John Lewis Morgan Story Time 803/67801 User manual

Morgan Bunkbed
Thank you for purchasing this Morgan Bunkbed.
Please read the instructions carefully before use to ensure safe and
satisfactory operation of this product.
Stock Code : 803/67801
For product support or spare parts
please call the John Lewis helpline:
Tel: [phone]
Email: [email protected]
Pre-assembly preparation
Please ensure instructions are read in full before attempting to assemble this product.
Necessary Tools
Please check the pack contents before attempting to assemble this product. A full checklist of
components is given in this leaflet. If any components are missing, please contact the John Lewis
helpline.
This product is HEAVY. It should be assembled as near as possible to the point of use. TAKE CARE
WHEN LIFTING to avoid personal injury and (or) damage to the product.
This product should take approximately 90 MINUTES to assemble with 2 PEOPLE.
The fittings pack contains SMALL ITEMS which should be KEPT AWAY FROM YOUNG CHILDREN.
Read this leaflet in full before commencing assembly.
If you require any additional information or have any issues with this product please call the
John Lewis helpline on 01244 689949 or email: [email protected]
1/11

2/11

AB C
D E F
G H
22 pcs. - Bolt M6 x 90mm1 pc. - Allen Key - 4mm 33 pcs. - Dowel 10 x 40mm
22 pcs. - Barrel Nut - M6 x 13mm 16 pcs. - Screw 7 x 50mm 68 pcs. - Screw 4 x 30mm
6 pcs. - Screw 4 x 40mm 4 pcs. - Dowel 10 x 50mm
878 x 986mm
70 x 1460mm
70 x 1156mm
Please note position
of Mattress Level Mark
3/11

1
C
C
C
C
C
CC
C
C
C
C
C
4
5
8
9
12
7
6
C x 33
2
EEEE
EE
EE
10
11
12 12 12 12
E x 8
Assemble on
Soft Surface
4/11

3
B x 4
D x 4
B
D
D
B
34
5
D
D
Please Note: Part attaches to the Ladder
5
4
B
B
3
D
D
5
3
B x 4
D x 4
4
5/11

4
5
D
B
1D
Please turn Parts & so the holes face the wall
67
B
5
B x 6
D x 6
6
B x 6
D x 6
5
4
D
D
B
B
B
B
1
2
D
D
D
6
7
6
7
D
6/11

7
H x 4
8
F x 8
7/11

9
E x 4
10
F x 60
8/11

11
B x 2
D x 2
E x 4
9/11

12
G x 6 G
G
G
G
G
G
13
13
PLEASE NOTE
The top of the mattress MUST NOT exceed
this marking
(Max. height 17cm)
10/11

Care and Maintenance
Safety Instructions
General warnings:
All assembly fastenings should always be tightened properly and care should be taken that no
fittings are loose.
The maximum thickness of the mattresses should not be more than 17cm and the upper surface of
the mattress should not be more than the mattress maximum thickness marking.
WARNING: Do not use the bunk bed if any structural part is broken or missing.
WARNING: Children can become trapped between the bed and the wall, a roof pitch, the ceiling,
adjoining pieces of furniture (e.g. cupboards) and the like. To avoid risk of serious injury the distance
between the top safety barrier and the adjoining structure shall not exceed 75mm or shall be more
than 230mm.
WARNING: High beds and the upper bed of bunk beds are not suitable for children under six
years due to the risk of injury from falls.
This product complies with BS EN 747-1+2:2012+A1:2015.
If you require any additional information or have any issues with this product please call the
John Lewis Helpline on 01244 689949 or email [email protected].
This bed is for use with a standard single size mattress L190 x W90 x H17.
John Lewis Partnership 171 Victoria Street London SW1E 5NN
www.johnlewis.com
This Morgan bunk bed should be cleaned by dusting with a dry cloth.
Never drag furniture when moving it. Always lift it.
Do not drag any object across the bed as this can cause permanent damage.
Periodically check all fixings to ensure none have come loose and re-tighten when necessary.
Please take care when handling or moving the furniture as careless handling may cause damage or
injury.
Furniture can be dangerous if incorrectly installed. Any assembly should be carried out by a competent
adult.
No liability will be accepted for damage or injury caused by incorrectly installed or assembled furniture.
During assembly, children should be kept away from the product due to possible risk of injury.
It is recommended that care is taken when moving heavy objects to a new location to avoid personal
injury or damage to the furniture. Please be careful to retain all fittings when doing this.
11/11
WARNING: Bunk beds and high beds can present a serious risk of injury from strangulation if not
used correctly. Never attach or hang items to any part of the bunk bed that are not designed to be used
with the bed, for example, but not limited to, ropes, strings, cords, hooks, belts and bags.
Always follow the manufacturer’s instructions.
Ventilation of the room is necessary in order to keep the humidity low and to prevent mould in and
around the bed.