John Lewis Lymington 1 drawer bedside 803 19502 User manual

Lymington 1 drawer bedside
Stock number bone: 803 19502
H62 W35 D35.3cm
Stock number cloud: 803 19402
Stock number snow: 803 19302

Tools required
Time to assemble
1
Thank you for purchasing the Lymington 1 drawer bedside. Please read the instructions and warnings carefully
before use, to ensure safe and satisfactory operation of this product.
At John Lewis, we are committed to making great products possible.
From our in-house Design Team, to our Buyers, we work together to bring great design to life.
Our expert Product Technologists work collaboratively with our buyers and suppliers to assure the legality, safety
and quality of the product we sell.
We are all committed to designing and developing products to the highest industry standards.
We hope you are happy with your product and welcome any feedback or comments you may have.
The John Lewis Team
10 Minutes
People to assemble

Important safety information
Warnings
The product should only be used on firm, level ground.
Keepsmall parts out of reach of children.
Ensure the product is fully assembled as illustrated before use.
Do’s
Check the pack and make sure you have all the parts listed.
Check all screws or bolts are tightened and inspect regularly.
Make sure the legs remain in contact with the ground at all times.
Don’ts
Do not over tighten screws or bolts.
Do not stand on the product.
Do not use power tools to construct as overtightening and panel failure may occur.
2
01244 689949

3
Product assembly
Lymington 1 drawer bedside
803 19502
803 19402
803 19302
Step 1
Tools
Warning
Serious or fatal crushing
injuries can occur from
furniture tipping over.
To prevent this furniture
tipping over it must be
permanently fixed to
the wall.
THE DRAWER HANDLE IS PRE-
ASSEMBLED REVERSELY. DISASSEMBLE
THE HANDLE AND RE-ATTACH.
Step 1
Step 2

Lymington 1 drawer bedside
803 19502
803 19402
803 19302
Step 2
Ready to use
4

5

Care guide
Care and maintenance
Wood furniture
Wood displays different grain patterns depending on which way they are cut - for example, the ‘medullary ray’ which
can appear on oak furniture is a mark of good quality timber - these are just characteristics of the natural beauty of
the wood. Some furniture is also deliberately aged and rustic.
Wood veneers also allow a distinctive pattern to be created on some surfaces, such as tabletops and drawer fronts
by the way slivers are arranged.
All timber and veneer surfaces will change colour and mellow over time. New furniture will initially vary in shade
from items that have been previously purchased.
How to care for your wood furniture
Furniture with a hard lacquer, wax polish or painted surface should be dusted with a dry cloth.
Waxed furniture will need to be given a coat of beeswax a couple of times a year to help maintain its lustre.
Spray polishes are best avoided as they contain silicones which may spoil the furniture’s surface when building up
over time.
Make sure all surfaces are protected from heat and liquids by mats and coasters. Wipe up spills immediately and
ensure that a mat or pad is placed under paper if you are writing.
Our furniture will endure most temperatures in the home, but it is best to avoid placing furniture next to heat
sources such as radiators or fires. Be particularly careful with solid wood as the lack of humidity caused by some
home heating can cause damage such as warping.
Safety instructions
Never drag furniture when moving it. Always lift it.
Periodically check all fixings to ensure none have come loose and retighten when necessary.
Please take care when handling or moving the furniture as careless handling may cause damage or injury.
Furniture can be dangerous if incorrectly installed. Assembly should be carried out by a competent person. No
liability will be accepted for damage or injury caused by incorrectly installed or assembled furniture.
This product complies with BS EN 14749:2016 and BS 4875-7:2006.
If you require any additional information or have any issues with this product please call the John Lewis helpline
on 03456 049 049.
If you require spare parts or further technical assistance please call 01244 689949 or email [e-mail].
Retain these instructions for future reference.
John Lewis Partnership
171 Victoria Street
London SW1E 5NN
johnlewis.com