John Lewis 57040191 User manual

John Lewis Partnership
171 Victoria Street
London SW1E 5NN
johnlewis.com
Made in China Please retain these instructions for future reference
Care instructions
Wipe clean with a soft cloth.
Maximum load of 8kg.
SHELF WITH 8 HOOKS
USER GUIDE
Assembly instructions
Place template (B) on the wall.
Please use a spirit level to
ensure that the template is
straight. Drill the required holes
in the wall using the template
and follow the guidance on
the 'Wall Fixings' section.
Step 1 Insert the wall plugs (C).Step 2
Insert the wall plug (C). Hang the hook rack
(A) and screw the screw (D) through the
metal plate.
Step 5
Screw in the screws (D).Step 3
Hang the hook rack (A) and mark the hole
for the metal plate.
Drill the hole as marked.
Step 4
B
Warnings!
The fittings pack contains small items which should be kept away from young children.
C
D
D
A
AA
C
D
Product Code:
57040191

Pre-assembly
preparation
No. Picture Name
Hook
Rack 1
Qty
A
No. Picture Name
Template 1
Qty
B
Wall
Plug 3
CScrew 3 D
Fittings and parts
checklist
Helpful advice
before you begin
1. We suggest you spend a short time reading through this leaflet and then follow
the simple step by step instructions.
2. Do not discard anyof the packaging until you have checked that you have all the
3. Assemble this product on a soft surface.
4.
tightened during initial assembly. Only upon completion of the assembly should all
5.
fullytightened.
6.
7. Do not use anyother tools other than those recommended to build this product.
Keep out of reach of small children. It contains small parts which might present a
choking hazard.
You can use one of the following types of wall plug if your walls are made of brick,
breezeblock, concrete, stone or wood.
Warning:
installer.
Important - When drilling into the walls always check that there are no hidden
wires orpipes etc.
Take care when drilling onglazed tile surfaces in case the drill slips.
KEY INFORMATION
General Purpose wall plug
Generallyaerated blocks should not be used to support
loads, general – purpose wall plugs can be used.
Plasterboard wall plug
For use when attaching light loads on to plasterboard
partitions.
Cavity Fixing wall plug
For use with plasterboard partitions or hollow
wooden doors.
Cavity Fixing – Heavy Duty wall plug
such as shelving, wall cabinets and coat racks.
HammerFixing wall plug
For use with walls stuck with plasterboard. The hammer
retaining wall.
Shield Anchor wall plug –Heavy loads
For use with heavierloads such as TV and Hi-Fi
speakers and satellite dishes etc.
FIXINGS
GUIDE TO WALL MOUNTING & FIXINGS
Phillips head screwdriver
and spirit level required
Thank you for purchasing this product. Please read the instructions and check pack
contents carefully before starting assembly of this product. A full checklist of
components is given in this leaflet. If any components are missing please contact
John Lewis and partners customer services.
This product will take 1 person approximately 30 minutes to assemble.
The fitting pack contains small items which could present a choking hazard and should
be KEPT AWAY FROM YOUNG CHILDREN.
Read this leaflet in full before commencing assembly.