John Lewis ZELLA UPLIGHTER User manual

Caring for
your product
Aftercare and
Troubleshooting
Specification
5 year guarantee
Recycling
User Guide
Please retain these instructions for future reference
John Lewis Partnership
171 Victoria Street
London SW1E 5NN
johnlewis.com
Made in China
indicates that this product should not be treated asThis symbol
This product should be kept away from combustible materials (eg. curtains)
It is advisable not to leave a lit lamp unattended.
Always use the correct type and wattage bulb. Never exceed the wattage stated.
When changing a bulb, always switch off at the mains and allow the bulb to cool down
before handling.
Dispose of used bulbs carefully.
The bulb and surrounding parts can become extremely hot during use.
This product uses halogen lamps; please do not touch with bare fingers.
This lamp is supplied with safety glass shields; please ensure these are in place before
use.
Please ensure the stated minimum distance is maintained at all times –the minimum
distance symbol is shown here.
If the external cable or cord of this luminaire is damaged it shall be exclusively replaced
2 x 6W E27 LED,1 x 4W G9 LED
Voltage: 220 –240V, 50Hz
IP rating: 20
Weight: 7.3kg
At John Lewis & Partners we test every light to high quality standards
so we are able to offer you a 5 year guarantee.
normal household waste and it should be recycled. John Lewis &
Partners do not operate instore take back, but as members of the
Distributor Take Back scheme have funded the development and
upgrade of recycling facilities across the UK. Please take it to your nearest
collection facility or for further details contact your local council or visit
www.recycle-more.co.uk.
We recommend cleaning with a soft dry cloth. Do not use abrasive materials as these
will damage the finish
Indoor use only.
Replace bulbs from John Lewis or established brand of the same type and
compatibility.
ZELLA UPLIGHTER

Product assembly
1Carefully remove the floor lamp from the box and lay
out on a flat surface. Remove black bushes from the
end of the metal tube,then insert the end of tube into
the ball joints.
Tighten grub screws with Allen key provided.
2
Remove black bushes from end of tubes then screw
end of tube into centre body section.
Screw the other tube with the cable going through into
the other side of the centre body section.
3
Pull up the base and remove the plastic bag, then insert
the 2 tubes with the thread on the end through the holes
in the base with the 2 holes spacer bracket, then tighten
the washers and nuts with toolprovided.
Assembly
4
Screw the bulbs into position in the uplighter
5Screw rod lever to reading lamp section for adjustment
as the lamp can become hot.
Switch on the electricity supply at the fuse board. The
maximum power indicated must not be exceeded.
01 02
Description Image Quantity
AAllen key
BRod lever 1/PCS
CWench 1/PCS
DGrub screws 2/PCS
Warnings
Parts list
Please assemble as per the below diagrams. Please read
the instructions carefully before use to ensure safe and satisfactory
operation of this product. Please keep these instructions for future reference.
If the external cable or cord of this luminaire is damaged it shall be exclusively replaced
Please ensure the stated minimum distance is maintained at all times – the minimum distance
symbol is shown here.
This product should be kept away from combustible materials (eg. curtains)
It is advisable not to leave a lit lamp unattended.
Always use the correct type and wattage bulb. Never exceed the wattage stated.
When changing a bulb, always switch off at the mains and allow the bulb to cool down
before handling.
Dispose of used bulbs carefully.
The bulb and surrounding parts can become extremely hot during use.
This product uses E27 LED & G9 LED lamps; please do not touch with bare fingers.
This lamp is supplied with safety glass shields; please ensure these are in place before use.
Please read the instructions carefully before use to ensure safe and satisfactory operation of this
product.
Introduction Thank you for purchasing this Zella uplighter.
x1