball
6 Alternate position of the RAM Mount ball
1. Screw the desired RAM Mount attachments onto the mounting plate.
2. Hold the JVM-104-O09 against the mounting plate from behind. The connec-
tors must be accessible through the openings in the mounting plate.
3. Screw the mounting plate onto the JVM-104-O09.