John Thomas S-924 User manual

ITEM :
S
-
924
ISSUED SEP 23, 2014
Printed in Vietnam
- 1 -
ASSEMBLY INSTRUCTIONS
Description
Item No.
:
24 IN RANCH STOOL
: S-924

ITEM :
S
-
924
ISSUED SEP 23, 2014
Printed in Vietnam
- 2 -
BEFORE ASSEM
B
LY
Thank you for purchasing this quality product. This product has been designed for easy assembly and
constructed for durability. All parts were checked prior to packaging to insure quality. Prior to beginning
assembly, however, make sure all parts and hardware are included and free of obvious defect. If a part is
missing or defective, please contact the store where purchased. If hardware is missing, or you need help with
assembly, please call toll free 888-944-8396.
IMPORTANT NOTE:
-Place all wooden parts on a clean and smooth surface such as a rug or carpet to avoid the parts from
being scratched.
-Remove all wrapping material, including staples & packing straps before you start to assemble.
-DO NOT tighten all screws and bolts until completely assembled.
-Keep all hardware parts out of reach of children.
BBEFORE AS
PART
LIST
When unpacking, please carefully not to discard any parts with the packaging. Before continuing,
please make sure you have all of the following parts:
NO Description Qty Sketch NO Description Qty Sketch
A Side Frame 2 B Top Seat 1
C Rail 2
ASSEMBLY TOOLS REQUIRED
NOT INCLUDED

ITEM :
S
-
924
ISSUED SEP 23, 2014
Printed in Vietnam
- 3 -
HARDWARE LIST
When unpacking, please carefully not to discard any parts with the packaging. Before continuing,
please make sure you have all of the following hardware:
NO Description Qty Sketch NO Description Qty Sketch
1 Screw
(M4 x 40mm) 8
STEP 1
Attach the side frame (A) to the Top seat (B) with screws (1), as shown below. Tighten with a
screwdriver
Then attach rail (C) to side frame (A) with screws (1). Tighten with a screwdriver.