John Thomas T-4066XXTT User manual

ITEM
:
T
-
40
66
XX
T
T
AND T
-
51B OR T
-
52B OR T
-
53B
(PACKED IN SEPARATE BOX)
REVISED SEP 16, 2014
Printed in Vietnam
- 1 -
ASSEMBLY INSTRUCTIONS
T-4066XXTT AND T-53B
T-4066XXTT AND T-51B
T-4066XXTT AND T-52B
Description : FARMHOUSE EXTENSION TABLE
Item No : T-4066XXTT AND T-51B OR T-52B OR T-53B
(PACKED IN SEPARATE BOX)

ITEM
:
T
-
40
66
XX
T
T
AND T
-
51B OR T
-
52B OR T
-
53B
(PACKED IN SEPARATE BOX)
REVISED SEP 16, 2014
Printed in Vietnam
- 2 -
BEFORE
ASSEMBLY
Thank you for purchasing this quality product. This product has been designed for easy assembly and
constructed for durability. All parts were checked prior to packaging to insure quality. Prior to beginning
assembly, however, make sure all parts and hardware are included and free of obvious defect. If a part is
missing or defective, please contact the store where purchased. If hardware is missing, or you need help with
assembly, please call toll free 888-944-8396.
IMPORTANT NOTE:
-Place all wooden parts on a clean and smooth surface such as a rug or carpet to avoid the parts from
being scratched.
-Remove all wrapping material, including staples & packing straps before you start to assemble.
-DO NOT tighten all screws and bolts until completely assembled.
-Keep all hardware parts out of reach of children.
WARNING:
Long exposure to rubber or soft plastic may cause a chemical reaction and damage the finish of your
table. Protect the surface of the table with cloth if you are using any product with rubber feet or base.
PARTS LIST
When unpacking, please be careful not to discard any parts with the packaging. Before continuing, please make sure you
have the following parts:
N
O Description Q’ty Sketch NO Descripti on Q’ty Sketch
A Top 1 B TABLE
LEAF 2
C LEAF APRONS Lx2pcs
Rx2pcs
ASSEMBLY TOOLS REQUIRED

ITEM
:
T
-
40
66
XX
T
T
AND T
-
51B OR T
-
52B OR T
-
53B
(PACKED IN SEPARATE BOX)
REVISED SEP 16, 2014
Printed in Vietnam
- 3 -
NO Description Qty Sketch NO Description Qty Sketch
D
LEGS
(T-51B) 4
E CENTER
LEGS
(T-51B)
1
D LEGS
(T-52B) 4
E CENTER
LEGS
(T-52B) 1
D LEGS
(T-53B) 4
E CENTER
LEGS
(T-53B) 1
HARDWARE LIST
When unpacking, please be careful not to discard any parts with the packaging. Before continuing, please make sure you
have all of the following hardware:
NO Description Q’ty Sketch NO Description Q’ty Sketch
1 Flat washer
(8.5x19mm) 9 2
Hexagon nuts
(M8x13mm)
9
3 Lock washer
(8.5x13mm)
9 4 Wrench
(M8x13mm) 1
5 Wood screw
(M3.5x15mm) 8
NOTE: HARDWARE IS PACKED IN CARTON OF LEGS T-51B, T-52B, T-53B
PARTS LIST LEGS T
-
51B OR T
-
52B OR T
-
53B
PARTS LIST LEGS T
-
51B OR T
-
52B OR T
-
53B

ITEM
:
T
-
40
66
XX
T
T
AND T
-
51B OR T
-
52B OR T
-
53B
(PACKED IN SEPARATE BOX)
REVISED SEP 16, 2014
Printed in Vietnam
- 4 -
STEP 1
Attach legs (D) and (E) to the top (A) with washers (3) and (2), and nuts (1) as shown below.
Tighten with the wrench (4).

ITEM
:
T
-
40
66
XX
T
T
AND T
-
51B OR T
-
52B OR T
-
53B
(PACKED IN SEPARATE BOX)
REVISED SEP 16, 2014
Printed in Vietnam
- 5 -
STEP 2
Attach aprons (C) to leaves (B) with screws (5). Tighten with the screwdriver
STEP 3
Unlock the table top from both sides underneath of the top as shown below.
Pull the 2 parts of the table top apart.

ITEM
:
T
-
40
66
XX
T
T
AND T
-
51B OR T
-
52B OR T
-
53B
(PACKED IN SEPARATE BOX)
REVISED SEP 16, 2014
Printed in Vietnam
- 6 -
Place the leaves (B) in the center of the top as shown below.
Push the table top closed. Lock the mechanism underneath 2 sides of the table top as shown below.
STEP 4