JHCTech SIGM-2650 User manual

用户手册
User’s Manual
SIGM-2650
Ver.: A0.1
Date：2020-06-24

User’s Manual
Version Note
No.
Ver.
Note
Date
Writer
1
A0.1
first publish
20200624
Echo Guo

User’s Manual
I
Copyright
The documentation and the software included with this product are copy- righted 2020 by Shenzhen JHC
Technology Development Co.,Ltd. All rights are reserved. Shenzhen JHC Technology Development
Co.,Ltd. reserves the right to make improvements in the products described in this manual at any time
without notice. No part of this manual may be reproduced, copied, translated or transmitted in any form or
by any means without the prior written permission of Shenzhen JHC Technology Development Co., Ltd .
Information provided in this manual is intended to be accurate and reliable. However,
Shenzhen JHC Technology Development Co., Ltd . assumes no responsibility for its use, nor for any
infringements of the rights of third parties, which may result from its use.

User’s Manual
II
Product Warranty (2 years)
JHC warrants to you, the original purchaser, that each of its products will be free from defects in materials
and workmanship for 2 years from the date of purchase.
This warranty does not apply to any products which have been repaired or altered by persons other than
repair personnel authorized by JHC, or which have been subject to misuse, abuse, accident or improper
installation.
JHC assumes no liability under the terms of this warranty as a consequence of such events.
Because of JHC.s high quality-control standards and rigorous testing, most of our customers never need to
use our repair service. If a JHC product is defective, it will be repaired or replaced at no charge during the
warranty period. For out-of-warranty repairs, you will be billed according to the cost of replacement
materials, service time and freight. Please consult your dealer for more details.
If you think you have a defective product, follow these steps:
1. Collect all the information about the problem encountered. (For example, CPU speed, JHC products
used, other hardware and software used, etc.) Note anything abnormal and list any onscreen messages
you get when the problem occurs.
2. Call your dealer and describe the problem. Please have your manual, product, and any helpful
information readily available.
3. If your product is diagnosed as defective, obtain an RMA (return merchandise authorization) number
from your dealer. This allows us to process your return more quickly.
4. Carefully pack the defective product, a fully-completed Repair and Replacement Order Card and a
photocopy proof of purchase date (such as your sales receipt) in a shippable container. A product
returned without proof of the purchase date is not eligible for warranty service.
5. Write the RMA number visibly on the outside of the package and ship it prepaid to your dealer.

User’s Manual
III
Declaration of Conformity
CE
This product has passed the CE test for environmental specifications
when shielded cables are used for external wiring. We recommend the use
of shielded cables. This kind of cable is available from JHC. Please
contact your local supplier for ordering information. Test conditions for
passing included the equipment being operated within an industrial enclosure.
In order to protect the product from being damaged by ESD (Electrostatic
Discharge) and EMI leakage, we strongly recommend the use of
CE-compliant industrial enclosure products.
FCC Class B
Note: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference when the equipment is operated in a commercial environment This equipment
generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with
the instruction manual, may cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference in which case the user will be required
to correct the interference at his own expense.
Technical Support and Assistance
Step 1. Visit the JHC web site at www.jhctech.com.cn where you can find the latest information about the
product.
Step 2. Contact your distributor, sales representative, or JHC’s customer service center for technical
support if you need additional assistance. Please have the following information ready before you
call:
- Product name and serial number
- Description of your peripheral attachments
- Description of your software (operating system, version, application software, etc.)
- A complete description of the problem
- The exact wording of any error messages

User’s Manual
1
CONTENTS
General Information ................................................................................... 4
1.1 Introduction............................................................................................................................. 5
1.2 Features ................................................................................................................................... 5
1.3 Specifications ........................................................................................................................... 6
1.3.1 General..........................................................................................................................................6
1.3.2 Display...........................................................................................................................................6
1.3.3 Ethernet ........................................................................................................................................7
1.3.4 Audio.............................................................................................................................................7
1.3.5 Power Consumption .....................................................................................................................7
1.4 Environmental Specifications................................................................................................... 7
1.5 Mechanical Specifications........................................................................................................ 8
Hardware Installation ................................................................................11
2.1 Introduction........................................................................................................................... 12
2.2 Switches ................................................................................................................................. 12
2.2.1 CLEAR/COMS -Clear CMOS Data.................................................................................................12
2.2.2 AT/ATX Power on mode selection...............................................................................................13
2.2.3 ACC/Family Mode selector switch..............................................................................................13
2.3 I/O/Button/LED Indication.................................................................................................... 14
2.3.1 Ethernet Connector (POE) ..........................................................................................................15
2.3.2 Power input (DC-IN)....................................................................................................................16
2.3.3 USB..............................................................................................................................................17
2.3.4 VGA .............................................................................................................................................19
2.3.5 DP................................................................................................................................................19

User’s Manual
2
2.3.6 Smart Display..............................................................................................................................20
2.3.7 COM1/2.......................................................................................................................................21
2.3.8 Option CAN /AUDIO....................................................................................................................21
2.3.9 DIO ..............................................................................................................................................22
2.3.10 Remote Switch..........................................................................................................................22
2.3.11 Mini PCIe1/3 .............................................................................................................................22
2.3.12 Mini PCIe2.................................................................................................................................24
2.3.13 mSATA .......................................................................................................................................25
2.3.14 LED ............................................................................................................................................25
2.4 Installation............................................................................................................................. 27
2.4.1 HDD/SSD installation ..................................................................................................................27
2.4.2 SIM1/SIM2 installation ...............................................................................................................29
2.4.3 mSATA installation.......................................................................................................................30
2.4.4 Mini PCIe installation..................................................................................................................32
BIOS Setup.................................................................................................33
3.1 BIOS Description ..................................................................................................................... 34
3.1.1 Entering the Setup Utility ...........................................................................................................34
3.2 BIOS parameter settings.......................................................................................................... 35
3.2.1 BIOS Navigation Keys ..................................................................................................................36
3.2.2 Main Menu .................................................................................................................................36
3.2.3 Advanced Menu..........................................................................................................................39
3.2.4 Chipset Menu..............................................................................................................................49
3.2.5 Security menu.............................................................................................................................53
3.2.6 Boot menu ..................................................................................................................................55
3.2.7 Save & Exit menu........................................................................................................................56
3.3 Updating the BIOS................................................................................................................... 58
Driver Installation ......................................................................................59

User’s Manual
3
4.1 Follow the sequence below to install the drivers: .................................................................... 60
4.2 Installation:............................................................................................................................. 60
4.3 CPU TEMP LED driver............................................................................................................... 61
4.4 Utility Software Reference ...................................................................................................... 61
SYSTEM RESOURCE ....................................................................................62
5.1 WDT and GPIO ........................................................................................................................ 63

User’s Manual
4
General Information
1
CHAPTER

User’s Manual
5
1.1 Introduction
SIGM-2650 is a fan-less reinforced on-board computer, and the mainboard and sub-board are designed
withanall-in-oneno-wirearchitecture.TheSIGM-2650 is equipped with Intel®Apollo LakeE3950CPU,
dual channel (on-board +SODIMM) DDR3L, 1866MHz, up to 8GB, and the 9th generation Intel® HD
core display.
The SIGM-2650 provides 1*DP, 1*VGA, 1*Smart Display, three Display interfaces, 2*POE, 2*USB3.0,
3*USB2.0, 2* isolation COM, 8-bit iso.dio, optional 2*CAN. 2*Mini PCIe with PCIe X1+USB signal,
with dual SIM card slot, support for dual 4G LTE/Wifi/BT/GPS; 1*Mini PCIe with SATA+USB signal,
can be used as a mSATA; 1*Mini PCIe with USB signal. When 2*CAN is selected, this Mini PCIe slot is
occupied. 1*2.5" HDD SATAbay, 1* full mSATA(SATA+USB) for storage.The SIGM-2650-S001 power
supply adopts DC 9~36V, ITPS, and the SIGM-2650-S002 power input adopts the railway standard DC
48/72/110V, which is suitable for the road vehicle, railway vehicle applications.
1.2 Features
Model No.
Specification
SIGM-2650-S001
SIGM-2650-S002
CPU
Intel® E3950
Intel® E3950
Memory
4GB+1*SODIMM
DDR3L
4GB+1*SODIMM
DDR3L
POE
2
2
USB3.0
2
2
USB2.0
3
3
COM
2
2
DIO
8-bit Iso. DIO
8-bit Iso. DIO
Smart Display
1
1
DP
1
1

User’s Manual
6
VGA
1
1
Line out
1
1
Mic
1
1
mSATA
1
1
2.5” SATA bay
1
1
Power input
DC 9~36V, ITPS
DC 48/72/110V
Table 1.1: Features
1.3 Specifications
1.3.1 General
CPU: Intel®Apollo Lake E3950 CPU
System Memory: Dual channel (on-board +SODIMM) DDR3L, 1866MHz, up to 8GB
Watchdog Timer: 255-level interval timer, setup by software
USB: 2*USB3.0 (Type A); 1*USB2.0 (Type A); 2*USB2.0 (M12)
Serial Ports: 1*RS232 isolated (DB9), 1*RS485 isolated (DB9)
DIO：8-bit isolated (DB9), 2.5KVopto-isolated input(H: 5-24V, L:0-1.5V) , opto- isolated output(200mA）
Expansion Interface:
2*Mini PCIe with PCIe X1+USB signal, 2*SIM slot, support 2*4G/LTE/Wifi/BT/GPS
1*Mini PCIe with SATA+USB signal，support mSATA
1*Mini PCIe with PCIe+USB signal, when using 2*CAN, This slot is occupied
Storage:
1*2.5" HDD/SSD bay,
1*mSATA (SATA+USB)
1.3.2 Display
Chipset: Intel Gen. 9th Intel HD Graphics
Display Memory: Shared system memory
Resolution: DP:4096*2160@60Hz, Smart Display:1920*1200@60Hz, VGA:1920*1200@60Hz

User’s Manual
7
1.3.3 Ethernet
Chipset: 2*Intel I210AT
Speed: 10/100/1000 Mbps with POE 802.3af
Interface: M12
1.3.4 Audio
Chipset: Realtek ALC662VD
Interface:1*Line out，1*Mic，3.5mm phone jack
1.3.5 Power Consumption
Input Voltage:
DC 9-36V，with ITPS power management (S001)
Railway standard power input DC 48/72/110V（S002）
Power Consumption: TDP 12V/3.76A (Intel® E3950 CPU, 4GB DDR3L, 128G SSD)
Power Adapter: AC/DC 12V/5A 60W（S001）, S002（adapter is not provided）
1.4 Environmental Specifications
Operating temperature: EN50155 TX: -40～70℃(It can run for 10 minutes at 85℃)
Relative humidity: 10~90% @ 40°C (non-condensing)
Storage temperature: -40 ~ 85°C (-40 ~ 185°F)
Vibration loading during operation: MIL-STD-801G, EN50155
Shock during operation: MIL-STD-801G, EN50155
EMC/ Certification: EN50155, CE/FCC Class B

User’s Manual
8
1.5 Mechanical Specifications
The SIGM-2650 is a fan-less reinforced on-board computer, consists of a mainboard (STX-I720), a sub-card
(ECB-243).
STX-I720 Front
Picture 1.1: STX-I720 Front
STX-I720 Rear
Picture 1.2: STX-I720 Rear

User’s Manual
9
ECB-243 Front
Picture 1.3: ECB-243
SIGM-2650 Front Panel
Picture 1.4: SIGM-2650 Front Panel
SIGM-2650 Rear Panel
Picture 1.5: SIGM-2650 Rear Panel

User’s Manual
10
SIGM-2650 Dimension：
Unit: mm
Picture 1.6 SIGM-2650 Dimension

User’s Manual
11
Hardware Installation
2
CHAPTER

User’s Manual
12
2.1 Introduction
The following sections show the internal switch settings and the external connectors and pin assignments
for applications.
2.2 Switches
The SIGM-2650 box computer has a number of switches inside the chassis that allows you to configure
your system to suit your application. The table below shows the function of each of the board’s switches:
Switcher
Name
Description
CLEAR/CMOS
Clear CMOS Data Setting
3-Pin switch
AT/ATX
Set Power-on mode at AT or ATX
3-Pin switch
ACC/Family
Mode selector switch
3-Pin switch
2.2.1 CLEAR/COMS -Clear CMOS Data
Picture 2.1: CLEAR/COMS
If you encounter the followings
a) CMOS data becomes corrupted.
b) You forget the supervisor or user password.
You can reconfigure the system with the default values stored in the ROM BIOS.
To load the default values stored in the ROM BIOS, please follow the steps below.
1. Power-off the system and unplug the power cord.
2. Dial the dip switch to CLEAR mode, stay for 5~6 seconds, and then revert to CMOS mode;
4. Power-On the computer, press the Del key to enter the BIOS setting and reload the optimal default value;
5. Save and exit the Settings.

User’s Manual
13
2.2.2AT/ATX Power on mode selection
Picture 2.2: AT/ATX
The SIGM-2650 provides an AT/ATX SW, which users can set Power-on mode by it. When you dial it at
AT, it means power on byAC Power; When you dial it at ATX, it means power on by Power button.
2.2.3 ACC/Family Mode selector switch
Picture 2.3: ACC/Family
The SIGM-2650 provides ACC/Familyswitch, and users can set the on-off mode of the machine by pushing
the switch with tweezers. When you put it to ACC mode, it means that power on or power off will delay,
until the voltage is stable; When dialed to Family, the machine is on and off normally.

User’s Manual
14
2.3 I/O/Button/LED Indication
SIGM-2650 Front：
Picture 2.4: SIGM-2650 Front
The front panel contains the I/O interface：
1*DC-in Power: M12 A-Code 5-pole terminal DC9~36V（S001）
1*DC-in Power: M12 A-Code 4-pole terminal DC 48/72/110V（S002）
2*USB3.0 Type A,1*USB2.0 Type A,2*USB2.0 M12 A-Code
1*VGA,1*DP,1*Smart Display
2*POE:M12 X-Code
2*COM: DB9
2*8-bit DIO: DB9
2*Opt.CAN:DB9
2*Antenna
SIGM-2650 Rear：

User’s Manual
15
Picture 2.5: SIGM-2650 Rear
The rear panel contains the I/O interface：
Power button
HDD LED, CPU LEDs , POE LEDs
AT/ATX SW, Clear CMOS SW, ACC/Family SW
2*SIM,1*2.5” SATA bay
1*Line-out,1*Mic
1*Remote SW
2*Antenna
2.3.1 Ethernet Connector (POE)
The SIGM-2650 is equipped with 2*Intel® I210AT, the Ethernet provides M12 interface, with POE
function, and supports 802.3af (15.4w). Table 2.1 for pin assignments.
Picture 2.6: POE
Table 2.1: POE Connector Pin Assignments
Pin
Signal
1
TXD0+
2
TXD0-
3
TXD1+
4
TXD2+
5
TXD2-
6
TXD1-
7
TXD3+